Corsair VENGEANCE LPX DDR4 RAM 16GB (2x8GB) 3000MHz CL16 Intel XMP 2.0 Computer Memory - Black (CMK16GX4M2D3000C16)

I recently purchased the Corsair CMK16GX4M2A2400C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 2400 MHz C16 XMP 2.0 High-Performance Desktop Memory Kit in black, and so far, I’m very pleased with its performance. After installation, both modules seem to be working flawlessly, providing the smooth and reliable operation I was hoping for.That said, I did have a slight hiccup during setup when my PC initially refused to power up properly. This turned out not to be the fault of the memory kit but rather a minor issue with my GPU—likely caused by dust in the port or it being knocked slightly out of position during the installation process. Once I reseated the GPU, everything booted up perfectly.Aside from its excellent performance, this memory kit comes at a fantastic price, making it a great value for anyone looking to upgrade their system. Its sleek black design complements my PC setup beautifully, and enabling XMP was straightforward, giving me optimal performance right out of the box. I would highly recommend this to anyone seeking high-quality RAM that doesn’t break the bank!

This is a good mid range memory module for DDR4. Not hitting the max of 3200, it does performs adequately and is cheap as chips at the moment.The are single channel, so bear that in mind when purchasing. If you are running a single stick these are OK bang for buck.

I purchased this set a couple of years ago and its been great, but recently I wanted to do some video editing and was looking at dual channel 32GB sets but then thought I would try just buying another set and running 2 x dual channel and it works perfectly. Booted up with no issues and games run fine, I can see the extra memory in task manager and was also able to enable the XMP profile in the BIOS and push the sticks to 3200mhz. This RAM is so stable and reliable, very happy!

This 16GB does everything you'd expect from a kit of ram, it is stable at 3000MHz using the XMP Profile, the installation was easy enough, and the height was just low enough to allow clearance for my CPU cooler to fit without any issues.I have tried to overclock these and I will say it is possible to hit 3200MHz. Still, it doesn't really gain you much benefit for the extra push, so if you needed more performance from your ram, I would be looking to buy some 3600MHZ speeds that would be stable from day 1, rather than trying to push this beyond its limits.✪ Would RecommendConsider following me for more Quick Fire Reviews on other random products that you might be interested in.

Premium product at a premium price. Ram was plug and play, no issues, running smoothly.

I've had 16GB of this RAM for 4 years and recently upgraded to 32GB by buying 2 more sticks. No complaints whatsoever, but make sure you enable XMP/DOCP in bios to get the stock 3000MHz (I was stupidly on 2133MHz for the first 3 years when I didn't know better). Or even better, you can overclock it super easily without having to mess with timings. I went to 3200MHz with absolutely no issues, and now I have it clocked to 3600MHz with everything being stable. Highly Recommended piece of hardware. A+++FYI I have an AMD Ryzen 9 5900x CPU, Gigabyte B550-M Motherboard, and GTX 3070 GPU.

A warning for anyone buying this:The RAM does work great, as long as you install it properly. You will be suprised how much pressure is needed to slot them in - I reopened my case several times to make sure they were correctly pressed it. You should hear a "click" when it slots in right.However, this wasn't my main issue. When I installed the sticks initially, my PC would not boot: the fans and LEDs would come on but the Motherboard itself wouldn't kick in, causing the PC to turn off and on in a 15 second cycle. When I unplugged the sticks, it would boot normally.The solution to this is to restart your CMOS. On your motherboard, there will be two pins with the words CMOS_CLR underneath. Sometimes, there is a button, othertimes there is no button and you must remove your battery for 15 minutes - a huge hassle imo but this is your call. Luckily, I simply had to press a screwdriver against the two pins above CMOS_CLR, which shortcircuits the CMOS, which essentially resets the PC's hardware factory settings. I am a total novice so this was pretty terrifying, however, after I did this the RAM worked absolutely fine and now I have 16Gb of speedy RAM. I have a GIGABYTE motherboard for ref.When I googled the issue initially, many said a LOT of RAM sticks simply won't work together, due to the production method of creating RAM. However, these sticks were exactly the same as the ones already installed in the PC, hence I found this a little odd. If you're having the same issue (PC won't boot but fans come on when extra RAM is installed), simply clear your CMOS using the instructions above.