CRAFT RESIN 1 Gallon Crystal Clear Epoxy Resin Kit with Pumps - Food Safe & UV Resistant for DIY Art, Wood, Jewelry Making, Coasters, Mold Casting Resin Epoxy - Low Viscosity for Beginners & Pros

I’ve used this epoxy resin for several craft projects large and small pieces in my silicon molds. It mixes easily with the 1:1 ratio and pours smoothly without being too thick. I have good clarity after curing and the pump bottles make measuring simple with the gallon containers I recently upgraded to. This works well for my crafts and professional projects and easy to use also if you’re a beginner in the resin world.

Works well for many different techniques. Comes with pumps (which I don’t use) and silicone stir stick. Gallon size is perfect for me-easily poured to measure. Low viscosity so bubbles easily removed for most projects (torch or heat gun). I mix by hand 3-5 minutes always comes out perfect. Need temps above 70 for good results

I never really write reviews but thought this would be a good one to provide for beginners. I used this resin for my 2nd resin project and it came out beautiful. Granted I’m no expert at this resin hobby, and it was barely my second project, but using this product was fairly easy. Takes patience and time but overall I didn’t find the product to be difficult to work with and not as many bubbles as the first resin I used. Also dries way faster than 24 hours. I did a thick rectangle tray and it dried overnight about 10 hours, however I did it in sections by only pouring a quarter inch of resin on each time and allowing it to cure then adding another layer. Took a couple of days but I think for second time using resin it came out really good.

This is great epoxy resin. Easy to work with. Used it for decorative furniture molds as well as for a sofa table inlay. My only complaint is the seal on the top of the containers. Seems stupid, but I couldn't really get them off and they are plastic with foil. Plastic bits ended up in my pours and while for the molds it wasn't an issue, but the for the inlay I had to pick them out with tweezers and ended up have to sand a few out. The one gallon size did not have this problem.

I've been using Craft Resin for a while now, and this 2-gallon kit with the convenient pumps has become an absolute staple in my workshop. The crystal-clear finish is flawless every single time — it cures beautifully with a super high-gloss shine that looks professional and glassy. No yellowing, even on pieces I've left out in the sun, thanks to the excellent UV resistance. What I love most is how versatile and beginner-friendly it is while still delivering pro-level results. The low viscosity makes mixing and pouring a breeze with minimal bubbles, and the 1:1 ratio with the included pumps means no messy measuring cups or guessing. It's also food safe once fully cured, which gives me peace of mind on certain projects. I've used it for so many things: beautiful custom coasters that turn out perfectly smooth and durable, intricate jewelry pieces with embedded flowers or glitter that pop, and even knife handles! The resin works amazingly well for stabilizing and coating wood scales on knives — it creates a rock-hard, moisture-resistant finish that feels premium and holds up beautifully to daily use. Whether you're just starting out or a seasoned maker, this kit is worth every penny. The pumps save so much time and reduce waste, and a little goes a long way. If you're looking for reliable, high-quality epoxy for art, woodwork, molds, casting, or creative projects like mine, stop searching — this is the one. Highly recommend!

Product was high quality and easy to use! I am a beginner with resin, and I was able to make several small items that turned out better than I had hoped!

A very good epoxy resin to work with. I enjoy the turn around time for curing and getting it finished. It's clear and the self leveling is great. I can finish in one day with the amount dryingng time .

This is a good steady reliable resin. I’ve had no issue with not drying or getting yellow. Pours easily. Mixes easily. I did get a lot of bubbles but give it a minute so they can pop and I used a bit of heat to help it along. Definitely wait to cure. It takes a little bit to cure. As it is suppose to. I think I’m on my 7th purchase. So I’m not an expert, but I do give my items to family as gifts so I want them to be nice. It really does flow well. It’s self leveling, that’s great too. Just make sure you’re on a level surface as it will cure uneven if the table/workspace is uneven. Yes I had some bubbles in this picture but it was intentional. It was for me so I wanted to see how it would turn out. (The clear one). The blue one has a bit of a bend because I accidentally had something leaning on my mold. But, no bubbles. As you can see it takes color well too. Or not, maybe you just want to put in flowered like I did. Just so you know these are already 6 months old sitting on a bookshelf, no discoloration.