Hagen AC Impeller Assy F/500

I had picked up a used tank that had some other aquarium stuff with it, one was the AquaClear50 filter, it worked, though only on high flow setting and was noisy because it only had 2 blades.I popped this one in and it pumps better (oblviously) but it is also much qiueter.

Dura bastante tiempo,es un buen reemplazo.

I had an aquaclear 110 for several years when a snail went inside and destroyed the peace and quiet and I had enjoyed before. I wasn't sure what had happened and I tried cleaning it, taking it apart and nothing seemed to work. I talked to my sister who had the same problem before and she told me that often just replacing the impeller shaft and the impeller(if needed) will fix the problem. Without a doubt I was willing to give this a shot.I ordered both and was glad a reviewer had mentioned using the pliers to remove the original impeller shaft as it was a bit tough to pull. Putting in the new one was also a little tricky because I didn't want to bend it. The first time I pushed it in, I didn't quite have it all the way so it made the same grinding sound. I took it apart and sure enough it needed to push in just a little further. After that it has been quiet just like new.

Used to experiment with. Wanted to trim off some material to reduce flow as I was converting a HOB filter into a refugium for my flat water tank. Worked perfect for my application

We have a 40 Gal Breeder tank and AquaClear 70 filter. We use the tank for breeding Neocardina shrimp. The water flow of the AquaClear 70 filter was too strong for our needs. We installed a AquaClear 50 impeller and the reduced water flow is exactly what we want. The 50 and 70 impellers are the same. The difference is the 50 size impeller has 4 blades and the 70 size impeller has 6 blades.

The impeller in an aquarium filter does a remarkable job of moving thousands of gallons of water each day. The fact that they can operate for several years before needing to be replaced is a testament to their overall construction.The Aquaclear series of filters utilize a magnetic impeller assembly with the plastic fan attached to the top of the unit.The Aquaclear 20, 30, 50 and 70 all use the same electric motor and magnetic impeller assembly, the only difference being that the fan attachment for each subsequent filter is slightly larger than its smaller sibling, thusallowing the next size up Aquaclear to pass a greater number of gallons of water per hour.This also gives you some flexiblity in how these filters can be used. For instance, suppose you would like to be able to increase the amount of time between filter cleanings, while maintaining the same water flow that you have with an Aquaclear 50.You can purchase an Aquaclear 70 and swap out its impeller for the one in the Aquaclear 50. This way you have a greater filter surface area, without increasing the turbulence of your aquarium's water.The Aquaclear filters do have an adjustable water flow, however, even at the lowest level, an Aquaclear 70 would be too powerful for say a 10 gallon aquarium.However, with the impeller blade from an Aquaclear 30, installed in an Aquaclear 70, you get the advantage of far greater filter area than the 30, which leads to less frequent cleanings, and you won't have to worry about your fish having to fight the current of the Aquaclear 70's larger impeller fan.Later on, should you decide to move up to a larger sized aquarium, you can then install the impeller that your Aquaclear 70 came with.This flexiblity is just one of the advantages that four of the Aquaclear filters (20, 30, 50 & 70) offer, since they utilize the same electric motor; the only difference being the size of the plastic fans which come attached to the magnetic impellers.There is a reason why the Aquaclear line of hob filters have lasted virtually unchanged for the past 25 years and have a very loyal customer base.An extremely clever design with flexibility in mind.And as a fishkeeper, you need all the flexibility you can get.The Aquaclear's ability to swap out impeller fans, as well as to use a number of different permutations regarding filter media, makes these filters the most cleverly designed on the market.And the fact that they are also workhorses only adds to the satisfaction of owning them, since they do an excellent job of cleaning an aquarium, even though like most aquarium filter manufacturers, their rating tends to be optimistic.For example, if you are buying a 30 gallon tank, pass on the Aquaclear 30 and get the 50, since it will do a better job of filtering your tank - especially if it's overstocked and heavily planted.This author enthusiastically recommends the Aquaclear line of hob filters.

This impeller works for the 20 or 30 gallon hang on back filter from Aquaclear/Fluval. Replaced mine for slower flow in the larger canister and works perfectly

Aqua clear filters are the best hang on tank filters….I’ve had mine for years……a new impeller simply extends its life….no complaints

Fits and runs exactly as the original propeller in my 7 year old aquaclear 30g filter. Will buy again when needed.

El repuesto encaja perfectamente, lo compré para la Aquaclear 30 y va muy bien, además de buen precio y calidad

Bien

Presa per la versione "20" ed è perfetta! Non so se vada bene anche per le versioni più grandi, in teoria fino alla 50 ma non lo so.

Es el repuesto exacto, lo busque un buen rato hasta que lo vi aquí. Es la medida exacta