Raimondi Leveling Clip 1/8" Joint, 1/8" to 1/2" Tile, Bag of 500 pcs, 180BS0003C0500 (red)

I bought the wedges, clips and clip tightening tool. The system works very well. My finished floor looks fantastic- very smooth and every tile is perfectly level and even with the one adjacent to it. I bought 250 wedges which is enough to cover a rather large area when using 1ftx2ft tiles. It is important to use 2 clips and wedges on the long edges of the 2ft tiles as there is enough length that the area near the clip can be well-aligned but the other end of the tile becomes mis-leveled with the tile adjacent to it. I did have several wedges which suffered a break on the side of the wedge when I went to knock out the clips and wedges after the tile had set. Wedges are still usable. This system does require a slight amount of work to remove thinset that may come up between tiles near the clips and wedges. You can simply wipe it off in the gaps away from the edges, but that is not possible against the clips due to the small areas that are hidden or blocked by the clips and wedges. If you remove the clips as soon as the tiles are set, you can usually scrub away the residual thinset, but if you wait a couple days like I did you have to add a little scraping and more vigorous scrubbing to remove the excess thinset. Overall, I love the system and would definitely buy it again. My finished floor is perfectly level and smooth.

As a first time diy tile setter for a home remodel project, these have been very handy. I set 6"x24" wood looking plank tiles. The concept is simple. It spaces the joints as well as minimizing/eliminating lippage. It took some experimenting as anything does. It is important to use the right amount of mortar under the tile. As the wedges are tightened into these clips, the mortar can ooze out onto these and the edges of the tile. After the recommended time for the mortar to set, the vertical piece of these clips are removed by kicking with a boot or a tap from a hammer which is satisfying. The dried/set mortar in the grout lines needs to then be cleaned from the tile which can be a little tedious. I found that lippage was very, very minimal. Using these 1/8" joint spacing did not disappoint. They worked so well we bought additional clips for use in other areas of the house. I'd like to try the smaller size joint spacing for a shower application.In the picture, the haze left from wiping the mortar from the tiles came right off with a light wash after the clips were removed.

This leveling kit (clips & wedges) are outstanding! They made our tiling job a breeze! I am a novice at tiling a shower and bathroom floor. These made everything level with little effort. Make sure you get the tool to tighten also.

Worked as stated, easily installed and removed. Be cautious in handling bulk leveling clips, they are fragile and can be damaged by pressures applied to the 90° break off point.A few had been weakened at some point in transit. Check integrity of T structure prior to installing. If there is any movement at the vertical junction, discard.I used 250 and ordered more for future tiling jobs.

If your doing tile work. BUY THESE!!! They are strong & durable. You will need the shims to make them work right. Don’t settle for the crap at the home stores.

This is a great tile leveling system it makes it to where as an amateur you can do a professional job by keeping all your tiles level and the Gap the the same distance and all your tiles you do have to buy the the other pieces little ramps that help pull the tile together but that's a great system I love them

Not our first tile project. First time with Raimondi leveling clips. We will use them on all future projects we were able to put 470 sq ft of large profile tiles down in about 10 hours and lippage is minimal! We stopped because we ran out of ramps & clips. Great product, highly recommend this system.

Starting tile 33 years ago, First time using Raimondi Leveling clip on 8 inch x 4 feet. And every job I Do I will allway use this clips , 10 jimmy from J & D Tile & Marble.