Fender 250K Split Shaft S-1 Guitar Switch

Works great. I used it on my DIY Strat to split the Seymour Duncan Hot Rail in the bridge position.

I would have given this five stars if the know came with it. I really like the idea of pushing the button in the knob, much better than the more common push - pull type.

I have installed 3 other S-1 switches in my other Strats without issue. This round, I made a pickguard for my older American Standard to convert it to an HSS. I had used the S-1s before for a 7 way mod, and another with a Duncan everything axe set, no issues. This time however, the switching portion worked fine, I used it for a humbucker coil split, but the pot was very noisy at the extremes (near 0 and 10). It actually cut out a few times and I had to jiggle it to get sound back. I spent an entire Sunday troubleshooting wiring diagrams from various sources including Fender and finally tried a standard CTS 250k pot and all the problems went away. I ordered a second S-1 thinking the first was defective, and after installing the replacement, there was the exact same problem again. Fender must have changed their sources for these, and I have concluded they are absolute garbage, and it is an insult to charge over $30 for one. While the design concept for the switch is commendable, the manufacturing and quality control are not there. Shame on you Fender. I'll also mention the Amazon picture is not accurate, the new design is totally enclosed in a black plastic shell, so you cannot clean the pot wipers with Deoxit, nor run grounds to it. Save yourself the effort and disappointment and just use good old CTS 450G pots, and put in a micro DPDT switch in the pickguard. FYI, the push push switches out there are not too great either, I've tried them, and the push pulls are not natural for the Strat knobs (hard to pull). This HSS now came out great with the micro switch, and is perfectly silent. I've been playing and working on guitars for 50yrs, I hope you find this valuable, and both Fender and Amazon read this and do something about the quality issues.

Excelente producto. Nada más que agregar.

The switch is good. Does what it's supposed to do, but it should come with the cap assembly! The switch is useless without the cap but you have to buy that seperatly from another vendor. Amazon has it with a different supplier that you order the switch from. My first order of the cap was "lost in the mail". It was comming from Nashville, TN. I live in Birmingham, Al, three hours away. I finally got a replacement from Amazon a week and a half after I initially ordered it. Why can't the builder of the switch include the cap assembly? So what if you had to pay more for the switch, at least you would have the whole assembly in one bag. That way you don't have to wait to get the rest of the part.

I waited for over two months for all my parts to arrive, and when I finally got around to upgrading all the potentiometers, pickup switch and volume pot on my Squire stratocaster, the final result was disappointing. The S1 switch did not produce any output at low volumes or at peak volume settings ie: when volume was set between 1 and 3/4 there was NO output at all. Output is only present between settings of 5, 6, 7 and possibly 8.. absolutely no sound at 9 and 10.This means having to remove the pickguard and remove the switch then consider my options!

Worked perfect didn't have any issues whatsoever

Good quality parts.

article tel que commandé