RealTruckPredator Pro Steps for Toyota 4Runner | Cab Length, Rust-Proof Aluminum, Textured Black | PRT1458R-TX | Fits 2014-2024 Toyota 4Runner (Does not fit 2010-2019 Limited & 2010-2013 SR5 Models)

Short version: Nice step barsThe Details: I bought these for a 2018 Toyota 4Runner SR5, which did not come with any steps or nerf bars. These arrived in a long box, which appeared in great shape, and the bars were wrapped in foam inside. All hardware was included, nothing missing. Install was easy and straight-forward (grab your socket wrench and a buddy to help hold the bar up), and only took an hour at most. It took a minute to line up the brackets on the passenger side, but that may have been more user-error than anything because the fit of everything was great once the bolts and holes were lined up. Instructions are short and simple, really not much to the install. The hardest part was removing factory bolts, where I somehow busted a socket. Use a simple wrench, skip the ratchets and such, and they should loosen up fine. All in all, I'd buy these again no problem. Good job, N-Fab.

Solid build and easy to install. They look great compared to stock predators, but I wanted them for function. The forward steps could be a few inches further forward. Overall 4.8 of 5.

I did my research before I bought these. I saw that the biggest problem with the other brands was rust. These are aluminum so they will not rust. They are as good in quality as the OEM ones, but look a little better to me. Solid welds and fit up perfectly. I had them installed in 30 minutes.I paid more for these than other brands would have cost, but worth it! They look great on my 4Runner! Very happy with this purchase.

If you would’ve told me that the worst part of this process was just getting them out of the box, I would’ve laughed!? But in all seriousness, N-Fab does a really good job of boxing these bars/steps solidly to protect them.After much research, I went with N-Fab for their styling and decent reviews. I further chose the Predator Pro bars for their non-tubular design, reducing the amount of welds as those seemed to be the biggest knock against N-Fab products. Granted, the decision to upgrade to the Predator bars was a $150 bump in cost, but I personally think they “fit” the body better. The finish/coating is textured and is a still bit glossy, and happened to match the color of my particular vehicle really nicely.Although these steps stick out a bit further than I was expecting (been used to hopping in without anything there for a year), they are also low enough to allow older parents and the shorter members of our family to get in much easier.Install was relatively simple and I had help holding the first bar in place, but figured out how to do the second one myself (hint - use the box they come in as leverage). Tool-wise, I used a 3/8”-drive ratchet and a torque wrench. An impact driver is nice to expedite the process, especially getting the forward set of Toyota factory 12mm bolts out of the rocker panels, but wasn’t necessary. The inside bolt on the mount nearest the front tires is at a bit of an awkward angle - I’d save that one for last when installing. Also, be sure to check the clearance to the back fender and that small rock guard just in front of the rear wheel well - not having the bar far enough forward could possibly pinch the end caps on the bar or give you an unsightly gap underneath the back door. Once all snugged-up, the tolerances were tight and the bars solidly in place. I also probably didn’t need the torque wrench as they were solidly affixed once I couldn’t manually ratchet the bolts anymore, but deep sockets or a 3” to 6” extension bar is a must-have here.Overall, I’m really glad I bought these as an after-market add-on (and glad I did the install myself) versus what the Toyota dealership wanted to charge me to add these when I bought the vehicle.UPDATE: After two winters in the harsh environment of Minnesota winters with road salt, the powder coat on the nose caps of both bars cracked and disintegrated, leaving the whitening and corroding aluminum or metal showing. I filed a warranty claim and some pictures, and true to their word on their warranty, N-Fab sent me two brand new bars…free of charge! Less than a half-hour or work and I have two great-looking step bars in my vehicle once again!

I was SO pleased with these that I was moved to write a review, which I seldom do.I just had to say that I have not been so happy with any purchase I've made in a long time!I searched for a LONG time because I grew up in the off-road world of ATVs, Dune Buggies, Motocross, 4x4s, etc...but I've never liked the "nerf" tubes look. These were exactly what I wanted for my new 2021 4Runner.These things are girthy! Very solid, heavy-duty construction and no problem putting them on in my driveway, in probably less than an hour total. Bravo, guys...Excellent product!

NFab great product & design on your Epyx series! OEM quality steps do not feel or look cheap. Great investment for my 5th Gen 4Runner. Straight forward clear installation only took about 45 mins. Added value & attitude. Hope to enjoy for a long time!

More foot room than factory steps

I love the running boards and how easy it was to install and very sturdy to. The reason I gave it a 4 star was I got them on November 02,2021 so not happy they are already having some rust spots on then. So for only having them for one year and six months not happy that the top of them are rusting already I only have the rust on the passenger side only and I take great care of my vehicles.