ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA, Dimensional Accuracy +/-0.03mm, 1kg 1 Spool(2.2lbs),Orange

I wasn't sure how good this filament would be as it is a reasonably budget price, but I found it to be excellent, allowing me to produce an excellent print of a Space 1999 Eagle One among a whole bunch of other items all without any breaks, bubbles, blockages or any other problem. Would buy this brand again without hesitation. Pictures of the components and completed model are attached, these were printed on a Creality Ender 3, temp 200c, bed 60c.

OK, so Ive been using this filament for a few days now and I have to say that is certainly fulfils my needs and exceeds my expectations.I had been having problems with my Creality CR-10S printer for a few weeks now and was unable to get a reliable print. This is mainly down to the settings of my printer not the filament, so as you can imagine I was reluctant to start using this as I feared I would not get a good print. However, I gave it a try and immediately noticed a difference. Stringing was reduced. However, I reduced my temp settings to 190 (The minimum this filament it claims to work well at) and voila, all stringing was gone. This is sompared to a slight stringing with my regular filament.Now, Ill be honest, I havent tried using premium filaments so I cnant compare this to the "big boys" however, this has performed really well for me. What you have to remember is that if you get a bad print it could be the filament but equally it could be any one of lots of other settings such as bed leveling, temp, flow rate, o, the list goes on. However, this filament seems to be quite forgiving.In addition, because they are an Amazon seller I can have this delivered to a locker close to my place of work, so I dont have to worry all day if a courier has thrown my package over the fence, not been able to deliver or not even bothered trying.So, my thoughts before I tried this?Well, at £14 a 1kg roll compared to £20 for my regular brand (Which in itself is quite cheap) I thought I would carry on using it as long as it worked). I mean, £6 a roll is a MASSIVE saving, in fact its a case of buy 4 get one free....effectively.However, I will not be continuing to buy this because of the price. I will continue to buy this because its a good quality filament.Buy it for the price, buy it for the quality, makes no difference.I spoke to Eryone before I bought this and asked them a few question and Ill summarise the answers.Why is this so cheap?Well, its cheap because Erone make and sell their own filaments. This means that there is no reseller taking their cut. This means that the savings can be passed on to you the consumer.You only have two colours. Are there plans for more?The reason they only have two colours is because they are a newish company. They have started off with the most sought after colours and in the future they plan to introduce more colours. I have suggested they introduce purple as I like that colour LOLDo you have a facility to give away free samples so people can test the product or colour?After explaining that the supplier I regularly use gives away a 10M free sample with every spool sent out in a colour of your choice Eryone thought the idea was nice and they would certainly look into the idea themselves. Now, at the price they are selling their filaments Im not sure if they would be able afford to be able to do that.CONCLUSIONI am more than happy to make Eryone my number one supplier for filaments. However, as they only supply black and white at the moment Ill only be able to get that from them. Ill continue to use my previous supplier for coloured filament but for blacks and whites these are now my number one "Go-To" suppliers.

Your browser does not support HTML5 video.  Updated 20.03.19First 30m of black filament sent was bone dry and brittle, prints would not bond and repeatedly failed.The remaining roll appears to be ok, but can safely say will not be purchasing anymore filament from ERYONE!Due to failure of filament (tangle) seller kindly sent new roll I'm yet to test but if quality of filament is good as others purchased do not expect any issues.Updated 29.12.18. Unfortunately down to last 80m or so and huge tangle tried to pull out but got to around 20m and gave up.Original ReviewPrinted using CR10 Mini prints lovely at 210C / 65Bed / 60mms will be buying more!

I needed some white filament and somone recommended I try the Eryone filament. I’ve always found white filaments to be either translucent, almost clear, or give a chalky finish, which I don’t like.This one however, is perfect. It prints with a lovely gloss finish and a deep white colour. I couldn’t be more pleased with the results.Also, the roll comes perfectly spooled, unlike 90% of filamant rolls I’ve revived in the past, so the worry of tangled and failed prints won’t be the result of poor spoiling of the filament.Overall this is probably the best filamant I’ve used and the price is unbelieveble. I’ve paid three times for half the quality.I can’t recommend this filamant highly enough. Especially at the price. I can’t wait to try their other colours and I think they’re going to be my regular choice from now on.The Stormtrooper Turtle was printed at 215°/60°, 0.2 layer height at 50mm/s on my Wanhao Duplicator i3.

I bought this for my Ender 3 Pro because during crisis some other brands I felt more comfortable with weren't available.I've just thrown a nearly 90% full reel of in the bin. Massive amounts of underextrusion problems & clogs as a result. Tried temps between 200-230, way beyond the recommended for this filament and still no good prints. No problems with adhesion but then I do spray my bed with adhesive before each print.The biggest problem BY FAR and the reason i've tossed it - BRITTLE. Every single morning when I wake up where the printer has been idle of night, the filament between the Reel and Extruder is snapped. 6 times i've had to take off my bowden tube because there's filament snapped in there. I've never had a single snap or break with any PLA i've ever tried in the past but this one just falls apart with a slight bend.Do not buy.Don't think "oh it's 90% good review, i'll be fine." - Nope. do not buy. don't risk it.