Lynn Manufacturing Replacement Quadrafire Baffle Board, 5700 ACT, Step Top, 832-3430, 2368A

This fit perfectly in my Quadrafire 4100i. Have not burned any wood since I installed. So I can't comment yet on the longevity of it. Hopefully it lasts for several seasons, it is a bit pricey.

It fit well, slide right in to the spot. Product was great, just a bit high on the price.

Are these genuine Quadra stove parts.... NO.... so what. In view of the price you pay for genuine parts, these are affordable and work great.Arrived in perfect condition, fit as they should, and upon inspection and "feel".... can see no real difference between the overpriced, genuine parts, or these.Can recommend and will but again if I ever need to replace.

Working as promised

This only goes in one way; and you have to take out the two front air tubes to install it.But it takes literally, just a couple minutes to change it out.This was a perfect fit, and does what it is supposed to do.I’d definitely buy it again; when it’s needed; which should be years from now.

This was purchased for our wood stove, which heats our home all winter. It is a very important part of the working mechanism of our stove. The fiber board is well made and also made in USA, which is a big plus! It has to withstand extreme heat, and I am sure it will. Now, we are ready for winter! Thanks!

I purchased the used wood stove in the title. The baffle board that came with the stove was cracked in multiple pieces and needed replaced. The quadra fire replacement was very expensive. I found this relatively inexpensive product by Lynn and decided to try it. It fit almost perfectly. I had to scrape a couple milimeter of board thickness off of one side to get it to fit perfectly. Stove is now in operation and working perfectly.

tiles are thinner than the original, seems much lighter, I doubt that these are going to hold up like oem, should have purchased the originals

Quick install in our quadrafire 3200. Before installation I used the baffle boards to trace a cardboard template. Then used the template to felt pen borders on a ceramic blanket, (Purchased at local hardware store) . I cut the blanket using good scissors. All done this way to avoid any handling risks of the fragile baffle boards. They were inserted on top of each other then one was slid over to cover completely. The pre-cut ceramic blanket was then easily tucked in without folds on top of the boards. If our chimney sweep destroys these next spring I would definitely go to Lynn Manufacturing for another replacement! It was a perfect fit!