🔥 Weld Your Way to Perfection!
The Forney 30805 7018 Welding Rod is a 5LB, 1/8-inch low hydrogen rod designed for all-position welding. It is ideal for general fabrication of cold roll steels and excels in challenging applications, providing a tensile strength of 70,000 PSI. This product is made in the USA and comes with a 90-day warranty against manufacturer defects.
| Manufacturer | Forney |
| Part Number | 30805 |
| Item Weight | 5.2 pounds |
| Product Dimensions | 14.63 x 3.5 x 7.5 inches |
| Country of Origin | USA |
| Item model number | 30805 |
| Is Discontinued By Manufacturer | No |
| Size | 1/8-Inch |
| Color | No Color |
| Finish | Grey |
| Material | Mild Steel |
| Thickness | 0.13 Inches |
| Amperage Capacity | 150 Amps |
| Installation Method | arc-welding |
| Item Package Quantity | 1 |
| Capacity Description | 70,000 Tensile strength |
| Measurement System | standard |
| Included Components | FORNEY INDUSTRIES INC 30805 5LB 1/8" 7018 Weld Rod |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | 90 day warranty against manufacturer defects |
R**T
Great Rods, burn like they should, great quality!
Great value, for a good quality Rod. I burn a lot of 7018- 1/8 rods, & these run as I would expect.
M**9
Work fine for me, beautiful welds!
These rods work fine for me. I set my little DC inverter welder to about 120A on some 3/16" wall pipe to test them out. They go down with just the right amount of penetration, the puddle is easy to control, and the slag peels right off. My welds look just like the pro welds you see in YouTube videos, and I'm a complete welding amateur.I did find them very difficult to restart UNTIL I discovered a trick on YouTube from a welding instructor: just briefly scrape them on a piece of sandpaper to rough up the end, and they start just as easily as new!Mine came well packaged in a plastic bin covered in more sealed plastic.
B**G
Hey, its welding rods
Not much to say, it is an expendable you need.
C**S
Average electrodes. They work just fine
So these electrodes are ok. Not the best I've used, but still not bad.They arced pretty easily, ran smooth, and left a good bead. Nothing to complain about really.The packaging is another story. 7018 rods need to be kept dry, and they arrived with the plastic film on the outside of the box wadded up at the bottom of the shipping box, and there was electrode dust all over the inside. There was also no moisture absorber. If that hadn't been the case, I would have given it five stars.
Y**D
Awsome products
I love it. They work amazing and my husband is teaching me to weld and I will definitely keep buying your stuff. Also comes with a great heavy duty Kawasaki green.
P**.
Gotta know how to use a stick welder
Can definitely tell the welders vs wannabs on this product. They work if you know how to work em if not stick to a trigger pull welder if you even know what that is. Definitely not the best rod but for the money shut and weld.
M**O
Muy bueno
Si es muy bueno
S**S
Better have a heated rod box!
The plastic was torn but the plastic box was unopened. It had been raining for a day or two but I tried to run one anyway. Had the machine cranked up past 150 just to get it to run and not stick. Finally landed on 165 to run it ..put rods in heater box and next day ran good at 155. Next day. 150 laid down , good penetration,. Restart on partial rods a hard drag flux capa.off electrode but it'll handle not so clean of surface well.. could've been 4 stars if the rods hadn't hit 75% on my moisture reader for concrete. Think the allowed moisture is far lower to meet spec better packaging would have solved it ..
G**Y
Forney 7018 Welding Rod
Welds well with easy startig.
V**E
The package was delivered with open box
The flux coating on the rod is damaged
C**A
Very good
Sometimes it melts too much and then you have to break the flux away to be able to weld.
C**L
Baguettes à souder
Mon conjoint est très satisfait et on vais commander à nouveau
J**N
Bon prix
Vas très bien pour souder!
Trustpilot
2 days ago
1 week ago
