gulrear Portable air Conditioner Window kit Universal Portable AC Window Vent kit with 4 Plates Seamless Slot Style Portable ac Window kit Adjustable Length from 20" to 62" Suit for 5.0" Exhaust Hose

works great for bigger rooms ! Cooling is good , very easy to install and use

Before you order this, MEASURE the width of your current hose (doesn't come with the kit) and the height of your window and make sure this is the kit for you. The one that came with my original air conditioner was too tall for my window and only using 2 panels let a lot of heat back into the room. I thought my actual air conditioner was the issue, but it was the window kit that was the problem. This kit came with weather stripping, to help block out any heat. This is my first portable air conditioner, so I wasn't aware of other things I could do to help with the heat issue escaping back in to the room. While researching a new air conditioner to replace my current one, I learned a lot from reading the reviews. One was using weather stripping to stop the leaks. I had been using duct tape to try and hold it in the window (the original window kit was very flimsy, so had to tape it to the window so it would stay in one spot.) The duct tape took the paint off of my actual window, so I don't advise using that. The next thing I found was to wrap the duct with a special tape that holds in heat, up to 212 degrees. After I wrapped the duct with that tape, I put a towel around the duct, right at the window. That absorbs any extra heat that gets through. This kit came with a small weather strip, to help close the gap from the middle panel of this kit. Honestly, I didn't even need to use it. This kit worked that well for me. However, I did use a small piece on the middle panel, just in case. This kit stays in my window perfectly, without the duct tape holding it up. I am beyond impressed with this kit. I wish I would've had it from day 1. I would buy this kit, again and again.

Good enough for windows, probably too flimsy when fully extended for a door. But for my sliding window worked fine.For those say it is too small - it’s fine for 13mm/5-inch hose. Some AC units are 5.9 inch. Just make sure which one you need.No instructions is frustrating but you can figure it out.Oddly, there is not a female and male adapter as described. — it’s all one unit that threads onto the hose on one side, and snaps into the window channel on the other. . Works fine but they should update the product description

I used this to thread my 2016 Mitsubishi i-MIEV electric vehicle charging cord through to an interior outlet. It reduces air transfer from outside. For extra insulation, I stuff some AmazonBasics microfiber cloths around and in any exposed areas where air is seeping in. I do not want any electrical issues. I just pull my car in extremely close to my home, thread in the cord through this vent kit, plug it in an interior outlet and I'm good. This product works extremely well for my needs. It was really easy to install. It secured in place nicely. I did not have any worry that it was going to break under pressure, have my window slam shut and subsequently a crunched cord. This is a good product. I highly recommend it.I was not compensated in any way for this review. I like to give open, honest and transparent feedback on products I like to try. I hope you found this review to be helpful. If so, please click the 'Helpful' button to let myself and others know that it has helped you.

If you sense a BUT coming on then you have a keen intuition. First some things to note this is the second Gulrear product I have purchased. I liked it so much that I bought the companion product for another area in my home. This is made out of the same sturdy and easy to assemble materials with one small difference. Well 2 of them actually. The screw fittings were not included when it was shipped. As luck would have it my previous purchase was shipped with 3. I am currently just setup to let the slider rest on the vent coupling to hold it in place. Hopefully someone will address the issue and send me the missing part(s). All of that said you can put this together in under 5 minutes or if you are in a hurry your kids can do it in 2.

I have an old school LG AC (model LP1015WNR) and this fit perfectly. The hose didn’t fit quite right into the hole but with tiny modifications it slid right in. It took me 5 minutes to install this thing thanks to the amazing video. Highly recommend!!!

Works really, really well! Took us about 5 minutes to figure out how to get it to work with our AC unit (Delonghi PACAN125HPEK), but once we realized we had to take off *all* the pieces on the end of our AC's tube, it fit perfectly and holds up well in the window.

The description of this item says it will expand to fit a 59" window opening. NOT TRUE. My window opening is 58 " and the insert was almost 3" to short. And, if it is expanded the full length, it is not sturdy and could be easily knocked out of the window. We cut a piece of wood and wedged it in the top to try and make it work. After a very short time the vent hose fell off of the hose attachment piece. We used packing tape and taped the hose to the plastic piece. Needless to say, the whole thing looks very ugly. The AC works great so we will now be making a piece to replace this mess. That being said, if you have a small opening, 45" or less, it will probably work pretty good. You will need a hose clamp to keep the venting tube attached to the plastic piece.