Weston Arrow Saw Replacement Blade (52-0402-W), Fits 52-0401, 52-0501, 52-0601-W,Black

Although it borders on flimsy at times, it is a very sturdy and reliable device for cutting arrows to size consistently. A little bit of prep is required for assembly, but once done one may consistently cut arrows to size, As a bonus it includes an easy to use arrow spinner setup. The dust collector is a must, it even works with the attachments from a basic household vacuum cleaner.

Used for years. Works great. Durable product.

This is a capable arrow saw that can save you money and help you dial in your arrows for the best flight possible for your bow's draw weight and your personal draw length. I've been saving money on arrows by buying bare shafts and installing the vanes, nocks, and inserts myself. Part of customizing your arrows, though, is getting them to the length you need to make sure they're long enough to clear your arrow rest by at least an inch but not so long that they are either too flexible or heavier than necessary for good, accurate flight. In the past I've ordered arrows cut to length, had a local shop cut them for me, or used a home-made saw jig using a Dremel tool. This Weston saw is a much better option for me. I like to start with my arrows longer than I think I'll need, and install the point inserts temporarily with hot melt glue. Once I've got my centershot tuning dialed in (using bareshaft tuning to get the rest/nock point elevation right, and French tuning to get the windage correct) I go back to the bareshaft tuning to compare the point of impact of bare shafts to fletched arrows. If the bare shafts hit the target to the right of the fletched shafts, I can heat the tips, pull the inserts, shorten the shafts, reinstall the inserts, and try again. Shortening arrows like this will reduce the flex of the arrows in flight, and move the bare-shaft arrows to the left. Once the bare shafts and fletched arrows are grouping together, I know that my broadheads will also fly true. Having this easy-to-use arrow saw at home makes this process as convenient as possible. I use 2 drywall screws to secure the saw base to my work bench. When I'm done cutting arrows the screws are easy to remove so I can store the saw and reclaim the work space. I just re-use the same screw holes when its time to get the saw out again. I highly recommend screwing it down if you can, but it isn't strictly necessary, as there are rubber feet on the bottom to keep it from sliding around. I have found the saw handy and a good investment. Let me know if you found my review helpful.

99% of bowshops have this saw! Works great with the ability to hook up a vacuum to it. Comes with a extra blade and wrenches. Could not be more happy!

Bang for the buck is high; good for cutting many arrows. If testing bare can fletched shafts, you may be better served with a mini bench top cut off miter saw (https://www.amazon.com/Hercules-Benchtop-Cut-Off-Miter-Crafts/dp/B077G8ZKX3/ref=asc_df_B077G8ZKX3/?tag=hyprod-20&linkCode=df0&hvadid=242132388719&hvpos=&hvnetw=g&hvrand=1726784784770032355&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007837&hvtargid=pla-571999342446&psc=1) equipped with a cut off wheel (https://www.amazon.com/gp/aw/d/B08Z4FVQNQ?ref=ppx_pt2_mob_b_prod_image) instead of a saw wheel. Easier, more precise cuts and portable.

Cuts through carbon like a hot knife through butter. The nock holder does walk a little when you tighten it, but not much of a problem. I didn't understand some peoples complaint about having to mount the measuring tape, or the fact that it had come loose. I had little or no issue mounting it, and if it decides to become delaminated, I'll put a piece or clear packing tape over it. For a home option for cutting arrows I think its great. I'm not cutting dozens on end of different lengths, much like a pro shop would. One other comment I found a little strange "Vibrates a lot, mount it to something solid" . I would not recommend mounting it to a TV tray but I didn't notice any undue vibration. Since I don't want to leave it setup all the time, I just used a couple of small C-clamps to mount it to my bench without any vibration issues.

Great for making your own custom arrow shafts. Easy to assemble and setup. Works smoothly and have made over 3 dozen arrows with it so far.

If you are really going for accuracy this wouldn’t be the set up for you. I bought this last year & I finally cracked it open which I probably should of done sooner because I probably would have returned it. At first look… it looked good. But after getting into it, the parts weren’t machined the greatest. The block where you put the arrow nock in is really janky & doesn’t seem to be machined the most accurate & just has a set screw to lock it in which moves the block & doesn't keep the block straight. More of a simple clamp lock would of made this way better. How you measure arrow length is from where the arrow nocks onto the string to where you want it in the arrow rest & the block was machined a 16th off as well. (may vary depending on the nock as well, I’m not a 100% on this) I ended up having to use vice grips to keep the block from moving so I can cut my arrows. I got the job done but I will have to make modifications to this if I want to keep using it. Also I followed the instructions to the T on how to put the tape on and it was way off and had to reduce it. Good thing I checked it. I would probably look into a better set up. I know these are pricy but better to spend the money once rather than twice. I would say if you go to a bow shop & they use this exact set up I probably would go somewhere else.

Another great and very much needed item to add to archery shop at home. The unit is built strong and solid with a very high RPM cutting arrows with ease. The saw disk is extremely sharp that gets the job done in perfection. The carbon dust using the collar is collected by any type of vaccuum with no spillage. EXCELLENT PRODUCT

Good saw simple to use

Works good, delivery was long as it had to clear customs.

This saw works great. The only issue I have is the length adjustment set screw is a corse thread but should be a fine thread. As you tighten the screw it moves the adjustment. Otherwise this saw is great and good value.

I was very excited about this saw . So I started cutting my arrows, first dozen no problem but in the middle of second dozen saw just stop working. I was really gentle when i cut arrows I didn’t press to hard ..... So this product need to do something with engine and I want my money back or new saw !