VideoSecu LCD LED Monitor TV Wall Mount for 19" 20" 22" 23" 24" 26" 27" 30" 31" Flat Panel Screen Maximum Loading 66lbs VESA 75/100 Ultra Thin Mount Bracket 1EA

Update: because of my setup I installed the mount side ways so the monitor slide in from the left to the right, because the mount has sorta a v shape going for it, took precise alignment to get it right but everything works and now I just slide my monitor to the left to remove it.Don’t mind dust in photo I’m doing constructionIn my case I didn’t have a stud to mount it too so I used a spare pice of wood affixed to the wall with toggle bolts and screwed the mount in. With the depth of the wood .75in the total space the monitor sticks out is 5in center and 9 inches on the extreme curve ends of the monitor (very small amount)Best flush mount on Amazon for a large 49inch monitor, very sturdy, best option for save space on a a narrow desk. Simple assembly didn’t even remove instructions from box.In my case my desk is 8ftlong by 19inches deep, with an 1800r curve msi oled 49 inch monitor, after trying other mounts this give me the most room and it’s far more sturdy. Honestly wouldn’t use a full motion for a 49 inch but if they could make one that overs small adjustments that would make installing even easier as if your not good at leveling you could fix it by twisting it level.

There is nothing fancy about this product, nor is it necessary. For the cost it does everything I was looking for in a simple wall mount for a 3rd PC monitor. Again, it doesn't have any additional features (e.g. tilt, pan, extension away from the wall, etc.), so know that going in. If those are features you aren't looking for then this little mount will serve you well without hurting your wallet.

I needed a mount for my computer monitor that would put it as close to the wall as possible and this mount was perfect. Sturdy, easy to install, and very low profile.

I decided to set up a secondary stand up workstation for my work from home needs. I decided to go for this low profile mount for a 27" external monitor since I don't need a swing out arm that extends away from the wall. The mount comes with a variety of screws to use with your monitor. Unfortunately, my monitor's VESA mounting holes were recessed so the included screws were too short. Luckily, I had some longer screws on hand and I was able to make the mount work. This is not really the mount's fault but it's worth noting that you might need longer screws. It's also worth mentioning that the instructions say that the mount MUST be installed into a wood wall stud or solid concrete wall.The mount comes in 2 pieces with one piece going on the monitor and the other going on the wall. After both installing both halves, you slide the monitor down onto the wall mounted piece. This was a little tricky but doable. After I initially slid the monitor down into the wall mount, I couldn't install the power cable and the hdmi cable since the space was too tight (about 1/2 an inch). I ended up removing the monitor, installing the cables, and sliding the monitor back down on the wall mount with the cables hanging down. If your monitor's connections stick out from the back, this mount might not work or you might need cables with 90 degree connections. Luckily, my monitor's connections are on the bottom so this mount works with standard cables.Overall, it might be a little tricky to install the mount depending on how your monitor is configured but the end result is nice and tight to the wall. Seems pretty stable too.

Solid, sturdy mount. Perfect for mounty my 27" Samsung smart monitor in my camp trailer. The wall and monitor side of the mount are secured together with screws after installation, keeping everything together during travel. Prefect! Came with all necessary hardware as well.

I had very little space for a mount and found this one. I had 1-1/2" of space when the door was closed on this Box. The Display I'm using is just under 1/2" thick. This mount is just under 1/2" thick. I need a little bit of room to be able to hit the buttons on the back of the display. You can see the small buttons in the second picture on the top of the display there, which is the left side when looking at it from the front. So I added some spacers behind the mount on the back of the cabinet. it also gave me a bit more room to kind of slip in sideways and down. Because I'm limited on how high I can go inside that box.Another thing this mount has going for it is that it's VESA 75x75 or 100x100, on both the mount going onto the TV and the back bracket. The other 2 I also got, it was either for the TV, but the back mount was something else. Which if you're just mounting onto whatever, may be OK. But this Box was set up with holes for VESA 75x75 or 100x100 also. That was what won this mount over the others I had.With limited room, this mount couldn't have gotten much thinner!!! It also included all the screws and stuff you should need the normally mount your screen. It's well made. Comes with all the hardware you need. The one problem I ran into, I have the display bracket mounted. It's 75x75. I mounted the back bracket also 75x75, and the bolts I guess were hitting over the screws on the display bracket and so I couldn't get it to go down into the mount all the way as they were hitting each other. I ended up grinding the bold heads down to half the thickness they were for the back bracket. Mounted it back, and the Monitor slid into place. More than strong enough still to hold that little display up.If you can, use the 75x75 mount on the display side, use the 100x100 on the wall mount side. Then there's no chance of the screw heads on the one side hitting the bolt heads on the other side. or Visa-Versa. I also didn't use the screws to hold the 2 pieces together to lock the display on the mount. Because it's just too hard in that box to get to the bottom, and it's not going anywhere in that box anyway!!!