Lithonia Lighting Adjustable Dusk Dawn Security Light, Twin Par Outdoor Flood Light Holder, Photocell Sensor, 120 Volts, Uses 2 Lamps Up to 150W (Not Included), White (OFTH 300PR 120 P WH M12)

Ok, I am an expert installing these things. Hurricane have destroyed about three in the past two years. I have this mounted on a tree for my backyard. Pros: This is cast aluminum and somewhat durable. It is a good price for the import quality. The sensor lasts a long time and is very sensitive. Tip: When you install to test the unit, have some one hit the breaker switch to turn back on, (Off always during install period). The lights will light up and then go out to show that the install was right. Use the wire nuts included and be safe on the ladder. Always easier with two people. I would definitely recommend this to a friend. Also if you put in bright flood lights like a 1000 lumen, flood leds are the best. Enjoy.

I like these as the fitting lasts for years, are easy to install and the color selection. Apart from being durable (metal, not plastic), they can fit most locations with ease and have a good appearance. Changing a bulb is far easier than replacing a fitting. I installed some Sunco 1050 lumens which give good lighting. This kit comes with everything; mounting screws, silicone gaskets to seal the bulbs, black weather gasket for the mounting plate, wire nuts etc. Adjusting is easy and everything swivels/locks in place easy. No issues. Highly recommended.

I used these to replace 2 units without photo sensors (guesstimated at about 10 years old). "Good" quality by today's standards (okay ... starting to sound like an old timer here, aren't I ...). Housing appears decent strength, finish is fine for distance from which it will be viewed. Not too bad to adjust the aim of bulbs - about like other similar lights of decent quality with which I've worked. Gasket is ... HA HA HA!!! ... basically flimsy and a complete joke. Machine bolts were too short for my application (junction box recessed 1/4 - 3/8" above down-facing plane of soffit, mounting flush to soffit) so I dug up some longer ones from my stash. Used my own wirenuts so I had correct size for # and gauge of wires given wiring configuration in my application (but to be honest, though small, at least the wirenuts that were included had metal threads in them).The 2 units I bought look good and function well, turning on and off appropriately, over 2 mo or so they've been up. I put exterior flourescent floods in them and they work as expected. I'm hoping for quite a few years of service and based on the "decent" build quality, while I may not get 20 years, I think they'll probably do okay. I don't like reviews "right out of the box," that don't put the product through its paces, but I don't figure a review years down the road will be helpful. These seem to NOT be your budget cheap-o junk stuff, but aren't really high end either. Seem to be good compromise for value. I'd say I'd buy it again but if I'm doing that soon, it's because they failed and then I'd probably not be as happy. So for now I'll say I recommend them for those looking for good value on basic dusk-to-dawn flood light :)====================\update - they are still going strong over a year later. Happy with product. As above, still think they are "good" quality, not top quality so I'll stick with 4 starts, but for price, over year without trouble, I would recommend them and would not hesitate to buy them again or recommend them. Just know you may need/want to use your own bolts, wirenuts, etc.

This is a decent outdoor light fixture. Works well. Metal construction. Like others have said, the gasket that comes with it is garbage though. too flimsy. Smashed in the box too. Make your own or do without.

Weather got into the sockets of my old non-motion detector white dual-bulb outdoor floodlight fixtures turned on with a manual switch in my house so they needed to be replaced. These are strong and well made from cast aluminum (no rust!) and white powder coating. Easy to install and used with a pair of 2500 lumen LED floodlight bulbs (not included) mounted to the side of my house. I also used the weather-proof gaskets mounted to the base of my LED floodlight bulbs to keep the weather out of these newly mounted fixtures. Very inexpensive as the last manufacturer of such non-motion-detector and non-integrate-LED twin socket outdoor fixtures. I have a total of three such twin fixtures mounted on my house so I replaced all three fixtures. I actually also bought a spare set of three fixtures that I put in storage for potential replacement use two decades in the future when the white powder coating may start to look less white after being exposed to the weather for 20 years :-) If you have a need for these fixtures, buy them now before they are totally gone forever and you are stuck with outdoor fixture that have integrated LED lights. For the latter, you'll end up having to replace the whole fixture when the LEDs eventually fail (got for the light fixture company and more expense for you) versus just replacing the LED floodlight bulbs when the bulbs eventually fail.

perfect fit, crisp color, easy to adjust by hand, and lightweight. lifespan and durability will tell over time.