Seal-Krete 604001 Clear-Seal Satin Concrete Protective Sealer, Gallon, Clear

This product is perfect for sealing one part epoxy concrete paint. I used this stuff over my painted walkways 4 years ago and the walkways are still like new. I just repainted my driveway after 4 years because it takes much more abuse. I then used this product to apply a clear coat (2 coats). For driveways it is best to use satin finish or gloss, not low gloss or matte. The low gloss versions result in ugly tire marks on the driveway. The higher the gloss, the less the tire marks (which wash off easily with Simple Green and a cheap soft bristle deck brush). One note of caution, higher gloss equates to a more slippery surface when wet, so extra caution is advised. Also, park the car on the street for an hour in the summer to let the tires cool down before rolling onto the driveway. This prevents hot tire pickup of the clear coating and underlying paint.

This seemed to cover well, it is a little more shiny than some stains but I like the look very much

Application was easy and it went as far as I needed. I would advise to stir. If you apply it to thick the color has a difficult time leaving. It wants to stay milky. After it dry's the milkiness goes away. I can't rate the durability until it's been down for a period of time.

Opened the product, it had coarse sand-like substance mixed in a watery solution. You’ll never be able to use it with paint brush or roller.To refund it the product should never be opened. You’ve to pay for shipping back, you’ve to pay for 25% restocking.I want to give them 0 star. Amezon doesn’t allow that so I’ve to unwantedly put 1 star review!

Applied easily. Goes on milky color but turns clear. We put it on an outside patio area. We put on two coats and the protection is great. Still have enough to do additional coat if we need to later.

This worked really well on our concrete patio. It’s been more than a month and still looks great

As other reviewers have stated, the finish is definitely a higher sheen than the satin name suggests. First coat, satin, yes, but once you add second coat, there is a higher gloss. We actually don’t mind the sheen because we used this in basement floor, and higher sheen will be easier to clean.Overall, we are pleased with how our floor came out (we used two coats of waterproofing paint, threw some of those decorative paint chips down, then two coats of this sealer).We ordered 4 gallons. One was damaged and leaking during delivery. Fortunately we caught it before it leaked through the box and onto our floor.Because of space constraints, we had to do our floor in two sections. We followed all the steps the same, including timing between coats. Unfortunately, we had used one gallon of this sealer on the first half we did and another gallon on the second. We noticed immediately that the second one was drying with a lighter tone. We hoped that once it had cured, it would be the same as the first half of the floor. No such luck. In the picture you can see where our first section ended and second started bc the second is lighter than the first.It’s just a basement floor and overall still looks good, but if you know or think you need more than one gallon and you can do your entire surface at same time, mix gallons together vs using all of one then starting the next.

This sealer works great!