amzdeal Bidet - Non Electric Dual Self Cleaning Nozzle (Frontal & Rear/Feminine Wash) Ultra Thin Bidet Attachment for Toilet Fresh Water Sprayer, Hot and Cold Water

Other reviewers have mentioned that the hot water doesn't get hot enough. That's a simple fix. The mix valve inside that controls the temperature of the water is too "open" if that makes sense. An easy fix is to lower the pressure of the cold water coming in from the toilet line. It won't affect you unless you care about how quickly the tank refills for another flush. Fixed the problem for me.Parts are higher quality than the more expensive competition. The one I was replacing was more expensive and came with an ugly plastic line for the hot water. This one came with the same braided water line.Tip for connecting under the sink. These connections are metal to metal. They do not require plumbers tape. You will end up with a leak. My faucet line was older and had rotted, so I took the opportunity to replace it as well. Only 4 dollars at Home Depot.The nozzles are better on this one. The stream is larger (more holes and larger) and aerated so you can use a much higher pressure than you're accustomed to.Every last thing about this model is 5 stars. Great value- great performance. If it was twice the price I'd pay it

Ohhhhh man! It's like that first minibike or gocart that you get! It's a little scary at first, and you make some errors..but then, you learn how to work the throttle. Then you find and remember where the power-band is! And then it; brrrrrrrapbrrrrrrrrap....zoomzoom!!!And oh, snap!! You'd be surprised at how accurate these things are! **Don't test drive one, without🍑a target in place or it's like a supersoaker, against your wall. ALSO, you gotta turn it on low and let it run (trickle)for a minute, to allow the warm water to reach the nozzle. But after that, BAMMM!(que Sailing by Christopher Cross)⛵️Notes:-Use teflon tape on all male threads.-My cold and hot water line & connectors were the same size, so I had to run to lowes and get an extra 3/8 T fitting ($5).-Dial the warm water in before use (I used a cup to catch the stream)-Other than that; so far, this item is better than advertised! That's the end of TP for me! Happy hunting!!

The "easy to install" is a mixed thing. Once I figured it out it was easy to install - or so I thought. The morning after installation, I found 1/2 inch of water in the basement and needed to call an emergency plumber who had to reinstall the coupling part. Not clear instructions on this. Also, the instructions tell you to attach the seat first and then deal with the hoses. Why? So the 5 inch wide control panel can be in your face while you're on your hands and knees on the floor? Bass ackwards! Worked much better the other way round. Also. the hot water in the spray never gets hot - just warm. But maybe that's not a huge deal because who wants burning hot water in your netherlands!So all in all, for $350 including installation, you might do better if you just go through a plumbing company or contractor.

The positive is this bidet is the closest I’ve seen that has the same sleek looks as the Tushy Bidet for $119. Amzdeal is $55.The negative is I don’t like that the water radio between hot and cold is a lot to be desired. The hot water is not hot enough to my satisfaction. I installed on May 24 2020 and it’s not a winter day. I imagine that using it during the winter you would not be able to feel the hot water.I went to Home Depot bought a 3/8 Brass Craft 1/4 turn valve attached to the cold water line, now I can control my desired amount of cold water. “Bingo”. The valve cost $10.23. My total investment $65.23 and I am extremely happy and excited. It works Awesome. I have attached picture to show you how it came out and the box that valve came in.Another huge bonus is that the Amzdeal comes with 2 stainless stainless hose with an extended stainless steel hose for the hot water. Most others are shipped with plastic tubing.

This has been a great bidet to have. It was super easy to install and works really well. I like how the design has levers instead of knobs like most other bidets I have seen. It is easy to operate. The bidet base is pretty thin so I don't have to worry about getting spacers for my toilet seat.

I really want to like this bidet, we ordered it because the one we had purchased previously was on back order. This one has the side controls rather than the top controls (so bumping it with your thigh doesn't give you a cold surprise.) Unfortunately I cannot get the nozzles to spray the correct area no matter how much I adjust the bidet on the toilet. With the bidet mounted as far forward as possible, it still sprays too far back. Even the feminine nozzle sprays too far back. I suspect we are going to have to return this. I do like the side controls though!

Wow, works as advertised. Easy install with good angle valves. Toilet seat spacers required. As a plumber, always use Teflon tape on all metal to metal threads (wrap threads with two layers). DO NOT use Teflon tape on plastic threads on the water controller. If u insist on using tape on the plastic threads, only wrap the threads once. Again, do not wrap the controller plastic threads.