Heavy Duty Front Rear Flat Textured Steel Fender Flare kit Off Road Mud Guards Black Set of 4 Replacement for Jeep Wrangler 2007-2018 JK & JKU Unlimited (2/4 Doors)

Installing on my 2013 JKU Sahara, with 2.5" lift and 285/70R17 BFG KO2 tires.Pros: fenders look great, quality seems to be comparative to other well known brands that I've seen. Gotten lots of compliments.Cons: the Rivet nuts that come with the fenders say they 1/4-20. They aren't, they are actually a metric size.So, you will need to purchase a rivet nut tool (similar to a rivet gun, but not the same tool) to install these. I purchased the tool from Harbor Freight for $19 and it came with a 1/4-20 attachment, but wouldn't fit the rivet nuts that came with the fenders. Ended up ordering actual 1/4-20rivet nuts from Amazon because no local hardware store had them. I then bought a pack of bolts to fit. It was cheaper than buying a new rivet nut tool to fit the hardware that came with the fenders. All in all, I'm happy with the fenders, just wish I'd know to buy either new rivet nuts or a rivet nut gun with metric attachments.

I had these fenders installed 2 weeks ago. I was in the hospital due to breast cancer and have not driven my Jeep except from my friend's house to to my house after he installed the fenders. Within one week of my Jeep sitting in the driveway the fenders rusted and started falling apart I emailed the company and the guy offered me back a $5 discount on eyebrows on eyebrows yes you heard that right eyebrows... My Jeep is known as the breast cancer Warrior Jeep I am in shows and breast cancer awareness fundraiser events I cannot have these fenders shown on my Jeep... I sent them back and not only that but had to pay $45 shipping so I really lost out never again I have friends of mine and the Jeep club also that have these fenders and they had to sand them down and repain them because they immediately started rusting.

I absolutely love these fender flares. They were easy to install. I think taking off the original jeep fenders was a harder task than putting these on. They look great and everyone asks me where I got them. I have had them on for about a year now and they fit perfectly. They wear great and have had to do nothing to them at all. Just know if you are installing them that you should put a large washer behind the fender where you put the nut on. It will help because the nut won't go into the bolt holes and if you need to take them off you can reach the nut easily. Highly, Highly recommend. Your jeep will thank you.

So first off, these fenders are good and sturdy..I like them and the textured look. Once they are on, they fit well, and look clean..My issues come with the Hardware. First most reviews said get a Rahm gun or rivet gun....Both tools I could not find at any store, you need a threaded rivet gun i guess, with the threaded end...I ended up just using the little tool..2nd issue, the rivnuts and the screws that insert did not fit each other. They felt like they mixed standard and metric together, I felt as I was Cross threading all of them, and some I could not even fit, especially in the back...so on each of the rear fenders, I have 2- 3 holes not screwed in, but still firm..for the front fenders, I by passed the rivnuts and just used 5/16 3/4 inch screws..those attached much faster and easier...If the hardware was better fitted, I would rate better.....over all not a bad buy and you could work with the hardware issue...

I got these for my 2008 JK. I had them in storage for a couple month before I was able to install them and came across a surprise. The company accidentally boxed 3 front flares and only 1 rear. I installed the front and contacted customer service. Without hesitation they shipped off a new set for me. The companies customer service is amazing. The installation is easy once you figure out how to get the threaded riv nuts in. No cutting or drilling needed. I love the look they gave my Jeep and I’m very pleased with the quality. For someone on a budget looking to add a more aggressive look to their Jeep, I would highly recommend these.

Another update!! All of the fenders are now completely rusted. Looks awful. So disappointed. Do NOT buy these fenders unless you want to replace them every 2 months.UPDATE*** fenders are rusted and the black is chipping off. VERY disappointed all around on this product. Wish i could get a refund!All the paperwork and instructions said the hardware was 1/4 20 so I purchased all the tools needed to find out the nutserts are actually metric and all that money I spent to install the fenders was a waste. Had to go out and purchase all new hardware to instal since I didn’t want to spend another $70 on new tools. Looks good after install but what a waste of money. Should have went with a better fender for the price since I end up spending over $200 after it was all said and done.

recieved these the other day but have not installed. Parts were packaged very well and they were secure. Upon opening noticed there are no instructions for the install (Took a star away for thatand hoping there is a video on youtube). I did my reseacrh prior to buying this a noticed a lot of people mentioning needing a rivnut gun. I had to dig a little to find the right one but i did. and the plus with that is other parts i'm installing need rivnuts so its a win win in a sense. I will update later when i get these installed. But i would recommend getting the rivnut gun if you order these. Also if would be cool if they included directions for the install.Update:After awhile of having these installed and normal driving the paint has been peeling on these. I looked back at reviews and saw a few others with this problem. The over all look and build is good for the price but the paint will peel, bubble, and chip. I would recommend looking for a different fender if you want them to last longer. I might pull them, sand the paint off, and repaint them.