Audio2000'S ADC203M-P XLR Male to XLR Female Balanced Audio Patch Cable- 1", Tip to Tip

This XLR cable is the perfect length for connecting my  Rode NTG3 Super-Cardioid Condenser Microphone, Black  to my https://www.amazon.com/Canon-Cinema-Camera-International-Version/dp/B00REWSZTA/ref=sr_1_2?s=electronics&ie=UTF8&qid=1481317507&sr=1-2&keywords=c100 handle. The female XLR goes into the NTG3 while the male XLR goes into the handle, the length of this cable allows me to connect to both Channel 1 & 2. The sound quality from the recording is perfect, I have no complaints about this cable.

This cable damaged the connector of my Behringer UMC-22 Pre-Amp.   I have thrown the cable away. I was able to disassemble the Behringer Pre-Amp to see what was wrong. The pins in this cable pushed the connector sliders into the connector and jammed them so they would not connect to any cable after I used this cable.Because Behringer uses a Hybrid connector, the three XLR pins connect to three slider rails. I had a very small flat-head screwdriver. I was able to dislodge the sliders and the Pre-Amp is operational again. So if you want to save yourself, avoid this cable at all costs!

For the price, these cables fit my needs perfectly. I use them to connect a desktop DAC to my headphone amp. ADI-2 DAC --> Schiit Jotunheim. Works like a charm.

Using this for an AT875R and it works very well. Clean, clear sound. The cable itself appears to be very well made.

It's a great cable. It's just kinda short is all.. I didn't realize 1' meant from tip to tip and not 1' cable between the connectors. I should have ordered a longer one. From the top of my camera mic mount to my xlr input is really tight. If I try with DSLR and shockmount to preamp under camera you would need about 2' to make it reach.

Just what I wanted. A simple run and gun single user on the street news type interview setup.Works great!

I got these to connect an EQ to a compressor without too much wire hanging around everywhere, and they did that job perfectly. Just long enough to make one thing connect to another. Don't seem to introduce any noise, lock really securely, and should provide a lifetime of service.

when using the camera mount for external shotgun mic w/ a foam windscreen this cable is the correct length for either channel 1 or 2 inputs (not for channels 3 or 4)

Tickamusic.I love these path cables. Short, and they fit perfectly in every way. I'm changing out all my colorful 1 foot 1/4 inch TRS ass all equipments use both 1/4 and XLR. I love the metal tips, I have XLR I bought at the music store and they're not that strong because they shake in whatever you plug them in. These one fit just tight enough. I need two more in 2 feet from the crossover to the bass amp.The price is priceless.Love it. Get yourself some of these cables. They came a day early too!

Well made XLR male to female 1ft cable, the perfect size for my boom mic mounted on my DSLRs from the audio amp to mini plug converter. Solid steel construction, heavy signal bleed protection in the cable, which is important when the cable is close to several electrical devices such as my camera and the XLR to mini phantom powered amp. Great length for cable enough to allow moment of boom mic on a DSLRs rig set up, but not so long as to leave cable interfering with rig setup. Also it isn't easy to find an XLR cable in one foot lengths. Good purchase for us DSLRs videographers.

wish it was an inch or so longer, but who doesn't?

good enough -- connectors look good. length is good. nice to patch short distances XLR. (like sound board to an external sound audio interface). "add on" amazon price is nice deal here!

I now have 3 of these small guys! (Use them for lighting fixtures). Work as advertised. Build seems ok, ends maybe a little weaker than others (although haven't failed yet)