Cup Turner for Crafts Tumbler Cuptisserie Tumbler Turner Machine with Silent Rotisserie Motor,Cup Spinner for Glitter Epoxy Crafts Tumblers

Great value for your money! Very quite motor and so far seems sturdy! I have a good bit of knowledge as to the parts and how it goes together...but for someone who does not...it might be a little confusing. It does show pics of how to assemble so that helps! I would definitely recommend this product. Great for someone just getting startedUPDATE:...BE SURE TO HAVE THE TURNER ROD GOING CLOCKWISE!! OTHERWISE IT WILL UNTWIST AND STOP TURNING!! AND ALSO THE ROD IS TO LONG!! AFTER I WENT TO CHECK ON MY TUMBLER, I FOUND IT LYING ON THE FLOOR AND ALL THE EPOXY RAN OFF OF IT ONTO THE FLOOR AS WELL!! LUCKLY IT WAS NOT ON CARPET!! I CUT THE ROD SHORTER AND USED FOAM ROLL THAT YOU ROLL AROUND THE ROD INSTEAD OF THE "POOL NOODLE" IT'S STILL A GREAT VALUE..BUT ONCE I FIGURED THAT OUT I THOUGHT IT COULD HELP SOMEONE ELSE OUT SO THE DIDN'T GO THRU WHAT I DID!!2ED UPDATE: This is the best turner I have ever purchased! Still very quite...It's now April of 2021 and this turner is still going strong and runs 24/7 when in use and that is at least 3 to 4 times a week! I'm fixing to purchase a 2ed one.

The media could not be loaded.  The product exceeded my expectations. It is quiet and does its job well (at the fraction of the price the retail store down the road wanted for a spinner). This is my first time making a resin glitter tumbler. The components to making a tumbler aren't cheap, and since it was my first one I was wary to invest in something that might aggregate me more than help me in the process. My boyfriend was able to assemble everything in 5-10 minutes. All the hardware was present, all the pieces were unbroken, and once assembled, everything was level and ready to go. This is what I wanted! To be able to get going and NOT have to worry if the turner was going to do the job or not.Make sure the styrofoam part your cup is on is flush with the PVC pipe. If it isn't there is a chance for the cup to fall off. I used Walmart's Ozark Trail 30 ounce double wall stainless steel, and it fit great. I am pleased because I was initially skeptical and was wondering why it was so inexpensive compared to the ones sold at the craft shop. Thank you!

I purchased this tumbler turner because it had decent reviews and it was a good price. Sadly, I was disappointed.I bought it in June. I put a blank cup on it to test it out for 10-15 minutes. Everything worked well. I continued to epoxy a cup and let it turn. During the process, the cup fell off and was ruined. I put the turner aside, thinking I would fix it later. I’m a little busier than usual and I decided to give it another try. I epoxied the arm to the pvc piece and it worked - until this morning when I checked on it. The screw on the inside had come out because of it spinning for awhile and there’s no way for me to fix it now. It’s partially my fault and the construction just wasn’t making it work.In all, I wouldn’t recommend this turner. Assembly was easy and it was super quiet. I loved that. However, I believe that the construction makes it or breaks it because I just needed it to work, regardless of anything else. It just wasn’t stable enough to hold the tumbler. Super disappointing.

I really like this turner and the fact that it can switch the turning directions. The only issue I had and fixed was when i has a cup on and it was turning clock wise the screw would back out and the cup would stop turning! Not ideal when you have a cup turning with fresh epoxy on it and you have to take the turner apart into order to screw the screw back in and it all back together before you can put the cup back on(you need more then 2 hands for this). But Know that I have it fixed it works great.

I have two others of these spinners and absolutely love them! Unfortunately these two that I bought both of them I was able to assemble very easily and they look as though they would spin just fine but for some reason the sticks keep popping off. I’ve pushed them on tightly and within a minute or so they keep popping off causing my cups to fall. My cups are not heavy I’m using a basic 20 ounce skinny. Unfortunately I’m not able to use the spinners now and it’s too late for a refund...

I bought a complete tumbler turning kit and this as an extra turner. First of all you can throw the "foam" that comes with it away. It has no traction being plastic rather than foam. Although the cup will fit onto it and feel sturdy, it will fall off in a matter of minutes. I speak from experience. I also have problems with the pvc rotating arm coming out of the fitting that attached it to the motor. Just when I thought I had this fixed, the screw holding the fitting on came loose so the motor was spinning but not the tumbler. The other turner I purchased was far superior to this one. This is a good price but you will need to be attentive and perhaps do some engineering to replace the foam and ensure the arm mechanism is properly attached with a washer or glue or all of the above. I'm not quite sure yet as I have set it aside mid project and will have to fool with it later. Oh, yeah, this also turns very slowly compared to the other. Some jay like that when trying to work. It's like 1 rotation per 20 seconds.

This cup turner was easy to build, took all of 5 minutes. I like that the motor is all wired and ready for use. The cord is long which helps placing it anywhere.The spinner turned on and runs smoothly as soon as its turned on. There is no noise which is a huge plus.The only downfall of this unit is when having a cup on the spinner and putting epoxy on with too much pressure can tip the unit.But with a cup on it spinning causes no problem. The unit is sturdy and does not rip over, I have only used 20oz tumblers unit so far.Overall, so happy with this spinner!