InSinkErator Stainless Steel Tank, H150SN-SS HOT150 Instant Hot Water Dispenser, Satin Nickel, 115 V, 12 Quarts

The media could not be loaded. I love, love, love! Pressure is good, I love that the handle you have to push it back instead forward I think that's great for safety reasons. It comes out hot! You can adjust the temp. I don't have it all the way I don't think it's needed as it comes nearly like boiling water. Super convenient. I've received lots of compliments. I got the brushed nickel to match my kitchen faucet. Performs well, no noise at all, buttons are simple. It's my first instant hot faucet and I would highly recommend to those who are thinking about purchasing one. My plumber installed it so I can't give no pointers there. But I love it, it's perfect!

If you are comfortable putting a new faucet onto a sink then this should be no trouble for you. A pro plumber should have no trouble at all. All you need is a spare hole in the counter where you want the hot tap to go, and a 115v socket under the sink where you want the main unit to go. Keep in mind that the socket will need to be hot at all times to keep the water in the tank hot. My socket was switched so that it controlls the garbage disposal. I was replacing my disposal at the same time, so I added an insinkerator countertop switch (requires another spare countertop hole). Now I just leave the wall switch on, which keeps the HOT150 powered, and use the counter switch to turn the disposal on & off. If i want the hot water off like if I'm off on vacation, I can just flip the wall switch. If you don't have a countertop hole for this, you might need to rewire your under-sink socket so it has a switched socket, and an always-hot socket.The water lines provided are somewhat short, so I got a 18in piece of braided stainless hose and adapted it to the lines from the unit. The unit uses a 1/4" copper tube as its main feed line, so you will need to purchase a T-fitting to add a new outlet on your sink's supply to feed the unit, and a compression fitting for the copper line, plus whatever other tubes and adapters. In my setup I have a standard sink tee->braided hose->stepdown adapter->compression fitting. you may wind up with something a little different depending on if you need the extra hose and what fittings your store carries.once you have all the connection bits its really plug and play: drop the faucet in from the top, screw the unit to the wall, plug in the lines from the faucet to the unit, connect the copper feed to the sink supply. Then you flush the unit for a couple of min and plug it in. Job done.In operation its pretty simple. I didn't flush as carefully as the instructions say and I did get some gurgling noise when its heating for the first day or two. I also found that when turned all the way up it actually boils the water inside. Possibly due to some air pockets, but I'd leave it set at 75% or lower to start, as it can definitely heat up above 212deg in some cases. safer to start on the cool side and bump it up till you get the temp you want. After I got the temp dialed in and the air flushed out its been quiet and excellent. I live a lone so I'm making single drinks at a time - I don't know if larger families might find the reservoir too small.Overall if basic plumbing (and possibly a little electric work) don't bother you this should be easy to install and seems to be a nice unit.

Good quality and very functional...glad I purchased the lever action rather than the push button...like the way that the lever springs back (safety). My plumber installed it when he was doing something else for me, -so I don't know how it would gone for me...was easy for him. This item has turned out to be even more useful for our daily routine than I initially anticipated.Good purchase.

Heats water to 180 degrees which is just right for beverages. Faucet is easy to operate and looks fabulous. Very easy to install, it took me less than an hour to remove the old unit and replace it with the new unit. Insinkerator is at the top of the game of instant hot water dispensers. I love it.

The faucet's spout is really short like 4 inches. There is maybe 3 inches between the end of the spout and the edge of the sink. I replaced my old unit KitchenAid brand (Made by InSinkErator for KitchenAid) it died several years ago. This unit is lighter and not as bulky, which made the installation a little easier for a novice like me. We use it all the time; the only suggestion I would make is that InSinkErator should put red on the faucet handle so guests know it's hot water. I have had several guests who did not know it's super hot instant water. Overall love it, just they went cheap on the size of the faucet.