VIVO Quad Monitor 17 to 32 inch LED LCD Clamp-on Desk Mount, Heavy Duty Articulating Computer Stand, Holds 4 Screens, Max VESA 100x100, Fully Adjustable for Home Office Workstation, STAND-V104Y

i needed more monitor real estate since most of us been working from home . i use all 4 monitors when i'm working but i have the 4th one dedicated to monitoring my 14 security camera's at home. its perfect and relatively cheap solution. it has max height of 31 inches which is the highest i've seen for any 4 monitor desk mount at 31.7 inches. i couldn't find any higher than that for a 4 monitor mount. luckily i didn't even need it that high. the top monitors are mounted and i still have like 4 inches to mount those top two monitors even higher.feels really good quality, good construction, has velcro cable ties for cable management. easy to install c clamp. as for mounting the monitors you can get the base all setup put the screws onto the monitor and then you mount the monitor to the desk mount. super easy. it says it can handle 32 inchs but i dont have that large of a monitor. i have 27 inch, 24 inch, 22 inch, 20 inch monitors mounted.the only issue i have is you cant lower just one arm. one arm is joined with the opposite side so if you need to lower one arm it lowers the other side as well. that's the only thing i didn't like but i dont blame it on the product i blame it on myself as i didn't notice that they acted in unison rather than independently. so for the top or bottom monitors if you need to adjust the height you would adjust it for both bottom monitors or both top monitors you couldn't adjust the height on just one monitor. it does look uneven for my setup because i have different size monitors. at first i was really hating it but i got use it it quick and for the price. i decided to live with it.

4 x 32" monitors all up and running. Very nice setup with a bit of room for adjustment. A word of advice, look at the distance from the center of your monitor vesa mount to the side and bottom edges of the monitor case. The specs state the max length of the arms and the height of the riser pole so you can compare if it will work before you buy. If it's too close or over that you probably won't be happy. You probably won't want it to be right on your desk or you'll be looking down at your screens. Also you'll probably want enough room at the top so you can tilt the high monitors down. Just some considerations.Very sturdy construction.

This works really well and does fit 32" Monitors however they are a tight fit in the vertical alignment. I am using Sceptre Monitors so that might make a difference.

Very sturdy. Easy to assemble. Only issue is the horizontal positioning once monitors are attached is difficult.

So I was super psyched to get this product after a lot of research and looking for just the right fit I think it's one of the only couple ones that are able to accommodate up to 32 inch screen TVs or monitors. However I do have a couple issues, because the plates that they came with will only fit up to a 100mm x 100mm Mount pattern on back of the tv.. I quickly learned I was screwed when I noticed all the patterns on mine were much bigger (200x100.) since the product didn't come with extenders or an adapter, and I couldn't easily or cheaply find elsewhere, I was almost going to return it. However, I did find a low cost on sale at a local store, whole mount that had a big enough plate. I bought four of them and took just the plates off each one and sorta jerry rugged adapters out of them. Ended up costing me another $100, and a whole lot of time to carefully install, as it was tricky af finding a way to secure those plates on good enough. The end result wasn't half bad though. Mind the screw patterns though before you buy!

It took about an hour but only because I had to take my monitors off a 2 stand model first. Straight forward assembly. The stand is amazing in its sturdiness; able to hold the monitors as I assembled them with confidence. I had 27 inch models of three different models, but the range of motion allowed plenty of give and take to arrange in a myriad of ways. All in all great value.

I have had this quad mount for about 18 months. I have two 32 curved Samsung monitors on top and two 27 inch HP monitors on the bottom. I use it of my personal and my work machines with a kvm to switch the monitor and mouse between them. Darn good product. I had the dual mount for a couple years and needed to upgrade (lost some desk space). Having the 32s on the top made me have to be extra careful when I mounted and made sure that it does not lean forward.

Holds the monitors nice and steady. Easy to set up. Quality materials.