✨ Glide into Efficiency with Aerol! ✨
Aerol Dry Film Lubricant Spray with PTFE (Teflon) is a versatile, non-toxic lubricant designed for a wide range of applications, particularly in food processing. With a serviceable temperature range from -200 to 250 °C and a convenient aerosol application, it provides a dry film that reduces friction and wear while being safe for incidental food contact. Ideal for both metallic and non-metallic substrates, this lubricant is CFC and chlorinated solvent-free, making it an eco-friendly choice for your lubrication needs.
| Material | Plastic |
| Brand | AEROL |
| Package Information | Tin |
| Liquid Volume | 466 Millilitres |
| Item Weight | 300 Grams |
| Recommended Uses For Product | Water |
| Specific Uses For Product | Lubrication |
| Item Form | Spray |
| Manufacturer | Aerol Formulations Private Limited, Aerol Formulations Private Limited, H-39 Bali Nagar New Delhi-15 +919810072294 | [email protected] |
| Net Quantity | 300 gram |
| Manufacturer | Aerol Formulations Private Limited |
| Country of Origin | India |
| Item Weight | 300 g |
| Package Dimensions | 24.7 x 7.8 x 7.4 cm; 300 g |
| Item part number | FM7701 |
T**E
Worked very well on my Godrej Tribolt
Over the past month, the "dimple" key was starting to get stuck while putting it into the key-hole and also when removing it. Since it is not recommended to use machine oil/WD 40 in locks... as they collect dust, I decided to order this.This does not come with an extension straw that can be used to spray into the keyhole... so sprayed it liberally on the key, inserted the key in the lock and shook it around to coat the internal pins of the lock. Repeated 2-3 times.Problem solved in 1 minute.The spray does not leave a thick white teflon coat on the key. The liquid that comes out of the spray looks clear and transparent. After it dries, there is nothing visible on the key. But it gets the job done... the key started going in without effort.
T**T
More propellant? No Extension Tube !!
Used for my car door locks (from outside, as well as behind the door panel). I do wonder about the amount of product in the can, vis-a-vis the amount of propellant.Did NOT come with any Extension Tube, or even a spray head that could accommodate one. The spray head appeared to be a regular spray head. I used an extension tube from an insect killer spray!!!:D(Dear Seller, please send me the Extension Tube and compatible spray head, for this product. Thanks.)
V**Y
Bad product
Waste of money
R**O
Very good product
Very good spray to lubricate surfaces and also protect surfaces from getting rust, like outdoor unit of A/cdoor handles etc.
R**R
Review for Resin Printer
If you are looking a PTFE lube for FEP then this is best just a bit overpricedMy Recommendation>Spray from at least 20 CM away so it creates a uniform layer of PTFE>You will see a white layer once it's dries don't worry that won't affect your print quality too much (I run few test prints everything seems great)>Once you have sprayed don't rub it with cloth or tissue>As it creates a layer of fine powder rubbing won't help much it will clean the FEP instead
R**L
DON'T USE ON FEP SHEETS (RESIN PRINTERS)!!
Couldn't find the "3-in-one PTFE Lubricant" in India so tried this spray instead.1. Creates a white powdery coating on the FEP sheet which has to be cleaned before pouring in the resin.2. Doesn't work as expected, prints are still sticking to the FEP sheet.
R**A
Useless Product,
Concentration of PTFE is very low so no uniform film is formed only some white stains
A**R
No active ptfe
Actually it's just an aerosol spray like brake cleaner ..its has no lubricating material called PTFE in it.pls don't buy..and hope Amazon will take it back and refund my money
Trustpilot
1 week ago
3 days ago
