Amico 12 Pack 6 Inch 5CCT Ultra-Thin LED Recessed Ceiling Light with Junction Box, 1050LM Brightness, Dimmable Canless Wafer Downlight, 12W, ETL&FCC

I bought these because they were about half the price of the home depot options and I wasn't sure if I liked how flush mounts look. I am completely blown away, these were a fantastic purchase and have completely transformed the rooms I put them in.Two-part design is thoughtful and makes installation super easy. Push connectors were included, and only takes about 5 minutes to wire each one including installing NM clamps on the knockouts. Sometimes on lower cost LEDs like this, the warm colors look unpleasant or don't match - not so here. All of the color options had great tone, selection was easy, and the dimming works down to the lowest ranges, no flickering or other issues.Big fan, I'll be buying again.

We’re in the process of remodeling our mobile home. These lights were the PERFECT addition to our home that we were searching for. They come with 4 or 5 settings you can choose from. You can determine how bright you want your space. We chose to set our lights at 4500k and WOW! It lit up our space beautifully! These lights were super easy to install. 3-5 minutes per light. We were done in no time! So easy & functional! HIGHLY RECOMMENDED! You won’t be disappointed!!!!

I bought 12 of the 8" lights for my 16' x 24' workshop. They give off the perfect amount of light. Nice and bright over the entire workshop. The aspect I like the most is the fact they fit over ceiling joists easily as long as your ceiling has at least 1/2" drywall. In fact, I have a ceiling joist dead center in the hole of each light where I fastened the junction box which is included with the lights. They have 5 different settings for the color of light and they are dimmable. They're easy to install and easy to remove with the 2 springs that hold them in place. I only installed them 1 week ago, so I can't speak to the longevity of the light.

The media could not be loaded. I love, love, love these wafer lights! They're easy to install and access if you ever want to change the Kelvin setting. If one goes out, just plug in a new one and you're back in business. I've installed 31 of these in my house and they work like a charm. Love the non-flicker dimming capability and we're saving money with all LEDs. One thing to note, the outer ring is a little smaller on the newer model and there is very little margin for error in your circle cut. I recommend reducing the circle by 1/8" from the hole template that comes with the lights.

***Update***Within hours of writing my review I was contacted by the company to address the problem. I'm satisfied with the resolution and do feel that the seller stands behind their product. I would order from them again in the future.***Original Review***I've installed around 10 of these lights over the past year.Recently, one started blinking, and then stopped working altogether.Thinking it was the light, I tried to switch it out with one I hadn't installed yet, but that didn't work and so I figured it had to be the junction box.After switching out the junction box (with one from the same set that I hadn't yet installed), the light worked fine.I opened the nonfunctioning junction box to see what had been going on, and it appears there'd been a short and that it had burned the board.I don't know whether this could have caused a fire - perhaps the company uses fire resistant materials and this actually worked as intended. I probably won't uninstall any of the others that I've already installed unless this happens again - but I don't know that I'd install any more in new locations.So in sum - the seem well constructed, are easy to install, and look great, but there's a potential risk for a short on the board.

As part of remodeling our kitchen, we decided to address some less than stellar lighting in our hallway and entryway. Both of those were lit with sconce lights that, despite installing the brightest candelabra based LED I could find, they always felt like a cave. The other challenge in our situation is that the ceiling was dropped in those areas for the HVAC duct work, and I did not have a lot of room between the ceiling and the bottom of the duct. These lights are so thin that it wasn’t a problem. Installation of the actual lights was a breeze. As others have said, be sure to get some 1/2” non-metallic push in connectors to protect the wire from the sharp edge of the knockout holes on the junction boxes. The clips hold the lights firmly in place, and they look great. I had to drill extra access holes in my ceiling to reroute the wiring from the sconce lights on the walls into the ceiling and around the duct work, but it was totally worth the effort!I spaced the lights about 6 feet apart in our hallway and a little closer in the entryway, and before I installed the dimmer switches the area looked like a hospital operating room - it was SOOOO bright! WOW, what a difference. Even though the seller recommends not using a smart dimmer, I used the Kasa brand smart 3-way dimmer sold here on Amazon, and they work perfectly via the SmartLife app as well as the integration with Alexa for easy voice control.I am now planning to replace all the traditional canned lights throughout my house with these, as well as putting them outside when we put in an outdoor living room.