OVERTURE TPU Filament 1.75mm Flexible Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Fit Most FDM Printer (TPU Space Gray)

OVERTURE is my go-to filament, and this TPU is no exception. I used it on my Bambu A1, and it printed exactly as expected. The filament is consistently sized, feeds smoothly, and produces clean, flexible parts without any tuning headaches. I’ve had no clogs, no inconsistent layers, and no surprises mid-print. The 95A softness strikes a good balance between flexibility and strength, making it easy to work with while still holding up in practical use. For the price, the quality is hard to beat. If you’re looking for dependable TPU that just works, this is an easy recommendation.

This TPU filament is fantastic! The flexibility is perfect for phone cases, toys, and other soft prints, and it feeds smoothly on my FDM printer with no clogging. The black color is rich and consistent, and the 1kg spool lasts a long time. Highly recommend for anyone needing reliable, high-quality flexible filament.

This prints very different from PLA and you're going to need to dial in your settings so be prepared to waste some material. Mostly, crank up your nozzle temp and slow print speed down. Once I got my settings dialed in, the prints came out nicely or as good as I could hope for. You could definitely use this to print for example; rc car/plane wheels, or other custom flexible parts. I found its a good balance between flexibility and toughness, but not very stretchy like a rubber band. Even test prints that were just a few layers thick, think a TPU pancake, held up surprisingly well. I am satisfied with this product so far and it's a fun material to expand what you can potentially 3d print that you otherwise wouldn't be able to do with PLA or other similar rigid material.

This is for the white 95a tpu. Great filament, cardboard spool. As soon as the filament arrived I loaded it up and printed a 9 hour print, a skull hair decoration with super quality. It was sliced on the cura slicer and printed on the creality k1 se. The bed temp was 65, extruder temp was 230. These were the same numbers I had used with the Amazon generic filament. Layer height was .12mm, and I used a textured build plate with gluestick. Supports were set to standard (not tree) and diect on build plate only. The model is stupidly complex for a simple item. Most of the first hour is simply creating the support scaffold needed to support the very random item. The clip was mixed from an anatomically correct skull, so the back has many of the irregularities a real skull would. This stuff printed as good as any TPU I have used. Zero stringing, very nice looking result. The filament was dry as received. I printed it out of a filament dryer with a humidity sensor. Damp filament will present with a RH of 40% or more and slowly drop to 25% as it dries. Then as it gets totally dry the RH will drop to under 20%. This filament dropped to under 20% immediately which indicated that it was well dry as received. I had zero problems with anything. Adhesion was perfect. Layer to layer looked good. Fine detail is better than recorded by the picture. The print was not post processed at all before the photo except that supports were removed by simply pushing on them, no tools used. Support separation was easy. The undersurface was slightly rougher than the top surface but barely so. The only thing I downgraded the filament for was the paper spool. My printer requires that I bypass the bowden tube and sensor, so I feed from a dryer above the printer, the pull is harder because there is a kilo of filament on a soft paper spool, digging in to thin rods that were designed to spin plastic spools. It worked, but probably any nick or irregularity caused by ordinary handling and it won't. I need to print some of the rings you put on paper filament but I have not yet done so. I recommend this filament highly based on my brief experience. Especially if you have a way of dealing with paper spools.

Very nice tpu for the price. Very durable and flexible. hard to dial in at first but with the right filament profile it prints amazing.

I love printing with TPU! It’s a bit tricky to setup but once done you are good to go. My #1 advice is to dry the living **** out of this filament. Hell I ran it straight from my filament drier. I live in Wisconsin where we get so much humidity, but this thing is basically a dehumidifier with how much water it'll absorb. Even straight out of the bag dry it more. Run it from the drier during print and voila you will have a perfect print everytime. I would recommend storing it in a bag with desiccant, but you will have to dry it again everytime you use it.

Great TPU filament, highly recommended. It prints perfect on my Neptune 4+ using Orca slicer. I have had no feed or extrusion issues at all. Really sticks to bed. I print this much slower than PLA or PETG, I am print it at 230C with 50C bed. You may need to dial your settings in. I make sure and dry all my filaments per the mfg recommendation.

Give the pink TPU95 a fantastic review, prints very well. Using an ender3 pro with heavy mods, however it does NOT have a direct drive. Printing slow fine detail print, running 225 degrees, .1 layer, 17.5-20 speed, infill @ 35, retraction 7 @ 25. Have to use random seams to get dimensional accuracy and turn down temp by 5 for small layers. I have an older half spool of Overture Orange TPU95 (2023). Even after drying and applying all the new, speeds, feeds and temps to this old filament, it is still garbage, 2 foot prints nice, then next 2 feet will flow 50%, the then next foot will ooze like soft server and harden up like PLA. Looking forward to trying the Overture High Speed TPU as it appears the TPU quality has greatly improved in 2025.

Bambu Lab A1とP1Sで使用しました。 AMSで使用できたという情報が海外で出ていますが、それはたまたまです。 いずれもAMSは使用できませんから注意してください。 まず、プリンタープロファイルは、公式サイトからダウンロードできます。 検索で「overture filament」で検索し、該当するフィラメントのPrint Profilesからダウンロードして、 ファイル→インポート→構成データ で読み込ませましょう。 これで断然印刷が高速になるほか、印刷が安定します。 若干、硬い気はしますが、仕上がりは非常によいと思います。

Résultats d'impression parfaits sur Bambu Lab A1 avec ce filament TPU Overture. Imprimante configurée en 1 clic sur "filament TPU", et c'est nickel. Le filament en lui-même est si souple, qu'il peut parfois avoir un peu de mal à être engagé dans l'extrudeur en tout début d'impression. Pour y remédier, pousser manuellement le filament par petites saccades en va et vient au niveau de l'AMS pendant une dizaine de secondes jusqu'à ce que la purge de l'extrudeur commence, et après tout fonctionne parfaitement. Excellent TPU, en tout cas avec une imprimante Bambu Lab, pièces imprimées parfaites et souples.

Using it on a Bambu lab X1C without AMS. Results were very poor, probably didn't help that it needed drying for hours before i could get a semi usable print out of it even then results were probably the worst i have ever seen. Overture and amazon basic filiments are the only two I've had real problems with. Im fairly sure this is the same company who used to do the amazon basic filiments.

常用TPUです。Bumbuの設定を基本として少し変更をしましたが、ほぼBumbuの設定そのままでも使えます。 糸引きは少々有りますが、TPUとしては使いやすい方だと思います。

Dopo un pò di prove è andato bene, mi sembra un buon prodotto.