SLxLNB 2 Quad Output, LNB for Satellite Dish Freesat/Satellite Recievers, KU Band, Universal LNB for Sky HD, Sky HD+, Freesat HD, 25MHz PLL Crystal Technology, Includes MK4 Bracket

I got the 2 output device as it's all I need here; I was upgrading the LNB on my current Freesat installation.A while back I noticed that certain channels wouldn't work so I did the usual re-tune and indeed a factory reset, which didn't fix it. I also read on the Freesat info pages that an overhaul of the channels was underway starting in early 2023, so I suspect a couple of things; My original LNB was actually packing up, but also with it being about 20 years old it's not compatible with some of the latest channel updates? Either way it wasn't working for some channels.I have a basic but quite new Manhattan Freesat box to watch certain channels that I can't get on standard Freeview, so that's up to date hence suspecting the LNB.Installation of this one (ie swapping out the original) was easy peasy. Took off the coaxes from the original, undid the collar clamp, took it out and put this one in, had to use a slightly longer screw to clamp it as this one is a tiny bit fatter round its neck, reconnected coaxes, plugged back in the Freesat box, did a factory reset and channel scan... hey presto in less than half an hour in total my Freesat is fully working with all available channels bar none.Very happy with this LNB, hopefully it will last like the previous one and give me 20 or so years service, and for a tiny cost of under thirteen quid it's a simple fix.

Got this to replace broken one , works perfectly and easy to fit

Replaced a sky unit with this for a freesat box, and worked like a dream, only downside was I couldn’t lock it in place so had to tie wrap it, it’s slightly different to a sky receiver but it won’t make much difference. Can now get the majority of channels including some sky ones too.

It doesn't fit the sky LNB bracket on a sky dish. The description also says it "Includes MK4 Bracket". If like me you don't know what a MK4 bracket is - a quick google suggests its a 40mm LNB bracket which would have been perfect if it was included - it is not.While the existing sky LNB bracket is smaller than 40mm - with a mix of tie wraps and insulating tape I made a secure connection.Now if your wondering why I rated four stars when it doesn't fit a sky dish, and doesn't come with the advertised bracket - here's the rub. My satellite receiver indicated strength and quality of signal 100%. I cannot get near 100% with another dish fitted to the house - so its four stars for the LNB from me.If you can get past that the LNB doesn't fit - the fitting instructions that accompanies the LNB are also great.

...

Perfect, when mine packed up, this replacement from the original sky one got me out of trouble, easy to install, only downside and it didn't get 5 stars is it didn't come with the bracket like advertised, so had to use the original one.

It was very easy to replace existing LNB. I chose to use the non spirit level option LNB, which meant I did not have to make any adjustments to the dish, just replace the existing LNB with the new one in exactly the same position.Problem started when I started to loose HD channels and then other channel. I wrongly concluded it was some trees in the garden that needed trimming, but that made no difference. A friend suggested I tried replacing the LNB. This resolved the problem completely and all channels were restored instantly

Thank you, I am satisfied.