Nilight - 60005C-A 20Inch 126W Spot Flood Combo Led Light Bar Off Road Lights Boat Lighting Fog Light Driving Lights LED Work Light for Trucks, 2 Years Warranty

The media could not be loaded. So far I am extremely impressed with this light bar. There are larger ones, but I can't imagine where or when you could even turn them on... I can't turn this one on except out driving in washes and dirt roads at night, hopefully with a forest around me or I'm going to blind everyone for half a mile. See video for details.I installed this light bar in about 20 minutes on my new Ranch Hand bull-nosed front bumper, after reading reviews and specs to be sure it would mount directly to the bumper light mounts with no adapters or brackets needed, and indeed the holes aligned perfectly. Some reviews have mentioned that the brackets arrived bent, and that they had to be bent to fit - partly true, but they didn't get bent in shipment, they were identical in their "slightly too narrow" aspect. This is intentional, so that when you slip them over the part that attaches to the light bar, it is held tightly in place as you stick the screws into their holes. So forget that whole "bent in shipment" thing, they are made that way on purpose.Unfortunately, the bumper had big holes in the light mounting tabs, so I did have to go to Home Depot to get some big washers, so add 20 more minutes for that side trip. But that's not an issue with the light bar, more like an incompatible bumper that needed a little help to be securely affixed. Your bumper or mounting location may work just fine without any additional hardware.I was having a new radio installed, so I had the radio installer at Best Buy pull the wires from the new Nilight dashboard switch ($10, also from Amazon) and connect it all up with soldered connections and heat shrink tubing like he did for the rest of the cables... That would have added a couple of hours if I had done the wiring myself - but since they had the dashboard apart anyway, this just made more sense to me. The zip ties in the photos were temporary until the wiring job was completed, now all wires are secured with black metal wire guides along the back sides of the bars. I did have to drill a hole in the bumper metal to route the wire - no big thing, and the Best Buy guys had a black grommet which fit perfect. Pros over there.You have to have the LEDs on to align the light bar correctly - my best eyeball guesswork was making a big bright spot on the ground right about where the low beams hit the ground. Adjustment is simple, if you have the right screwdriver (varies depending on the bumper and mounting location, what all is in the way, etc). Alignment took 5 minutes or so. The light bar gets quite warm to the touch as expected, but at no point was it too hot to touch during the adjustment operation. Hot but not enough to burn you or be a hazard.I very much like the arrangement of the 6 right and 6 left LEDs being flood focal length reflectors while all of the rest are long-throw spot focal length reflectors. You can see the difference in some of the pictures, and in those from other reviewers. You get a perfect mix of nearby and "way down the road" illumination. Check out the pictures and video - this thing looks great, works great, had excellent pricing for the performance, and is obscenely bright. Wow. Highly recommended!

After reading some reviews about this light, I wasn't sure what to expect. The light came well packaged and double boxed so there wasn't any issues with damage in shipping. When I opened it, I was surprised at just how hefty it felt. This isn't a cheep plastic light and it seems very well built. I was concerned that the mounting brackets might have problems based on issues other people had, but they were fine. The brackets themselves do seem a little on the thin side, but once mounted they feel sturdy enough.I also ordered a mictuning wiring harness with a 30 amp fuse mictuning LED Light Bar Wiring Harness 30 Amp Fuse ON-OFF Laser Rocker Switch Blue(2 Lead 12ft), but I ended up wiring this direct to the wires that the stock fog lights were wired to on my 01 Jeep TJ, so I didn't use it. I am thrilled that I don't have to drill any holes in my dash for more switches.Mounting this was a breeze. Total installation time to put it on my E-Autogrilles bumper E-Autogrilles 87-06 Jeep Wrangler TJ/YJ Off Road Front Bumper with 2x D-ring & Winch Plate (51-0034) was less than 20 minutes, including wiring. It's just one mounting bolt on the bottom of each of the two brackets, and four bolts on the side of each bracket plus two more allen screws to secure the light once centered in place.I turned this baby on and walked in front of my Jeep and couldn't believe how bright this was, even in sunlight. The side most six lights on both sides scatter their light and the inside bulbs are concentrated to a round beam that shone on the back wall in my garage.I've seen similar lights to this at three times the cost. I definitely recommend it.UPDATE: Well, I've had this on for a few days and tonight my wife pointed out that 12 of the lights on the right side are out. Honestly I didn't expect this to last all the way through the two year warranty, but this is a little soon for it to be failing. I've reduced my 5-star rating to 3 star and I'm going to get another one to give them the benefit of the doubt. This is probably a wiring issue rather than bulbs blinking out because it's a cluster of a dozen lights all grouped together.UPDATE 2: I got the replacement super fast and installed it right away. It's been working all summer without any issues. I do have to say that this light is too bright to use on the highway when there are other cars around. I only use on trails (and when people cut me off on the freeway) :pI'm upping my rating back to five stars. I'm very pleased.