Color N Drive Car Ceramic Coating Sealant Kit Paint -50ml-9H

I get same like describe photos, packing was very nice also microfiber towel quality is very good. I will comment again when i use it on my car. Thanks

Risultato impeccabile,ora speriamo solo nella durata nel tempo.

Used on my Tesla Model Y. Good result. Enough ceramic for 2 coats. The pre-treatment though we have just enough. To help spred the ceramic with second quote I sprayed very little distilled water. They should give more micro-fiber and I recommend to wash the microfiber first. By the way after the washing the car, if you do not have a clay to remove last contaminant you can at least use distiled water that you let it damp to suck any materials for few minutes before wiping with very clean microfiber. For Model Y do not forget to do the black plastic trim around wheels as they suck the dirst easily by nature, putting ceramic make them a lot more dirt repellent.

Top produit recommandé si on respecte la préparation avant l’emplois top facile d application. Résultat parfait.

I Applied this to my 2017 Silverado. The truck was brand new at the time, having about 180 miles on it at the time of application.My Thoughts and notes:- I pretty much Ignored the included instructions. They weren't very readable, and had been translated poorly. Thankfully, there's a lot of advice, and lots of videos and tutorials out there to help.Before Applying I did the following -1: Thoroughly Washed the truck2: Clay bar'd it. (I probably din't HAVE to do this, but if one is unsure, i'd highly recommend it.)3: "Pre Treatment" Bottle. I believe this is an alcohol solution. (This, however, IS required)Total Pre-Treatment time was a little over 2.5 hours for me. (The car was pretty clean before hand)As for the application of the coating itself, i applied the coating about 1 section at a time. It was only about 50 degrees outside at the time, so i had to do a little bit of waiting before removing the excess. (7 or 8 minutes at 50 degrees, just a note) Removal was relatively easy, without much smearing to take care of. I switched microfiber cloths about halfway through the job. Total time to apply was a little over 3 hours for me. would have been faster if i hadn't had to wait after each section for it to dry. (Make sure you take your time when removing this stuff, and don't miss spots.)After applying, I actually didn't notice the huge improvement in gloss that a lot of people see. I think this is a) because it was overcast outside, making it a little tougher to tell the difference, and b) because the truck was so new and glossy already.It DID, however, have a marked improvement on shedding water. Just like a fresh coat of wax, this sheds water like nobodies business. How long that lasts, I'll update in the future sometime. Additionally, It was also markedly smoother after application than it had been before.All in all, I'll be VERY happy with this product if a year down the line, it sheds water like it does now.6 Month Update -After 6 months of daily driving, and nightly garage-ing, my truck still does a pretty good job of repelling water, and is still relatively glossy. A touch-less car wash can get rid of whatever road grime comes on my truck pretty easily still, so it's still doing a good job there. Unlike a standard wax job, where I'd probably be looking at a sheet of water on the hood after a rain by now, this one still beads up reasonably well. It seems to be definitely longer lasting than the usual car wax, but at the same time, definitely not quite as water repellent as it was at the beginning. My guess is that I'm about where i would be after 1 to 2 months of using a regular wax, so by my guesstimation this stuff is lasting about 3 to 4 times as long as a regular wax.

This kit is fantastic! Everything shown is provided to apply the ceramic coating to your car. Came with 2 applicator sponges and a couple of microfiber towels which are really good quality, there are now some readable instructions in the box rather than the old grey font on a black card! :) (thanks for changing that)Buy a spray bottle to damp your microfibre towel is all I would suggest or maybe color n drive could include an empty pre applicator bottle??Update: 07.10.18I ceramic coated my Ford Focus rs, results are really pleasing the pictures speak for themselves.Applying is really easy just follow the instructions just remember to try get your car as clean as possible before applying this! Yes you can use it over wax not the other way round!1) washed my car using snow foam and micro fibre towels to dry2) poorboys light swirl remover3) wash again to remove all left overs4) wax (didn’t clay bar as my car is pretty new and doesn’t need it)5) ceramic coat following instructions6) top up with future armour by dodo juice which is spot on.The beading is great, I’ve got enough to do another car as well, try and do it with someone as it takes far less time than doing it all on your own.