VIVO Heavy Duty Dual Motor Electric Sit Stand Desk Frame, 220 lbs Capacity up to 85" x 43" Tops, Memory Controller Height Adjustable Frame Only, Black, DESK-E-200B

Really nice legs. I feel like they are very solid. I’m 6’ 3” so my standing height for this desk is 45” and it seems very stable. Does the desk shake, yes. It’s 45” up in the air, it’s gonna shake. But it’s very minimal. Others here had me convinced it’d be dang near collapsing from shaking and wobbling so bad. I even put a larger desk top than is recommended, (96” x 24” x 1-1/8”) and it’s working great. Only “issue” I had is the programming. Manual says to push and hold “S” until it the LCD flashes. You press “S” for 1 second and let go, then the LCD flashes “S -“ and it’s ready for setting 1,2, or 3. Assembly was easy. About 15 minutes. Good hardware, everything was threaded nice. I was able to tighten everything very tight, with a 5mm T Handle even, and nothing stripped. Haven’t had it up very long yet, but so far I am happy with it.

I like to live with a product for a while before I review it, especially things that are a bit more complex. I've had this set of legs built into a desk for several months now, and I love them. I was impressed at the build quality, and I am really very picky about such things. Everything was solid, heavy-gauge metal, with quality joints. Despite what a few reviewers here said, I had no problem with screws aligning with their holes. I even took apart the motor compartments to check the innards, and they are rather robust with a good quality grease. The electronics box is also well-made and safely designed. I ended up making a table top out of three of the cheapest pine 1x8 boards from Home Depot, biscuit-joined at the edges, routed to break the corners, aged with an iron acetate solution, and varnished. For what I considered to be a quick and temporary top, it turned out gorgeous! But enough about the wood, how about the legs? Well, they are fantastic. The control panel is a bit un-intuitive, so read the manual. It's not hard, just non-obvious. The panel itself is made of plastic, and possibly at risk of breaking if you crank the screws down hard or ram into it with a chair arm, so mount it carefully. I put a couple thin rubber pads between the plastic and the desktop to give it a little resiliency. Also, I did not use the rubber pads between the leg unit and the desk surface. I think there should be a few more of them, and in the end I couldn't figure out a good reason to bother with em, so I screwed it directly to the legs. I've had no problems at all with it. Perhaps they are meant to reduce conducted sound and make the thing quieter? It's not loud, anyhow. Be sure the area is clear when you raise and lower the desk, so it doesn't crash into something. Also note, that the control box has a bit of a magnetic field to it, probably from the transformers inside. I only noticed this when having a quadcopter drone on the desk, and it would throw compass magnetic interference errors. It causes no problems otherwise. There have been two occasions where the control panel locked up, and necessitated me unplugging and reconnecting the power to the desk. I don't fault the desk for this, as sometimes electronics just get jinky, and it's been rare and easily cured. I can heartily recommend these legs, and I wish I had done this sooner! All future work surfaces and desks in my life will be height-adjustable - it is so amazingly convenient!

Super easy install and works great! Seeing as there are so many options out there that can be quite pricey this product is a fantastic alternative without loosing quality and function.

Very happy with the product, extremely well made and heavy duty. Delivery was very fast, just a few days.

3 MONTH UPDATE: TBH I must of just been frutrated, i didnt end up returning the 2nd one, and the rubbing noise has become less and less, must just be rubbing out the paint out. I am actually ordering another one, but in white. Upgraded it to four stars because have had no other issues besides the initial bent pin, so just when assembly watch out for that and it should be great. Overall i must be the most unlucky person ever, to be honest all these desk are from a similar distributor with a sticker on top of it, if you get one that is not broken its a great desk! Pros: Easy set up, super fast! Dual motor, strong and quiet Very sturdy, cable managing and everything included is awesome. Issues i had with this item: 1st one i order all i did was plug in the motors to the controller and it bent! The pin outs are not align correctly you HAVE fidge it around to plug it in with out bending the pins. I had to return it because it worked but now it was broken out of the box. 2nd one i ordered, everything is great and PINS were same issue, but this time around i was aware that the product has this issue so i did not break it by simply plugging in the controller, but on the way down it make a creaking rubbing sound...so i have to order another one to replace this leg! This item had 3 year warranty but this thing sounds like its going to break eventually , what ever is rubbing inside the leg. I really like this kit. The welding is great, and the assembly is simple and routing and cabling everything is GREAT, love the look, but the quality issues ive having is such a bummer! I have to wait to return my 1st,get a refund then order a third. UGHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

Standing desks in general: I love the stand-up desk, and I easily spend more than 80% of my time standing. Having the desk go up and down is key. I tried a standing desk earlier in life, but it failed because I didn’t want to stand all of the time. The adjustability is key. Correct height is critical for a standing desk since you can’t adjust your chair. This desk frame: I’m 6’4”, and this three-stage desk goes high enough for me. I’m using it about 2cm from the top height. I’m using a tabletop that is 69” x 37”, and it works well. It moves a little front to back, but not enough to matter. I have it on a thick rug, which probably contributes to this. The desk rises and lowers quickly. The assembly was very easy. I love this desk frame and highly recommend it.

Reçu rapidement , avec un montage très facile A l'utilisation c'est parfait Seul regret ne descend pas assez bas pour moi (70cm)

I am very happy with this purchase. The frame is solid and seems to be good quality, but isn't insanely heavy. Assembly was easy. Raising and lowering is very smooth and makes a pleasant sound.

Love it

La calidad es tremenda y super fácil de armar me encantó

I couldn’t be happier. The frame is solidly built. The motors sound high quality. The top is taken from my old IKEA desk. 10 out of 10 high quality product. Highly recommended.