KaisiUltrathin Steel Professional Opening Pry Tool Repair Kit Multicoloured 4335017478
J**T
Es un producto bueno en relación a su costo,
No son para uso rudo, se recomienda solo para smartphones o relojes digitales pues son pequeños
M**H
Do not buy!
In short, I do not recommend it.In long, this does not work. It will not hold straight. Consequently, the rubber paddings will slip out because the alleged glue that was used to stick those paddings appears to function like some kind of essential balm.See the image with four clamps. I had to put the displaced rubber paddings back to where they belong and tighten the clamps back, as seen with the two clamps on the right side, and on wrong side, err, I mean the left side, the two are what they looked like after use.This is a very sorry piece of engineering. Even Stephenson’s Rocket, built in the 19th century, probably had tighter mechanical tolerances than this sorry excuse of a clamp.Is it any good at all? Yes, probably for clamping postage stamps onto envelopes.If you value your time, or money, but most importantly your time, do not buy these contraptions.
J**S
They work really well
I really like these for phone repair. Especially when I need to use adhesive to seal a screen and need exact pressure to avoid any damage. I also have used them for crafts when needing to secure some fabric down.
B**N
Count your tools, mine was missing the 1 x Metal i6 rubber spudger.
The toolkit arrived quickly. I used it and all the tools were great for taking apart a Logitech G500 mouse. The metal spudger was even able to remove the delicate silicon pads on the bottom without damaging them and I was able to carefully reuse the adhesive to reattach them. The pry tools worked wonderfully at separating the mouse and the tiny screw drivers worked perfectly for the tiny screws inside the mouse. The tweezers were great for manipulating the tiny screws out of and back into the screw holes.The bad news is that my kit was missing the "1 x Metal i6 rubber spudger" It just wasn't in the box. I contacted the seller but they told me it was an FBA order and told me I had to go though amazon to get it replaced. They gave me the phone number for Amazon Digital Services. Amazon will only accept a full return on the kit and replace the entire thing. I have to ship the old one back or I will be charged for another kit.The tools are great, the kit is really nice. I would give it five stars but with a missing tool and the hassle I would have to go though to get it fixed, I just can't give it more than three stars.If you buy the kit, count your tools and don't count on Kaisi support.
C**T
Lifesaver
These were necessary when i reapplied the screen to the frame. Once I applied the adhesive tape, and screen placed; I found the screen will not settle completely- (“very little bit noticeable, and definitely not watertight”). The adjuster’s easily opened up thicker than my 12promax and closed down easily for small adjustments to all for with a nice soft grip. It’s good to find the best locations so that it will apply pressure across the screen to allow the adhesion to cure and setup. Within a short time remove and inspect. You can achieve compression with a large book or by applying constant pressure manually, but you risk to little or to much with no control. That’s all.
Trustpilot
3 days ago
2 months ago