BINGFU U.FL IPX IPEX MHF4 to RP-SMA Female Bulkhead Mount WiFi Antenna Cable 30cm 12 inch 2-Pack for Intel AX200NGW 8265AC 8265NGW 7265AC 9560AC M.2 NGFF Interface Wireless Network Card WiFi Adapter

Got these to use with an Intel AX210 WiFi card, and they're so far working perfectly fine.

Good cables if you are missing any!

These were pretty easy to put on all you have to do is snap them onto your wireless card and run them to wherever you're going to put your antennas. It was a little tricky getting them to snap onto the wireless card since they are so fragile. The best way I found was to line it up perfectly over the top and make sure it goes on straight down and you'll feel it click into place. Luckily I did it on the first try but I could see how you could bend them if you weren't careful.

Great quality and fit perfectly. Note these are EXACTLY 12 inches long. They worked for my Dell 9020M (USFF) but measure carefully if your application is different.Also, be VERY careful attaching the M.2 card connectors. They have to be centered above the card connector precisely before they snap into place. If you don't feel a distinct snap, you didn't get the connection made. Don't force them as the tiny UFL side will bend out of shape, making attachment impossible. I find it easier to attach the connectors with the card unmounted and then insert the card to the M.2 slot.Also, it helps to use a drop of Loctite (or super glue) on the RP-SMA bulkhead nuts so tbey don't loosen over time--a common issuue with this style connector. Saves some aggravation later.I bought another two sets after the first one.

Got this for an ASRock b550 pg with the bracket for these wifi adapters and an m.2 wifi slot, the little connectors are ridiculous to connect to the WiFi chip, but it works great and good price.

Paired this with an AX210 card in an older HP 600 Prodesk G3. The gold plating helps keep down corrosion and oxide noise from the RF signal. The signal was very good afterward. Very happy. I wish they had a longer version for another project I have going on ...

These do not fit an IPEX connector WiFi , and the quality of the cable ends is very poor. They will not engage with an onboard WiFi connector. I could not provide a more cohesive review because they would not attach to the IPEX connector on my board.

I’ve had to order quite a few things like these cables in the past, and I’ve always had great results with Bingfu products. These cables were no exception.The cables were in perfect shape and everything fit well. They carry the signals without any significant loss.Make sure that you’re buying the correct SMA sex, as these cables are reverse-polarity SMA connectors.