New Washer Drain Pump DC31-00054D DC31-00187A PX3516-01 for Samsu.ng Washing Machine Models in the WA4, WA5, WF2, WF3, WF4, and WF5 series by TOMOON

My Samsung washer was giving me an error code involving a draining issue, code 5C. I cleaned the drain filter and checked to see if there was a blockage in the drain tube. Neither of those solved the issue. The issue was that my drain pump had gone out. It was humming and getting power, but not draining during the cycle.This install can be very easy. Turn the washer on its side and there should be an access hole in the bottom (if you have a front load washer). You can access the drain pump motor and housing there. There are also two screws you need to remove right next to the pump filter. On the housing itself there are three screws that hold the motor in place. There are two (maybe more or less for you) black hoses that need to be removed as well. You do not need to remove every hose, you just need some room to work and move the pump housing around. Take some pictures before you start working and while you are working so you know how to put everything back together. Pay attention to orientation and coloring of the wiring, take a picture of that too.All you need is a screwdriver to complete this install. Take your time and believe in yourself.

Great Chinese aftermarket part washer still going strong after 4 months and I have 4 kids if that tells you anything

I was getting the SC error code on my 5 year old Samsung front-loading washer, which means there is an issue with it draining to slow. I looked at the the OEM part and Samsung wanted $179.99 for it. But I also came across this one, which is obviously exponentially less money. So I ordered this one. It came quickly. I followed a YouTube video that tells you to take off a bunch of stuff, including the back, top, control panel, door seal gasket, front panel, and some other steps. I know another review mentioned just going through the bottom, but my concern with that was being able to sufficiently reconnect (I believe it was three) hoses and clamp them correctly. So I followed one of the several YouTube videos that showed them taking all the stuff off that I already mentioned. Fast forward to over a month later, it still continues to perform perfectly. I would definitely buy this part again, although I'm hoping I never have to do that repair again.

Fit perfect worked perfect. Very easy to install if you tilt the machine back and take it out from underneath. Washing machine it’s nice and quiet again and as easy as it is to install and is cheap as it cost, I’d feel like it’s a good deal even if I had to replace it a couple times. do yourself a favor and tilt the machine back and take a look at how easy it is to remove and install from underneath. First time I ever worked on a washer and I removed and replaced the pump in about 15 minutes or less. All the videos I seen, want you to take half the machine apart it’s not necessary to go through all that definitely worth the money

Easy to install and works great. Also great price for the pump.

This pump fit and worked perfectly. When disassembling the old one, pay attention to the orientation of the electrical connections because the pump can be turned to match.

Use thw pump for just a week. Pump is already damage, pulling high amperage almost damage my circuit board to my washer

Just before thanksgiving my washer stopped draining. And it kept refilling the water. I called for a service technician and he told I needed to replace my water pump and it would cost me up to $600 for the part and service.I said no thanks. I ordered this part from Amazon. Looked on Youtube and installed the part. My washer is working even better than before!