Elite Screens Aeon Series, 120-inch 16:9, 8K / 4K Ultra HD Home Theater Fixed Frame EDGE FREE Borderless Projector Screen, CineWhite UHD-B Front Projection Screen, AR120WH2

Bottom line, this screen produces amazing picture quality and images from my Vava Ultra Short Throw Laser Projector. Screen size I have is 103 inches. I have no regrets purchasing this product. But keep in mind that assembly is time-consuming and very tedious. Took around 5 hours to fully assemble and hang on the wall. One thing that bothered me was that the manufacturer gave a link to an assembly video, which contradicted the written instructions that came with the screen. For example, the video showed two people rolling out the screen with no gloves, yet two pairs of gloves are enclosed with the screen, as you cannot touch the screen without wearing gloves. The video showed one person attaching the springs from the frame to the screen, by himself, and starting from one end of the screen, whereas the written instructions clearly indicated that you need two people, each starting at the center of the screen, then attaching the springs from the screen to the metal frame. It is most frustrating to be left confused while trying to figure out the correct way to assemble this. We wound up following ONLY the written instructions. Once all the springs were installed, we had to remove them all and take apart the frame as well and start the whole process over, because it was not lined up correctly. Second time around, it was fine and now we can finally enjoy the screen. I enclosed some images with all lights off and all lights on, and you can see the picture remains bright and crystal clear in any light setting, the reason we needed the AEON CLR 2 screen. We tried a much less expensive white screen initially, but it was quickly returned, as the picture was very washed out. White screens are necessary if you have a home theatre room with no windows or lights, so as to get the best picture. In rooms like mine (the living room, with windows and lights), you need this screen or some type of ALR screen. I was tempted to take off one star for the conflicting directions, but in all honesty, I am very pleased with the product. Just would ask the manufacturer to provide more clear and consistent instructions with this product. And remember, despite some reviewers claiming to have assembled this in 20 minutes or in some short amount of time, I find that very hard to believe. Plan on spending at least a few hours with two people, and if you complete the assembly in less time, that’s great. But don’t think it will take little time and then become frustrated that it is taking longer. Hope you enjoy this magnificent screen as much as I am.

Received an Aeon Edge Cinegrey 3D 100 inch screen from Elite Screens. It couldn't even be assembled as they clearly sent the screen material for the next screen size down - so the material could not be fitted to the frame. The use of velcro to tension the screen also seems really poor for a circa £500 product.

This is an EXCEPTIONAL product. i have yet to take good pictures but those will be up in the next few days while the whole system gets settled into its new location. Pros: Seemingly aircraft caliber aluminum construction frame built like a tank VERY nice attention to detail Easy installation Breathtaking "floating" screen appearance, with or without the included diffusion velvet. KILLER customer service Cons: Although on the lowest end of the ALR spectrum, it is still a considerable cost when you can buy a lower end 4k LCD with HDR at 40-49 inches for the same cost. this is just a screen. literally, a screen. its 100+ inches (102 if you don't use the included velvet) but its still a glorified screen. This is an outstanding product. I buy from online and in person retailers all the time. I would even consider myself somewhat of a tech junkie, though my budgets keep my habits somewhat in the realm of affordability. This screen performs exceptionally in every area i hoped it would, and then some. The box arrived at my home in typical amazon "how the heck did they get it here so fast?!" fashion. excited i took it up to the media room and did a quick inventory check. Immediately i noticed several things. First was the actual box. other than it being brown, this is by far the nicest box and packaging for a shipped item this large i have ever seen, even the mailman mentioned it "man this feels like a solid box here". He was spot on. the packaging is so well thought out, you would have to go through 3-4 layers of cardboard to even get to anything actually inside the box which is important when dealing with a product that is ruined by any punctures or damage whatsoever. After the box was opened (very easily i might add) i pulled out the two individual "boxes" inside and the accessories boxes as well. one has the tape, one had the right angle attaching rails and one had tools. About those tools...i don't know what made them decide to do it, but these are the nicest tools i have ever received to use with a product. i have never in my life received tools with a product that made me think "ohh I'm keeping and using this screw driver after this". this product did that. they also give you a small mallet that comes in handy and it too is of such good quality it wont just go back into the box and never be touched again, "im'a use that sucker". the material itself looks to be very high quality aluminum. i have absolutely no doubt the frame will last forever. everything that was supposed to be there was in fact there. I opened the manual to see if i needed to do anything different than the very obvious when putting it together and I'm pleased that the answer was "nope". The manual was easily understood and had a clear English section however, in case you couldn't figure any part out. the only thing i could see that would even throw anyone off would be the center support beam. Something to note, as it is installed with its top and bottom hole attached to a different kind of screw then the rest of the unit. it has a head that goes inside the inner rail on the backside of the screen. If i didn't look in the instructions, i might think it was missing something needed to install it, so if your reading this just take note of that, i read several reviews of people knocking down a star because the center support beam "didn't fit". i honestly think there's a more than good chance half of those people (prob all of them honestly) just didn't read how to actually install that section in the manual that is clearly shown. the screen attaches around the frame via Velcro. As a drummer i noticed the attachment pattern was very similar to that of a drum head, you always tighten the opposite side first and move around the frame in a pattern to easily and even tightened the screen around the back. I noticed that many of the high end companies that sell similar screens tend to attach the screen to the frame with eyelets. either snap in, or tension band attachment. for those of you concerned about the Velcro, i wouldn't be, "this sucker ain't goin' no where". Once its attached. and after thinking about it, Velcro is the obvious choice because if the screen de-tensions over time, re tension of the screen is easily done here...MUCH harder if the screen had attachment holes in the actual screen material, so i say "great choice". The wall mounts are more than adequate and come with screws for both going into a wall stud, or going into drywall safely. The screen rests on the wall mounts in a channel at the top of the frames back, so once its up, it can easily slide left and right for finer tuning placement in those directions, sorry but no up and down adjustment, in my opinion though that adjustment is completely unneeded. The screen itself took a little time to get perfect when attaching it to the frame, but no more than expected really. Once on the wall you realize "DANG, that is a BIG screen". the room i put it in is about 16 by 25 but you cant appreciate how huge a screen that's nearly 8 feet wide or bigger is until you are actually physically looking at it. I'm totally convinced that if these ALR screens were more commercially marketed with mid level projectors, that they would actually out sell regular televisions, even 4k models. for right around two grand US, you can truly achieve a mind blowing picture at an even more mind blowing size. Pairing my screen (ALR cinegrey 3d) with the Epson 3500 in a somewhat well lit room with a pretty standard ambient day room light almost made me pee myself. i was hoping beyond hope that the projector technology had improved from what i had seen years ago and would look acceptable in a somewhat well lit room (pictures to follow in the next few days)...it isn't just acceptable, it is absolutely fantastic, and envy inducing to anyone that doesn't have this kind of setup that sees it and likes "big". when the lights lower, and at night, it is breathtaking. i actually use this as my main computer monitor and i am more than pleased to say it looks better than my "old" 65 inch led. I can tell you too, that it isn't just the solid projector I'm using designed for rooms with more ambient light, but the screen as well. in fact, i would give a heavier visual "WOW" to the screen than i would to the actual projector which is outstanding too. What you have in the end is an absolute no brainer buy for anyone who is looking for a fixed frame projector screen. is the black diamond better? the high end Draper better? only until you compare cost to the elite screens, then those screens go from being slightly visually better to being WAY, WAY worse because they are thousands more. If your on the fence, don't take my word for it, get it yourself, THEN feel free to thank me if this review helped you at all.

I got the 110in. It turned out great, and made a great addition to my setup. I’d say I’m pretty fit, but the day after putting this together my body felt as sore as it would be after hitting leg day (probably because of the constant bending down to assemble each part). Not a bad thing, just something to be aware of. Assembly took me about 3 hours. However I would not be surprised if someone took 1 hour or 6 hours to assemble this. After assembly, there are a few very small wrinkles that are only visible from a foot away. They include everything you need to assemble: screwdriver, spring pull tool, and even cloth gloves to use when handling the screen. The only thing I didn’t like is how they market this as being able to put LEDS behind it, however, I assume they are talking about the 3D cinegrey version because the manual for the cinewhite version I got, says they do not recommend using the led kit with this screen, as the bezel touches with the wall. Speaking of the bezel, it looks great. The premium feeling velvet material looks way nicer than the thick version ones. Overall, very pleased, would recommend.

Rien a voir comparé à une toile ordinaire top !