4 Pin LED Splitter Cable Flex LED Strip Connector 4 Way Splitter for One to Four SMD 5050 3528 2835 RGB LED Tape LED Ribbon LED Strip Light -30cm/12in Long (1 to 4 Splitter, Black, 2pcs)

Works great, as advertised, looks good. Highly recommend

These 4-pin splitter cables do what they were intended to do. The RGB pins slide into metal lined holes when making an electrical connection and can easily slip out of those holes. That problem isn't a fault of the TronicsPros splitter cable, but is innate in the design of the RGB 4 pin connection. I motherboard manufacturers designed the RGB connection as an after thought.There is nothing a splitter cable supplier like TronicsPros can do about this connection weakness. I used black electrical tape to secure the 4-pin splitter cable connections together. The tape doesn't show in the black desktop computer case and its taped fastness allows me to manage my cables without concern of a connection coming undone when being stuffed out of sight. My case and fan lights are now fully functioning and I thank the TronicsPros RGB three way splitter cable for making it possible.

There is no adhesive. It's just a splitter. Works great but connections are not tight. I heat shrinked all the connections.

This device allows you to wire different sets of LED lights by using a single feed. This allows a parallel feed vs a series feed. LED lights work properly when they receive equal voltage. There is a voltage drop if wired in series and the lights at the end of the string will not be the same color as the ones at the beginning because of the voltage drop. See the distances between the columns in the picture, yet all lights are the same color even though I had to snake lengths of feed wire to reach all the columns. Also, what you don't see is that there is a fourth string of lights lighting the ceiling area in the room itself.

Great for installing led strip lights.

I used the splitter cable to connect 3 RGB LED strips to a single RGB LED strip controller, and it works fine. Plug and play, without any problems. I recommend it. When connecting the splitter cable to LED strip, you need to match the arrows on the surface of the 4-pin female connectors.

Although I can't speak for the splitting property of this product, it still seems to be of high quality. I bought it so I could use one of the outputs for a project I was working on. The only issue I see is that you can't tell which color wire goes to which pin. I don't remember, but I don't think the colors matched with my particular LED strip project, but I fixed it by simply moving the wires around. However, this will not effect any normal application because the only thing that matters is that the wires for the outputs are wired the same as the input, which I would assume is true although I didn't dissect the product that far. Overall, the product is sturdy and worked for what I needed it for.

Works fine but 2 issues. First one is that if you're using this with an Asus Aura Sync board, you will need to remove one pin from the included adapters with a pair of pliers. Second, these will not stay connected to anything unless you tape the connectors together.