2 Garage Door Opener Remotes for Wayne Dalton Wayne Dalton 309884 3910 297132 303 mhz

It was actually easier than I thought. Here is a tip, there is a gentlemen who is on the reviews who wrote down the instructions;, find it and follow it.

Easy to setup.

If you buy this, please scroll through the reviews to find Dan B's. It will save you a ton of frustration. They really just need to copy his instructions and include it with the remote as the instructions that come with the remote do NOT work (note, they also send you a link to a YouTube video. I did not watch the video so I don't know if it has the proper instructions or not). Once you have Dan B's instructions, it is easy to set up and use. I have a WD Quantum 3212

It says right in the description that this opener works with wayne dalton quantum 3213 openers, and for me it did not. I even looked up the owners manual for my 3213 and followed the learn procedure, I have attached a screenshot of those instructions to hopefully help others. The instructions that come with this opener are not correct either. According to other reviews of this opener, some people say that they were able to get this opener to work with the 3213, but that was not the case for me. Spend the money and get an opener from wayne dalton and you will not have any problems.

Definitely must follow Dan B programming directions in the reviews of this product. I tried to do it with the instructions that came with it, but it did not work! after a few tries with the Dan B programming instructions I was able to program both remotes. And even my old remote was reprogrammed after using his review. But still keeping these because they are in much better shape than old remote. I have the Wayne Dalton 3016 model and this was the only compatible remote for it I had found on Amazon. After being without remotes for so long, this is like heaven!

DID NOT COME WITH INSTRUCTIONS!So either search online for Wayne Dalton 309844, or use this information, pasted from there. Follow ALL the instructions.Programming a Transmitter (1,2 or 3 button) to a Quantum™ and Classicdrive™ OpenerNOTE: You must change the transmitter’s code before programming the transmitter to the motor head unit.Changing the Transmitter Code1. Press and hold the button on the transmitter that you want to change. The GREEN LED will flash once andthen turn off.2. Continue to hold the button until the GREEN LED begins to flash (approx. 10 seconds).3. When the GREEN LED flashes, immediately release the button and then immediately press and hold thesame button again. The GREEN LED will now come on steady.4. Continue to hold the button until the GREEN LED begins to flash (approx. 5 seconds).5. When the GREEN LED flashes, immediately release the button.6. The code for this button has now been changed to a new randomly generated code. Do not press the buttonagain until instructed in “Programming Transmitter to Power Head Unit”.7. You must now re-program this transmitter to the motor head unit. See “Programming Transmitter toPower Head Unit” below.Programming Transmitter to Power Head Unit1. Press the PROGRAM button located on the garage door motor head unit once. The PROGRAM STATUSlight on the motor head unit will turn on and remain lit for one minute, indicating that it is ready to learn theTransmitter code.2. Press the same button on transmitter as you did in “Changing Transmitter’s Code” above. The PROGRAMSTATUS light will turn off indicating a successful learn.3. Press the same button on the Transmitter once more to operate the door.4.If you are unsuccessful in programing the transmitter to the motor head unit or if the button does notoperate the door or if you wish to program another button to operate a different door, you must change thetransmitter’s code.BatteryIf the LED does not turn on when button is pressed, replace battery.

I purchased this remote as an additional one for the Wayne Dalton Quantum 3213 system in my garage at my apartment complex.This remote is actually of higher quality than the original Wayne Dalton system remote! The casing is made of better materials, the control buttons are less “sqwishy” in just the right ways and the visor clip has just a little wider clearance in opening to accommodate a sun visor (fitting my CR-V’s perfectly). Upon testing the remote it seems that the remote opens from a further distance…though it could just be the fresh battery 🤣.Pairing-wise it couldn’t have been simpler.I pressed the “Program SW” button on the system head, watched the LED light up on the head and pressed one of the remote’s opener pads. The LED light turned off and the remote was paired. I pressed the remote button and the door opened. It literally took 15 seconds to pair. It took longer to set up the step-stool.The product description states that the remote has a coin battery, but the one I received was a 9 volt (which I preferred anyway).

Works perfectly fine once I got it paired with the garage door opener. Almost gave up until I read Dan B’s review stating. “NOTE: You must change the transmitter’s code before programming the transmitter to the motor head unit.” Once I follow these instructions, I was able to pair.