Acrylic Transparent Mini Ant Nest Glass Nest Tube Farm Experiment Small Colony Feeding Area Ant Observation Science 50x50x50mm

Bought this for a little founding colony of camponotus chromaiodes. They're a very slow growing species so this should be good for them for some time. Just put it all together and had zero issues. Biggest annoyance was peeling the protective flim off the panels but that was very minor and I appreciate the protective layer for shipping. For what you pay, this is a great setup for bigger ant species in their founding stage! Not sure I would trust it with tiny species.There are no directions included, but it's easy to put together if you just look at the product picture. Tabs insert into slots and then you slide on a silicon ring to hold it in place. It comes with extras plus an extra nut and bolt for the lid if you happen to loose one. Test tube fits nicely in the rubber grommets, both for the back stand and for the insertion into the tiny outworld. Rotate the test tube side to side as you gently apply force and the tube will slide right in! I can pick up the outworld and the test tube doesn't budge. I would still support both for safety, but I'm impressed with this little ant nest!

The media could not be loaded. Perfect little setup for my setup. No instructions included, but pulling up the ad on Amazon helped me get it fully assembled on my 3rd try. The protective plastic film is a pain to remove without scratching the acrylic, so be careful where you scrape up a piece to try and grab with tweezers. It would have been better if the included test tube had a water port, but the regular tube isn’t a deal breaker. Very stable, snug fitting connections, 5 extra assembly bands and a spare bolt/nut “just in case” … very appreciated by my clumsy meat hooks. Well worth paying $3 more than that mistake that probably popped up in your search. I will be ordering many more to house many queens. Thank you Dellmao, keep up the good work

Nifty little setup; definitely more than I could put together myself with similar materials, especially when taking the price into consideration. I caught a queen in early spring this year, and upon setting up the tube with cotton and distilled water and connecting it to the little 'outworld', I popped her in and she settled right into her new digs. Now, as you can see in the pictures, she has a few workers and additional eggs!A few points, starting with the pros:- Nice and sturdy. I can pick it up from either side, and the tube absolutely does not move.- The pieces fit tightly together, with bands to hold them in place snugly. These also act as gap-fillers of sorts.- None of the material is porous, so you generally don't have to worry about mold.Now for the cons:- Does not come with directions. This wasn't an issue for me, but if you are someone for whom looking at a picture or diagram and assembling something is an issue, yeah.- The "lid" is not held in place by anything. You may see screws in the photos, but those are just to secure the mesh screening. That lid pops right out. Not that you'd be handling it roughly with live critters inside anyway, but it does just sit in the crevice. So, be careful when handling the enclosure as a whole.- The grommets that surround the tube are extremely tight. This is is good for the construction, but I definitely would not let a child (or an impatient adult) install these, as they're going around a glass test tube, and if you were to force them, the tension might shatter it.- Definitely not for tiny ant species. Though fairly tightly sealed, there are definitely cracks where very small species - especially larvae of same - could get stuck and injured.- It doesn't come with a cover for the tube. The tube setup is recommended because it is supposed to simulate a burrow underground that the queen digs for herself to lay eggs in darkness and quiet. I simply used a piece of foil, loosely wrapped around the tube, so I could move it easily without disturbing her, and so I could easily check in on her to see how things were progressing.- The tube being secure and snug is sort of a double-edged sword. When I went to check on her and her contingent of workers this week, I saw that the water in the tube was running low. For a few days I kept putting a few drops of distilled water on a cotton wad in the outworld, as a stopgap, but I finally just bought a formicarium for them to move into. I was afraid moving the tube too much would disturb the budding colony, and even so, I didn't want to risk drowning them in the process of adding water.Overall, I do recommend this if you're looking to temporarily house a queen if you don't want to break the bank on a founding formicarium, but also want more than just a test tube setup. Just don't expect a lot of frills - like instructions.

I recently purchased the YQSDG Acrylic Transparent Mini Ant Nest Glass Nest Tube for an ant farm experiment, and I must say that my experience with this product was quite disappointing. Here are the reasons why I found it to be a poor choice:1. **Size Limitations**: The dimensions of this ant nest (50x50x50mm) are quite small, limiting the space available for ants. This can be problematic if you intend to observe a growing ant colony or conduct experiments. A larger nest would have been more suitable for housing a healthy and active ant colony.2. **Lack of Accessibility**: The design of the nest made it challenging to access and observe the ants. The small entrance and limited viewing area hindered my ability to see the ants clearly and monitor their behavior.3. **Fragile Construction**: The acrylic material used for this nest felt fragile and prone to cracking or breaking, especially if not handled with extreme care. This raises concerns about the long-term durability of the product.4. **Inadequate Ventilation**: Proper ventilation is essential for the health of ant colonies, and this nest seemed to lack adequate ventilation. Poor airflow can lead to issues like mold growth or suffocation of the ants.5. **Limited Features**: Compared to other ant nests available on the market, this product lacked some essential features that enhance the ant-keeping experience, such as removable chambers, water reservoirs, or connectors for expansion.6. **Inconvenient Setup**: Setting up the nest and providing food and water for the ants was more challenging than expected due to the limited space and design.7. **Cleaning Difficulty**: Cleaning and maintaining the nest proved to be cumbersome because of the small size and lack of accessible openings.8. **Value for Money**: Considering the limitations and challenges I encountered with this ant nest, I felt that it didn't offer good value for the price.In conclusion, the YQSDG Acrylic Transparent Mini Ant Nest Glass Nest Tube for ant observation and experiments was disappointing due to its small size, limited accessibility, fragile construction, inadequate ventilation, lack of features, inconvenient setup, and cleaning difficulties. It may not be the best choice for those looking to create a comfortable and accessible habitat for ant colonies. Exploring other ant farm options with more practical designs and features may be a better choice for your ant-keeping or observation needs.