Victron BMV-712 Battery Monitor

Q: I'm a total tech illiterate, does it come with everything one needs to fully install the meter or one has to purchase other things as well? thanks

Hello, C. As I recall, everything you need is included. You will have to connect it to your battery bank, mount the shunt nearby and run the included wire from there to the monitor itself. There is probably a .pdf on the Victron website that has everything you will need to know. It's a very well made device and worth the higher price. Best wishes!

Q: My house batteries are up under my E-350 van, and are therefore exposed to the elements while driving along. OK for the shunt to be down there, too?

There is a RJ-45 connection that is not intended to get wet, so having it in an unprotected location is probably not a good idea, especially if road salt could get to it. If you can bring the battery negative cable into the van, that would be much better, or else use a weatherproof junction box.

Q: I have two 12v 31-series agm batteries wired in parallel. can anyone provide info on how the negative from the battery should be wired to the shunt?

After the two batteries are connected together, the negative from one of them goes to the shunt, and nothing else. The other side of the shunt goes to the negative bus bar, chassis ground, etc. It's important that no loads or charging devices connect directly to the battery negative, otherwise the flow will not be monitored by the shunt.

Q: I have just installed a victron 75/15 mppt & would like to install a display that does both 1) display battery level 2) show solar panel live status

The monitor will show current state of charge of the batteries. You can then scroll to the current inbound or outbound power in amps. The number will be plus showing net power from the panels minus current load. I hope that helps.

4.7/5

Product ID: 364293528

Secure Transaction

Details

Brand
Victron Energy
Item dimensions L x W x H
25.4 x 22.9 x
Item Weight
0.74 Kilograms
UPC
859042007702
Global Trade Identification Number

📊Real-time & historical battery data

📱Built-in Bluetooth wireless monitoring

🔋6.5-70 VDC voltage range

Frequently Bought Together

Victron Energy BMV-712 Smart Battery Monitor (Grey)

Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt

Victron Energy Orion XS Smart DC to DC Battery Charger 12/12 50A (700W) - IP65 Dust & Waterproof - Fully Configurable - Remote Management Possible - Advanced Battery Protection

Description

🔋 Stay charged, stay ahead — the smart battery monitor for the power-savvy pro.

WIRELESS FREEDOM - Seamlessly connect via Bluetooth to your smartphone or tablet and monitor your battery status anytime, anywhere.
SMART RELAY CONTROL - Automate connected devices like battery protectors or generators with a programmable relay for ultimate system control.
DATA DRIVEN DECISIONS - Access detailed historical charts and energy/time remaining stats through Victron Connect to optimize battery usage.
DUAL INPUT FLEXIBILITY - Program an extra input to monitor battery temperature, midpoint voltage, or a second battery—customize your setup effortlessly.
PRECISION POWER INSIGHT - Track battery voltage, current, and state of charge with pinpoint accuracy for smarter energy management.

The Victron BMV-712 is a high-precision smart battery monitor supporting 6.5 to 70 VDC systems, featuring Bluetooth connectivity for wireless monitoring, a programmable dual input for temperature or secondary battery tracking, and a relay for device control. Designed for professionals seeking real-time insights and advanced battery management, it delivers detailed state of charge, voltage, current, and historical data accessible via Victron Connect.

Specifications

Brand	Victron Energy
Item dimensions L x W x H	25.4 x 22.9 x 7.6 Centimeters
Item Weight	0.74 Kilograms
UPC	859042007702 768813157747
Global Trade Identification Number	00859042007702, 08719076037798
Manufacturer	0
Country of Origin	Malaysia
Model number	MONITOR-VTBMV-S
Item Weight	740 g
Product Dimensions	25.4 x 22.86 x 7.62 cm; 740 g
Item model number	MONITOR-VTBMV-S
Item Height	3 Inches
Item Width	9 Inches
Power Source	Battery Powered
Are batteries included?	No

Have a Question? See What Others Asked

I'm a total tech illiterate, does it come with everything one needs to fully install the meter or one has to purchase other things as well? thanks

My house batteries are up under my E-350 van, and are therefore exposed to the elements while driving along. OK for the shunt to be down there, too?

I have two 12v 31-series agm batteries wired in parallel. can anyone provide info on how the negative from the battery should be wired to the shunt?

I have just installed a victron 75/15 mppt & would like to install a display that does both 1) display battery level 2) show solar panel live status

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

€ 532.84

Duties & taxes incl.

Portugalstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

View all Trustpilot reviews