Elkay D23322 Dayton 33" Drop In Double Basin Stainless Steel Kitchen Sink - 3 Faucet Holes

Perfect fit to replace the original sink in my older mobile home. looks good. really updated the dated look of the kitchen

Works great

Pros: This product has clean holes, good edges, and standard 3.5" drain holes. It seems to accommodate a garbage disposal with no deformation, and arrived in good condition due to solid packaging. Cons: The attachment system is not user friendly because it is manufactured with a tiny black common slot instead of a larger phillips head like the old sink used. This is brutal to see and work with against the black clip it secures, and you will need a strong work light or you can surrender any hope of getting this thing locked down. The clip system does not slide freely in the groove, and may even fall out at some points in the groove because of the way the groove is fabricated. The length is 33", but the width is not standard; the old sink was 22", and this one is a little more than 21", so double check measurements. It came up as a result in my search for a 33"X22" sink. I was still able to make it fly, but installing this unit was much harder than it should have been because some bean counter was trying to save a dime on the clip system.

We replace the flimsy plastic sink in our travel trailer so it was a great upgrade in a limited space. The SS material is an attractive brushed finish and seems sturdy. As for ease of installation, I did have to enlarge the cutout slightly which was easy with the right tools.. The small clamps that fasten the sink under the counter work well but we’re a challenge in some areas due to the tight clearances and my large hands…not a fault of the sink. The drain holes are a standard size and spacing so the original drain plumbing fit perfectly. The three faucet holes are also standard size and spacing. We are pleased with the sink. The only slight negative was one corner was slightly raised because it was sightly bent upwards. Being a perfectionist, I could have lived with it and no one would likely notice but I couldn’t, so I used a protective rag and a pair of pliers to carefully eliminate the issue. Not worth taking off a star.

Good

The finish on this stainless steel sink has been very disappointing. Water spots continulesy. I've tried vinegar, baking soda and vinegar, dawn dish soap, Never-dull, stainless steel polish... I just have a sink full of water spots. Yes, wiping it EVERYTIME helps, but I shouldn't have to do this everytime I use my new sink. PS: I worked with stainless steel in my job as a sheet metal mechanic. This has been the hardest stainless steel to have a nice finish to it. Another note: Information on sink says it's 33" x 22" x 7-1/16". Thought we'd be able to take out the old, and put in the new sink in the old opening...nope. Had to cut out at least 1/4"-1/2" on the sides for it to fit. Also, our Dish Drying Rack doesn't fit flush in sink... The new sink has very radius corners, and drainer doesn't set flat in the bottom of sink any longer... My old sink finish was so much better... This sink was one of very few that sold with one faucet hole, which is what we needed.

Perfect!

Bought this to replace a worn out, nasty old looking sink in our kitchen, this sink is deeper than our old sink, was easy to install, although we had a handyman install ours due to we have severe vision issues, and I just couldn't see to install it. Took our handyman to install it in very little time. It has a nice depth, and looks much nicer than our old sink ever did. I can recommend this sink. It is made of stainless steel, so no doubt it will hold up for years, be easier to clean than the fiberglass piece of crap sink that was in there before.

Measurement where correct in the description so fit was perfect, decent finish looks great.

Parfait,très satisfait

I ended up getting this sink for free, because it arrived busted up in two corners and missing some parts (plastic bag with screws was cut open before). As it is only a temporary fix I don't mind too much how it looks. Mounted it with the remaining retainers and added the faucet. The material is so thin, that the faucet is leaning forwards as the sink is dropping down about 1cm without having anything in the bowls. I will make sure the next time to get a sink that is made of thicker material. Lesson learned. But for what I need it, it is ok.

This sink is the worst sink i have ever used. You will see in photos the bottom is not level at all. It s too rounded, all around which leaves no place for dishes and cups at once. and it is a very dull stainless. No shine at all. I hate this sink, i can t even fit a 10 " medium frying pan to soak in it. I m sorry but i do not recommend this product. It might be okay for a country cabin but that s all. Check in photo a bowl of water how unlevel this sink is.

En la descripción indica que Elkay usa calibres de lámina de hasta 18, sin embargo este item es calibre 22. La tarja en $2,600 estaría a buen precio para calibre 18, sin embargo es cara para ser tan delgada.