Replacement 8.4" Uconnect 4C UAQ LCD Monitor Touch-Screen Navigation Compatible with 2017-2020 Jeep Chrysler Dodge Ram 1500 2500 3500 LA084X01-SL01 LA084X01SL02

2018 Jeep Compass with navigation and WIFI... Looks perfect like OEM. The factory screen had a problem with the phantom touches and radio stations randomly changing and the source changing. Along with what looked like a bubble under the screen. When you go to change your screen be careful of the small wire hooked up to the metal bezel around the screen, it's attached at the bottom of the bezel. You will notice that this screen only comes with 1 strip that you connect, but just remove it from the old screen and put it on the new one. Now you have both that you need. This is gonna sound crazy but it actually took me longer to get the plastic radio bezel removed than it did for me to swap out the screens. I kept pulling and pulling on it and was afraid it was certainly going to break with as much force as I was using. But after 10 minutes or more I finally worked it enough to get it off. Wish I would have known this was so easy to fix, I would have done it a few years ago. But now I know. Tools needed are a Torx 20, phillips screwdriver and a plastic pry tool to get the radio bezel off the dashboard. That's it...

I used this screen to replace the broken one on my 2018 ram 1500. took less than an hour, pretty easy. Check out youtube to see how to do it. highly recommend. screen works great now. Just be careful once you remove the system from the truck. The antenna wire has to be disconnected and reconnected.

Bought as a replacement for my 2018 Ram. Removal of screen was very easy and installation was just as simple. Would recommend this upgrade if your screen is delaminating.

Amazing product, my screen had water damage after the detailing and strart flashing. This screen works great. Thank you

Product was exactly as it was described, was very easy to install and has better quality than the original.

A-1 service. Saved me from putting in whole new $1400.00 center. 2 thumbs up.

This was the perfect fix for my wife's Jeep. The display is very crisp and clear. We both feel it is better than the original display. After watching a video on how to take it out and swap it, I had it replaced in 20 minutes. Stellantis (Chrysler) should be ashamed for not taking care of their customers and standing behind their product.I saved $1300 from what the dealership quoted me to replace it.

I've always installed my own car stereo systems, going back to the 1970's. This was the easiest, fastest, and most trouble-free upgrade EVER. Replacement screen is crystal clear - something I have never seen before in my 2017 300c (bought used, 12K miles in late 2017 and screen already had quality issues!).Replacement is simple - pull the climate control panel, then the bezel around the display (these are snap-fit) and remove 4 screws around the display. Unclip the 6 cables and the head is in your hands. Carefully spread the clips on the black metal bezel and flip it to the side (it has a wire connection, so use caution). Unscrew the 6 long screws to remove the display and then unclip the flex-cables. This is the only possible fiddly step - I carefully slid the edge of a razor blade under the handle and lifted enough to get my fingernail underneath and open the latch. Swap the display, re-attach the two flex cables, and reverse the disassembly process. The entire process of disassembly and re-assembly took about 20-minutes.If you don't hear any audio after replacing the display head, DON'T PANIC! Close and lock the car, go put the screwdriver away (wait like 90-seconds, actually). When you come back and unlock / start the car, the audio should be heard. No need to remove the battery or fuse as a first step.4-stars overall only because it's only been in service for 30-minutes. I'll update this after some more time with it. High marks for initial quality of display, perfectly centered images, and ease of install.