Zip Tie Adhesive-Backed Mounts 100Pk. Professional-Grade, UV Black Cable Tie Bases, 1.1 x 1.1. Screw-Hole Anchor Point Provides Optimal Strength for Long-Term Durability & Use and Clutter-Free Cables.

I would just like to say this company has some of the best customer service i have ever seen. I originally got these in black and they worked pretty well, but they aren't EXTREMELY sticky, so do be warned. They do the job pretty well, holding up to probably 3 pounds or so. Eric, The VP of Customer Delightment, as he is called, reached out to me over email and asked if i had any issues with the product. I mentioned that they were great but just not quite as sticky, he offered to send me some of the same ones in white just to see if they would work better for my purposes. Well as it turns out they are not quite the same, the white ones are about 50% bigger in diameter. Because of the additional surface area, they are more sticky and did in fact work better. I would just like to thank Eric and Bargain Masters for their help and amazing customer service.

Just to be straight, never intend for the Sticky Backs to be the only way to secure them to the wall, but the sticky is great to put it in place, stay and then secure with a sheet-rock screw. They only accept the small narrow zip ties but they are perfect for the network bundle I am securing. If I needed regular sized, then I'd buy the larger ones. The self adhesive sticky backs are very sticky and do not come off easily. Overall, strong and durable with screw hole, shouldn't go anywhere at all.

I purchased these to secure a surge protector, 3 power cord bricks and a lamp cord underneath my desk. My desk is positioned in the middle of the room so I needed to clean up the unsightly wires. I used the adhesive backs but I also used a #8 3/8" screw and these zip tie mounts worked perfectly. The screw is short, so choose according to your project. I didn't want to chance screwing to far into the top of my desk from the underside. I also purchased zip ties in several lengths.

The quality of the mount is good - there are however a couple of points to make...A - there are questions about using a screw to secure the mount to the surface - I suspect that if the surface were a clean, smooth surface that the built-in adhesive would work OK and may last, but my experience is that most adhesive mounts break down after a long time and loose their "stickiness"; also, if you mount to a more porous surface or such as wood (like I did) the mounts will not stick well - so, use a screw if you can...a flat head #6 works well, but, be sure not to torque the screw down too much or the head will go through the mount...using a #8 flat head may work better, but then the head will not get flush and will interfere with the clearance for the tie-wrap...B - if you are securing something of a relatively large diameter, say a 1/4"+ wire, the mount will work well, if however you are using it to secure something small or a few things small (e.g., 1-to-a-few single conductors like #22 or #18 wires), then you cannot get the tie-wrap snug enough to securely hold the wires from moving in the mount - this is an issue with most of these mounts...

Just what we needed. Great product.

After working with the supplier, my issues were resolved. In the end, a few batches had an issue, but from what I understand and what about half of my batch had shown, was that this issue was taken care of.Excellent company to work with as well!These work as designed but are nearly impossible to install because the adhesive covering is extremely difficult to remove. I had to use needle nosed pliers to peel up the light thin backing and ripped off a corner of the adhesive pad on every one. Just a total pain to use.

Poor adhesion, even if the surface is clean and flat. The only surfaces I've had success with is a TOP surface where I had gravity help and no strong forces pulling it off. Look for something with 3M adhesive.

I needed these for an over the loo shelf. Living in California, some type of seismic restraint is preferred for such a tall shelf and I prefer adhesive since I live the apartment life. I went through about 10 of these stupid things, destroying them in the process, just to lift the covering from the adhesive so I could attach it to the wall. So the adhesive is fantastic, but that’s about the only great thing about these. Getting it off without destroying the thing is difficult. I probably wouldn’t buy again.