Front Lip ,HengJia Auto Parts 2.5m/8.2ft Car carbon fiber front lip,Front Bumper Lip ,Carbon Lip ,Side Skirt, front lip spoiler 100% waterproof protection(Carbon black)

Very nice kit easy to do if u know what u doing, recommend drilling it

OK 1st off the problem with this thing is that I really genuinely wanted to love it one it does not say samurai on it it's just carbon fiber color. To the eat it provides for screws to attach it. The problem with that is that there is adhesive also but it only lasts for about 5 days. So the moment you put it on it will look great but within a week it will be sagging down everywhere. I added about 10 more screws and it still sag in between each screw. I put it on a Porsche Panamera and and looked cool at 1st but I had to rip it off within 2 weeks next time I will buy something that is made out of hard material double not sag due to basic I. Understand that it is summer time but this is a very temporary purchase and should only be used if you expect it to look good for a couple of days. Don't waste your money find something that is made of hard plastic not rubber that has poor adhesive

Definitely looks decent, but the 3m tape is incredibly lackluster. The first one I installed fell off within a couple days. I contacted them and they sent a 2nd one out and this time they included tapit screws, which I suggest buying at just another 20 before installing this lip. Every 3-4 inches install a screw, and make sure to do it in key places like the corner of a turn, it if the lip has to go up or down to follow your bumper.It's fairly stiff material, but not so stiff that it'll not bend do to high speeds on the highway.Overall decent product, but definitely could use some improvements/include 20-30 tapit screws off the bat.

Installed on a Subaru Crosstrek. Be advised that it has an obnoxious chemical smell upon opening. Just lay it flat in an unoccupied room for a few days. The smell mostly goes away. The installation instructions were in Thai. Lol But there are pictures tho.Had to clean the underside well with wipes/soap/water/alcohol. The cleaning may take a few rounds, but very important. It won’t stick to a dirty surface so don’t get mad if it falls off later on bc you’re too lazy to spend the extra 5-10 minutes to really clean the underside. (Just saying.)It comes with two adhesive promoters but it should have come with 3. They dry out pretty quick, but are essential for the adhesion process.It does take some time to measure and cut out the “triangles” for the bends. I just used a pen to mark on the red tape to guesstimate where the bends are and marked the triangles from there. Also, you’ll have to force the lip to bend. The lip is rubber, it’s not all that elastic.Would also recommend utility scissors to cut the triangles too. The rubber is thick enough that I’m not sure normal scissors will get the job done. I had to use two hands to clomp down on the scissor handles.It’s been 3 days since the lip application. Hasn’t fallen off so that’s good. Also haven’t used the screws yet but will probably put them on. Haven’t braved sending it thru a car wash just yet so may have to send an update for that later on.All in all I like it so far. Considering buying two more for the side skirts IF the front lip lasts thru a car wash. Lol I do like that it’s rubber bc cracking a real lip kit would make me cry.*Update (4/3/18): Front lip still on after 4 automatic car washes and a couple of thunderstorms later. Still haven’t gotten around to putting the screws on either. 👍**Update (2/4/19): Front lip still on. Eventually had to add 2 screws to one of the bends bc it was starting to fall off at the ‘corner.’ (This was the same place I had to cut “triangles” to make it bend.) The screws were recently installed in Jan. 2019 so the lip held up well with all things considered.Sadly the front lip had an unfortunate run in today with old debris from a blown tire. The car in front of me kicked it up so fast that I didn’t have time to swerve or brake safely at highway speeds. Poor car took it like a champ. =/Oddly enough, the lip is still on. However, the center portion of the lip split horizontally right where the lip and adhesive part meets in the middle. Will probably have to replace it eventually as rubber will degrade making the gap even longer. However, I will be purchasing another three once it’s time. I’ll redo the front lip but also add side skirts.***Update (03/05/20): The original lip is still on! The adhesive is wearing off on one end near the wheel well, but not bad for 2 year application. Got lazy and used Velcro to keep it on for now. The split in the middle has widened, but still safe to drive with. Ran this thru the car wash well over 30+ times. Some of the carbon fiber graphics has worn/scratched off, but still decent shape with all things considered.

I bought this because I didn't feel like spending $350 for a "real" lip, because for an appearance mod I think that's just ridiculous. So I figured what the hell and bought this, not expecting much.I'm glad I read the reviews, because the adhesive is definitely not enough to hold it on its own after installation. Do yourself a favor and go spend like $3 at your local hardware store for about 15 more self tapper screws and washers. Also be sure to clean the underside of your bumper very well before you stick it on.It's super pliable and easy to cut. I let it sit in my garage for a couple days to let it settle flat (it comes rolled up in the mail). Didn't even jack up my car or put it on ramps to install this thing either. Just started on one end, stuck it on, and went all the way around. Then I used a stubby Phillips screwdriver and put in 15 screws with washers and I was very very surprised with the results.I think it looks awesome, nice subtle addition to add some aggression to the front end, and honestly, it looks way cooler than I thought it would. I've already had a few friends ask where I bought this!I've only had it on a couple days, but it has shown no signs of wear or tear, and hasn't come off at all. I did a little highway pull to 110 to make sure it wouldn't fly off and again, no signs of wear or peeling.4 out of 5 stars because the adhesive alone is definitely not adequate, and it really oughta ship with 15-20 screws. But that's it. The quality of the vinyl is terrific, nice and thick. The faux carbon fiber looks fantastic for the price, and it was one of the easiest things I've ever installed on a car. If you want something cheap and east to make your ride a little prettier, I highly recommend this. Just don't expect this to add downforce, because it purely is for looks.

Replace my bumper due to car accident. Before this item I had ez lip pro. So I decided to go with this product after installing my new bumper. Clean my bumper really good before installing this product I even use alcohol. Still came off after 2 days. I didn’t like the way my car looked. EZ lip pro gives a better look. More expensive but better look and better glue.