True HEPA Air Purifier for Home Large Rooms 1,050 Sq Ft Air Filters Up to 99.97% PM2.5 Sensor Display HomeKit Over Thread (HomeKit Hub Required) Smart Air Cleaner ( Purelle AP2)

The product is a small fit for a room or living room. It works with UAE voltage fine. Homekit setup is easy and fast. Homekit, in general, has limitations for purifiers, so don’t expect to see a lot of features. The device has one sensor that allows you to automate turning on and off if the weather quality is excellent or less. You can also enable Auto Fan in Homekit automation, which allows the purifier to start in Auto Mood. For noise, I didn’t notice any unpleasant noise even when it turned on while sleeping.The home kit is only enabled and will not appear on Amazon Alexa. The sensor is measuring only pm2.5 . No CO2 or VoC sensors.The design is elegant and very modern. Overall is an amazing device. It may need additional sensors to detect CO-LEVEL and trigger automation.

Over the past two years; my two Airversa Purelle air purifiers have maintained clean breathing air in my home every day, working extra hard to combat exterior pollutants during the Canadian Wildfires of 2023 that brought dangerous AQI levels to our city, and throughout our recent move to a new city’s heavily populated and polluted downtown. When it came time to change the purifiers’ filters, I decided to upgrade to Airversa’s newest True HEPA PRO Replacement Filter Set, which filters up to 99.99% of fine particles in the air.While the difference between the Airversa HEPA PRO air filters with 99.99% filtration efficiency and the Airversa HEPA air filters with 99.97% efficiency might not appear much different on paper, in reality, a filter that removes 99.99% of dust, smoke, dander and other hazardous particles is capturing not only more, but also smaller sized elements than a filter offering 99.97% efficiency. These even smaller particles are considered more hazardous to human health as they are too small to be trapped by our nasal system’s natural filters. This allows smaller particles to more easily reach our lungs, and in turn our bloodstreams, which can create a risk of impact on health. Living with multiple pets in the downtown of a large metropolitan area, upgrading to more powerful air filters that capture more of the hazardous particles present in the air that enters our home was a no brainer.After understanding how much the HEPA PRO filters benefit the my home’s air quality immediately gave me an impression of lighter and cleaner air after swapping out the old filters, but the substantiated proof came shortly thereafter while cooking, when the smoke from a fry pan’s high heat sent the air purifier’s PM2.5 sensor levels soaring. The subsequent speed at which the new HEPA PRO filters tackled the high PM2.5 levels and brought them back down into single digits was noticeably faster than the previous filters, bringing me peace of mind that my new Airversa HEPA PRO filters will continue to protect the air inside my home — at an even higher rate of purification.

Airversa AP2 is my favourite air purifier!I work from home and this air purifier is my saviour. I turn it on and it ensures my air is clean as it purifies my office/workout room.I have a Dyson TP7 and Smartmi P1 in other rooms and let me compare them all to this Airversa AP2.They all do pretty much the same thing, filter out the bad particulates in the air, such as dust, smoke, bacteria, mould/spores and viruses. All have HEPA 3 stage filtration and PM2.5 sensors but they don’t all work as well as you might think.Air filtration: all 3 devices work great in this area however I have found both the AP2 and the P1 work much faster at clearing the air, and are not as noisy as the TP7. The P1 and TP7 can also use its PM10 sensor for even more things like dust mites and pet-related allergens.Reminder these are not air conditioners nor are they really ‘fans’ despite them having fans to suck in and push out purified air (with the exception of the Dyson TP7)Applications - iOSAll have great apps, they show the statistics and allow you to see the level of particulate in the air. They can change the speed of the fan with levels 1-5 usually, But AP2 does this best with a ring light on the top of the unit that shows you it’s traffic light type air quality system, green being excellent air quality, and you guessed it, Red being bad air quality. The AP2 app also shows this ring so you can see it wherever you are in the house.P1 also has a version of this on its unit however it’s not as noticeable.TP7 app is Dysons main app and it’s great at showing you what each sensor means and also integrated outdoor data but it is cluttered in my opinion.Connectivity options -Wi-Fi or Thread?Thread wins for me, this is a new connection that can be used if you have a HomePod Mini or Apple TV 4K and the AP2 has thread built in. Why thread? It’s super fast! Watch the video of just how fast Siri turned my Airversa AP2 Air Purifier on! Instantly!AP2 and P1 are also natively HomeKit enabled, AP2 via thread and P1 via Wi-Fi.The TP7 and P1 both use Wi-Fi, however Dyson does not natively support HomeKit (I however use Homebridge to have mine in the Apple Home App)Wifi is great however it has much more interference and is not fast to respond to voice commands as suchCost - AP2 wins again.For all the Airversa can do, it’s the lowest cost Air Purifier coming in at around £160~ depending on Amazon discounts etc.Then comes Smartmi P1 at £180 (when I purchased it) but still great value if you can get it lower, they have a P2 out now.And in last is Dyson TP7 at a whopping £499. This is also a fan and comes with other great features that aren’t included in the AP2 or P1. But I would not buy it for air purification only.Overall thoughts.I think the company behind the Airversa AP2 had a few things in mind when making it.Affordability, Apple compatibility and Thread connectivity, being one of the first to market.But mostly just creating a great product that does everything it says on the box! Go check out the product page to find out more and it has 10% off at the time of writing this review.As you can tell I’m a fan of this Air purifier and am glad to have been able to compare it against others I own. I am also a HomeKit fan so that is why I wanted this Air Purifier to test its connection options to work best in my automations etcAP2 specific points I want to cover.It’s very quite and especially in night mode, I can barely hear it, albeit the fans are lower in night mode.It only detects PM2.5 and not PM10, that would be nicer as I have pollen allergies so that extra PM10 filtering would help greatly. Hence why Dyson TP7 is in my bedroom.Sleekpoint app is well laid out an updating the firmware was quick and easy. As previously mentioned it’s got the Air Quality LED ring showing the air quality and all settings from the top of the device can be controlled in app. Most advanced features are only available in Sleekpoint app and not in HomeKit, I hope with a future update we can get more control in HomeKit.The air output is clean and makes the room feel clear of anything in the air, the fans kick in on Auto as and when they need to clean away any particulates.HEPA H13 filters are only £29.99 so really affordable, compared to many others being over £50+I really can’t see the difference in H14 filters, although it support H14 too.If you are not in the Apple ecosystem this is not for you, it does not support Android, Alexa or Google voice assistants.If you’re in the Apple ecosystem I highly recommend this Air Purifier!

The Airversa HomeKit air purifier with Thread is a breath of fresh air! 🌬️ Its seamless integration with HomeKit makes setup a breeze, and the compatibility with Thread ensures a reliable and secure connection to your smart home network. 🏡This sleek and modern air purifier effectively filters out allergens, dust, and other pollutants, leaving the air in your home feeling noticeably cleaner and fresher. 🌿The smart features that come with HomeKit integration are a game-changer. You can monitor and control the air purifier remotely using the Home app or through Siri voice commands. Adjusting the fan speed or checking the air quality has never been more convenient. 📱The Airversa HomeKit air purifier with Thread is a must-have for anyone looking to improve their indoor air quality. It combines efficient air purification with the convenience of smart home integration. 🌬️🏠

I had a Sensibo air purifier which was ok. The problem I have with the Sensibo was the large size, cheap button layout and only 2 fan speeds. I had to get one replaced as the fan became excessively noisy. The in-app subscription model for seeing graphs put me off ! I heard a lot of nice things about Airversa - I was reluctant to purchase this - cancelling my order twice before taking a leap of faith. I didnt have much expectations for it. However I was totally wrong. The built quality is amazing and weighty - the interface on both the unit and app are fab. It is very effective and has a nice status numbers for the air quality. Perhaps what I appreciate most is just how quiet the unit is on a low setting - allowing me to comfortably place it next to my bed and sleep without any annoyances. Expensive YES - but it is one of those few products you buy and get a feel good factor you parted with your hard earned cash and got value for money !!

We put this behind the tv to stop the dust collecting on the electrical equipment and to improve the overall air quality in the room, simple connection to HomeKit, easy automations let you set on/off/fan speed through the home app, however you will need to install the sleekpoint app if you want to see the precise ppm air quality numbers remotely, the home app only shows quality by words, eg excellent, good, bad, etc, you can’t see the ppm in home, but the sleekpoint app does not require your data to function and the ppm is visible on the top of the unit when not in sleep mode. Sleep mode is silent and there are zero lights, perfect for a bedroom! Super air filter for HomeKit integration, we love it!