VonHaus Single Monitor Stand for 13-32" Screens, Monitor Mount with Desk Clamp, Height Adjustable, Easy Assemble Stand with Full Tilt, Rotation & Swivel Arm, VESA: 75x75 & 100x100mm

This was a great purchase for me, it not only improves the look of your setup but also offers some stand out features. For around £20, this product is a great value for money and is strong and well built, the entire arm is made of out metal which adds to the sturdiness of the arm. Pros - Enables you to adjust the height of your monitor if your included stand does not offer this - Swivels 360 degrees, therefore you can position this any way you want, ideal for those who want vertical monitor setups as well - Allows you more space underneath the monitor to place things, you never really appreciate how much space there is underneath your display until you get a monitor arm - Movable mounting arm, allows you to manoeuvre the monitor towards you and away from you as well as left and right - The arm has built in cable management plastic holders, this allows you to easily manage your cables so they are hidden and out of sight. The arm also includes two Allen key holders, which are also the ONLY 2 tools you need to set up the arm itself. - The included plate for attaching a monitor supports 75x75 and 100x100 VESA measurements, thus if you get a smaller or larger monitor, the same plate can be used. Cons - The setup for this does take a little trial and error. This is because if you want to test the height of the monitor to see if it is correct, you need to move the main arm up or down and then secure it, then place your monitor on it to have a look. If it is too low or too high, you will need to loosen the clamp and readjust. - If your table shakes a lot, then the monitor arm will shake as well as it is directly connected to the table. Even subtle movements can cause the display to shake slightly Overall, this was a fantastic product. I take this whenever I need to bring my monitor with me to a different accommodation. My neck used to always cramp up because I would always have to look down as the included stand did not have height adjustment. Know I can adjust the monitor to eye level to improve my health for longer sessions of using my computer. Would definitely recommend, the benefits greatly outweighs the negatives.

The product itself is heavier than expected, but this attributes to the high quality of the parts used. This surprised me considering the price, but I'm certainly not complaining as I am confident this is a product that will last! Assembly was straightforward enough, although parts of the instructions could be clearer. The clamp and pole attaches securely to my desk, and the arm to that. I didn't have any problem attaching my monitor to the arm following that. Both sections of the arm and the pole include a cable tidy, which is certainly a welcome addition. The pole cable tidy also includes 2 holes for the hex keys that are required for adjusting certain parts of the mount e.g. height adjustment and tilt adjustments, so they are always to hand if needed. Movement of the arm feels just right - not too tight and not too loose, just move the monitor about to the position you like. Tilt adjustment requires loosening a screw with one of the provided hex keys, which is easy enough, but this is where my biggest issue lies (which really isn't that big, but it was a little annoying at the time) - After noticing that my monitor was tilting forward a bit, I adjusted and tightened the screw to find it slip forward again. Not by far, it seemed to stop at approx 3 degrees each time (so says the spirit level on my smartphone). On closer inspection, I noticed that the nut isn't quite catching where it should and had to find a thin spanner to fit in the gap to hold the nut still while I tightened the screw futher. Sorted now, but something to be aware of. It wouldn't put me off buying another, that's for sure! Pros: - - Strong, well-made, high quality - Flexible arm for positioning your monitor - Well priced Cons: - - (minor) Tilt screw/bolt doesn't tighten properly without addition tools

When the boxes arrived (I purchased two) I was surprised at the weight expecting something quite flimsy because of the low price. On unwrapping I was impressed by the manner in which the component parts were packed and wrapped in several separate boxes and bags. Assembly is simple enough and the instruction sheet is adequate except with respect to the section referring to the additional large metal disk with two slots cut in it for use on thicker desks. It appears to need you to replace the existing clamp unit by using this additional disk. It didn't make too much sense but as the clamp easily fits on my 40mm thick desk it wasn't a problem I encountered. The construction is sturdy and the welding is good . I had no problems with the powder coating making fitting the screws difficult as a few people have mentioned. When doing up the clamp holding the adjustable arm to the upright pole you may find that you'll need to use something to enable you to get more turning force on the hex key as doing it by hand alone did not get any where near an adequate clamping force to stop the arm from slipping down the pole. I levered mine using a 10 inch box spanner. Overall I'm very impressed especially for under £20 a piece. The only problem I encountered and nothing to do with the unit itself was that one of my monitors used non-standard VESA bolts and none of the comprehensive selection which came with the stand fitted this monitor. The monitor in question is an Emprex for the record but luckily I had suitable bolts in my workshop. Very happy with my purchase.

For the price the monitor stand is fantastic and well worth the money. Solid fit to the desk and sturdy with a 49 inch monitor no problems. Totally recommend

Really good build quality and quite easy to put to together. The cabling system is easy and hides well the cables at the back. The supplied alum keys are great to adjust the height of the arm. Once positioned the arm stays in place though my monitor (21.5") is quite light. 100% would recommend this arm - a bargain at the price I paid.

Satisfaite. Elégant, simple à installer et solide.

Sehr zufrieden – tut genau, was er soll! Ich bin wirklich zufrieden mit der VonHaus Monitorhalterung. Die Montage war unkompliziert, alle nötigen Teile waren dabei und die Anleitung leicht verständlich. Der Arm wirkt stabil und hochwertig verarbeitet. Besonders gefällt mir die Flexibilität – Höhe, Neigung und Drehung lassen sich problemlos anpassen. Mein Monitor sitzt sicher und der Arbeitsplatz wirkt jetzt viel aufgeräumter. Für den Preis absolut empfehlenswert!

Guter Monitorhalter, erfüllt alle Voraussetzungen kann man nicht meckern

bien

Der Tisch sollte nicht zu dick sein, sonst wird es schwierig. Sie hält gut und sieht auch schön aus. Für den Preis gut, man sollte aber vorher schauen, ob die dicke passt. Am besten nur für dünne Tische. Ich hatte Probleme und musste andere Schrauben kaufen.