T-CutT-Cut Headlight Restoration Kit

Easy to use, brought back the headlight on our swift, recommended.

Compared with the price of completely replacing the headlight units on my Clio this is definitely worth the money I’d say. Combined this with some very fine grit sandpaper and managed to get both headlights looking a lot better. They were in a pretty bad state before so the results are not flawless by any means but definitely a lot better. I would recommend being very patient if applying this by hand and doing several coats

I used this on a pair of Ford KA headlights which had become very yellow and crazed. Using a low speed drill and a medium polishing pad gave decent results in around ten minutes each side. There is a shine back to the lights and night vision improved.With more time I would think I could improve results further.So for me, a good enough without the expense of replacing the lights.

I’ve two old cars which need their headlights cleaning on average twice a year - usually just before Autumn sets in and just before MOT time so I’ve used a number of different products.This is one of my favourite cleaners as it seems to clean quickly so less effort and elbow grease is needed.Bonus is you can buy it as a single item if you don’t need the sealant.I’m still struggling to find the best sealant though to make it last.

The polishing paste is really good and cleaned my headlights perfectly when I used it with a polishing disc and an angle grinder. The sealer isn't very useful, it behaves like water and doesn't really stay on the plastic, for the final finish I had to buy some clearcoat wipes.

Light work. Sometimes I make myself laugh.... Because it works on the lights, and using an electric drill for sanding and buffing it was light work. And now my lights work better, much better, than they did.It's a shame it's summer really and I don't need lights so much. So I'm delighted.

Having read some reviews I thought it worth at least giving it a go. I had an advisory on my MOT for a film on the headlamps which was part dirt and part a tint put on by some eejit that owned the car before me...so the lights have never been great. Used the film remover with a microfibre cloth and have to say I am really very impressed. The light on the driver's side doesn't look as bad in the photo as it actually was, I am surprised it passed the MOT it was so bad, the light on the passenger side is after and again does not really show the massive difference after using the product. Each light took about 20 minutes and took the tint, the film, and the dirt off with no trouble at all.Highly recommend.

Absolutely unbelievable difference my headlights look like new!! I have used t-cut products before and have been very impressed and I have to say this was shocking I did not expect it to make my headlights look this good. as you can see from the pictures I have a before and after picture. they used to be extremely yellow and felt very rough now after using the t-cut they are super shiny look like new and feel very smooth. I tried using it by hand first however it didn't really do much so I definitely recommend some sort of electric buffer tool I just used a cheap 12 euro buffing pad I bought from Halfords that attaches to my drill and I done about 4-5 coats on each headlight and each time you could see the difference I just kept going till I was happy with how it looked it only took about 40-50 minutes and they now look new. it's also very handy that the kit comes with a sealant to protect the headlights too. overall I am super impressed and I highly recommend this product it is very good value has everything you need and does exactly as advertised I will definitely buy more t-cut products in the future

Used this on my 2016 CRV and 2003 Explorer. Took out the scratches that another brand caused.

**This photo is taken right after polishing. I'll have to update later regarding longevity of the process.**This is a 2013 Mazda. My headlight problem is more cloudiness than yellowing. Other products I've tried just have the compound but not the sealant. I followed the directions, but added one thing: I cleaned each headlight with 91% isopropyl alcohol for any grease or residue. Not hard or excessive, just wiped it down. This is the most thorough compound, used only once, not twice, to get the cloudiness under control. Each headlight took about 10 minutes.It didn't seem like the sealant was doing anything (it is the consistency of water). So we'll see what happens. If I have to keep doing this, I may have to go with a good old fashioned spray clear coat. Overall, I'm very happy with the results

Generalement un bon client de T-Cut, je suis decu par ce kit. Apres une demi-heure passee sur chaque phare (mais avant le passage du sealant) j'ai encore beaucoup de traces qui ne sont pas parties. Je vais etre oblige de revenir a la solution habituelle de tampons differents grades, a voir...

E' ottimo nel caso di lieve ingiallimento dei fari per fanali totalmente opacizzati necessita aggiungere altro materiale abrasivo

Meine Scheinwerfer am Mazda waren nunmehr 15 Jahre alt, gelblich und nahezu blind. Sie wurden bereits bei der letzten HU bemängelt und ich wäre mit Sicherheit durchgefallen. Neue sind nahezu unerschwinglich und gute Gebrauchte auch nicht billig. Also im Internet recherchiert und mich aufgrund der Menge von 75ml Poliermittel für dieses Set entschieden.Das Set kommt mit 75ml Politur, 125ml Versiegelung und einem Mikrofasertuch. Als erstes habe mit einem Mini-Druckluftschleifer und 3000-er Körnung die Scheinwerfer nass bearbeitet. Der gelbe Schleier wurde bereits damit nahezu komplett entfernt, danach war ein heller weißer Schleier übrig. Mit einem Polierschwamm und der Politur dann nachbearbeitet, wodurch die Scheinwerfer tatsächlich wieder glasklar wurden. Abschließend mit dem Mikrofasertuch etwas Versiegelung aufgetragen. Die Scheinwerfer sehen wie neu aus und die HU war kein Problem.Die Politurmenge reicht beim Vorbearbeiten mit Schleifpapier für 4 Scheinwerfer aus. Für meine 2 eher großen Scheinwerfer war rund die Hälfte notwendig. Die Versiegelung (in der Gebrauchsanleitung mit Dichtmittel bezeichnet) ist deutlich mehr als notwendig. Möglicherweise ist es sinnvoll, öfters mal die Versiegelung zu erneuern und deshalb ist die Menge dabei. Einziger Kritikpunkt wäre, dass nur ein Mikrofasertuch mitgeliefert wird. Wenn nicht mit der Maschine gearbeitet wird wären zwei Stück sinnvoll.Mit Maschine ist das Ganze in rund 15 Minuten erledigt, ausschließlich per Hand dauert es sicherlich deutlich länger.