Bosch Self Priming Kit (Compatible with: EasyAquatak 110/120, UniversalAquatak 125/130/135, AdvancedAquatak 140/150/160, AQT 45-14X/33-10/33-11/35-12/37-13/40-13/42-13/45-14 X)

Works fine no problem with my Bosch Aquatak 100 but you will get through a bucket of water in no time. I don’t understand the reviews saying it doesn’t work.

I bought this for my Bosch Aquatak 100 Pressure Washer so I could use a 25L water container as a water source for washing my car. I live in a rented property so wasn't able to use a hose pipe. Works great, just requires a little squeezing of the tube poking out the neck of the water bottle before the pressure reaches high enough to get a strong jet. Made washing my car very easy as it makes the pressure washer portable for moving it around different sides of my car. Slight leakage from the attachment into the pressure washer but not much, only a bit of dripping. Very happy with my purchase, fairly cheap accessory to get more use out of your pressure washer and make it portable. Probably use a lot less water for the whole job as well :)

This is very handy when you can't connect your aquatak to a tap. It does work but only if there is water in the hosing before you connect one end to the aquatak and dip the other in the water source. I found it easiest to fill that hosing from a tap first and then connect it or, alternatively, pour water into from a funnel or similar. With that done, it can take a short time to get a fully pressurised flow but it gets there and works just fine.

Works really well!Based on other reviews, i made sure there are no air pockets and the hose isn't floating. I used other reviewer's method using tap to fill up the hose, worked perfectly.

Could be handy if there’s absolutely no alternative!I really wanted this to work easily and well but found it a right faff to use! Definitely not as quick and easy as intimated.Set it up as per the instructions to use with an Aquatack 120 but still had difficulty getting it to work.First you have to make sure there is absolutely no air in the hose.......and even then i couldn’t get it to do its thing. I began to worry that the pump in the jet wash unit it itself might overheat. Finally had some success by elevating my water source (a 30ltr container) standing it on a wheelie bin.....only then did it work. By that time I had not a lot of water left so it ran out quite quickly thus meaning I had to repeat the whole afore mentioned process again....deep joy!!!Maybe it would work better with a different model of jet wash? But i won’t be in a hurry to use it again. Could have cobbled the same hose together myself but thought I would be good and buy the proper branded accessory......shouldn’t have bothered.

Took a couple of times to get going but worked well once up and running.Weighted the filter end down in the bucket.Bigger the bucket the better ! But worked very well with my bosch jetwash.Would recommend 👌 bit on the expensive side other than that good product.

Hopeless.Followed instructions the letter, left submerged in a bucket for a minute but noticed a split in the pipe about 20cms from filter end. It looks like the metal clip has caught the plastic hose causing a rip.No pressure, no flow.

It took a while to prime it on the first initial use but after that I was great easy to use.i really takes the stress out of using a hose pipe trailing everywhere. the performance is good no issues so far. Can take it anywhere. The weight is good and the size is ok too Thanks.