Elite ScreensAeon CLR2, 123-Inch ALR Projector Screen, Edge-Free Fixed Frame, 90% Ambient Light Rejecting, Grey Screen for UST & Short Throw Projectors–Indoor Movie & Home Theater Screen, AR123H-CLR2

The media could not be loaded. This ALR screen is the best. Yes a little expensive but compared to AWOLs screen or others its about half the price. Cheapest name brand ALR CLR 3 screen out there. A little stressful setting it up as the screen material is said to scratch easily. It survived unscathed.

I built this in about 30 minutes and was easy to build. The quality seems good but the screen is very sensitive to scratches so be very careful when installing it. Luckily I don't see the scratch when watching a movie and can only see it at the right angle and light. The problem is the image quality. While it does look better than a normal matte finish screen, I would say it still is not good enough to watch with the lights on. I would say buy a $200 matte finish screen and turn out the lights. You will most likely do that anyway.

I have to thank the team at Elite Screens as I originally purchased the wrong screen for my Ultra Short Throw Projector and set-up. The customer service team were so responsive and helpful, advising me on the options and ultimately which screen to purchase. And also stayed in touch with me throughout. The screen arrived quickly, was well packaged and was fairly simple to put together, once you follow the instructions that are provided. Once up on the wall - I went for the 123" Aeon CLR 3 - I was amazed by the quality of the picture. It pops even with ambient light. However it comes into its own when it's dark, the picture is simply epic. There is no light bleed, or light reflection, and works brilliantly just as the team suggested. I can't recommend this screen, and Elite Screens, enough if you have an UST projector set-up, like my Vava.

The plain wall is bettet

I’m very happy with the new screen. Ceiling Light rejection works well. Some wash out from lights and some glare with the lights directly above when turned on fully, but it is noticeably better than without the screen. The packaging and instructions were great and the screen arrived sooner than expected. The photos I’ve included are with my Vava 4K UST and are pretty accurate to how I perceive it in person. With lights on and dimmed a bit the picture brightness is still pretty great.

This is a great screen, well built, awesome picture, paired up with my WeMax 4K UST projector. I would have given 5 stars but there were a couple of things that prevented this.1) The drywall anchors that are included with the product are absolute garbage. I would hope that when you spend this much money for a movie screen, the company could kick in 10 bucks to include anchors that actually work. I'm a pretty avid DIY'er and I have never in my 30+ years as a home owner been so disappointed in a drywall anchor than I was with the ones included in this kit. If you buy this screen, I would recommend not using them and instead use E-Z Anchors from Home Depot, or similar product.2) The 2nd issue, not a huge thing for me personally but maybe for some, was the LED backlight strip that came with it. Honestly I had no idea it included a light strip, so I was pleasantly surprised when I saw that in the packaging. Unfortunately, the instructions for the LED lights that came with them did not match the screen framework of my product purchased, so nothing really lined up. The instructions showed a totally different frame which had an additional piece to it which the lights could adhere to. My screen frame did not have this and there was really no good place to put them given the width of the LED strip. I did attempt to put them on part of the frame where they ended up hanging over the aluminum a bit, but unfortunately, this was just enough of a hang-over to prevent the screen for getting close enough to the wall to have the bracket get into the groove which held the screen up on the wall. So, after messing with it for a short period, I just opted to scrap the lights and hang the screen without them. Good idea on the part of Elite Screens, poor execution.3) The last issue I had was related to the documentation, specifically for how to place and hang the brackets on the wall. There was a lot to be left to interpretation in a situation where interpretation should not have been required. It wasn't clear (to me, anyway) what edge of what item the measurements were to start from. Maybe this one is on me and I just misunderstood things, I am certainly far from perfect or an expert handy-man, but there's definitely room for improvement here..

Came in a timely manner , the assembly takes some real time...the picture quality is a lot disappointing during daylight hours, after seeing the videos on them was nothing like those, had to turn the brightness to 100% to watch during the day using the formovie theater laser projector with it was said this was the best for this projector, also the remote didn't put out a beam for the lights, will be sending a message about this......all n all during dusk n low light conditions its great...maybe l need to build a box around it to help..not sure..just a lil disappointed during the day

I’ve had a mixed bag experience with this product since purchasing it. The screen produces a good image paired with my Epson EpiqVision LS300 at ~ 120”. However after about six months ripples are starting to develop in three of the corners, not enough to be obvious when the projector is on, but noticeable during other times. Technical support is sending additional springs, presumably to increase tension, and suggested I add holes. I was kind of taken aback by this and said I’m not going to modify the product to fix this. However, I’ve not yet received the springs so I have yet to say if it helps or not. My room is climate controlled within the 70s with 50% relative humidity, so, I don’t know. Not a perfect product and not feeling good about the price I paid for it.

Great screen and picture, but installation is painfull! First of all i noticed on video and my screen quality is different - tension points doesn't have metal rings so my by time might get ripped off by sping putting force on a material because holes doesn't have metal rings! Plus i found out after following instructions i got weak tensions or curves over material in the corners (and i cannot find any proper troubleshooting material as video or pictures how to fix it). And last LED package is great but remote and receiver module is absolute crap and get interfere with any additional IR remote signal. I have ONKYO receiver and Optoma projector so if i do any controls with their remotes - my led light keeps changing and all over the place. Also at the installation at the certain angle i noticed fingerprint on a screen at the corners - looks like from manufacturer. Thanks

The media could not be loaded.