4 PCS 50x18mm Luggage Suitcase Replacement Wheels, Rubber Luggage Wheel Repair Kit Heavy Duty Suitcase Wheels Replacement with Screws for Luggage Suitcase (Black)

These wheels are very robust and well made with ball bearings in each wheel making them very free running. Very easy to fit once the old wheels have been removed which in my case was not the easy job as anticipated!

I just finished installing these. The kit came with everything needed for the wheels themselves, including allen wrenches for installing them. The wheels, and axel parts seemed great and were as described. My only warning is that you should measure the wheels on your existing bag (width and diameter), as well as the spacing between the wheel supports to determine the size of axel you will need. Not all suitcase wheels are the same. I measured my wheels, chose this product, and was very satisfied.A word of warning. You may want to check how your current wheels are mounted to see if you’ll want or need any additional tools for the removal of your old wheels. I was replacing 4 wheels on a spinner roller board from Travelpro. A few observations in case it helps others. Firstly, getting the old wheels off was a bit of a hassle. The wheels were mounted with a compression fitting on the original axel. The only way for me to remove the wheel was to use a hacksaw to cut through the original axel.Before I could feel comfortable doing this though, I needed to remove the wheel assembly. This was fairly simple, and only involved unzipping the inner fabric and then using a screwdriver to remove the screws holding each wheel assembly in place. This was a bit time consuming but did not require any special tools, just patience.Once I removed the wheel assembly from each corner, I was able to then remove the actual wheel mount (the part that swivels and holds the wheel axel). This involved a lot of strength, a special screw driver head, and an extra tool to grip the screwdriver for additional leverage to break the screw free. Once started though, this final screw came loose and I had just the bit of plastic that held the actual wheel and axel.Once I had this last piece from each wheel/corner separated, I then used a hacksaw to saw through the wheel axel using the hacksaw mentioned above. It took a few attempts to find a secure way to hold the wheel/axel piece secure enough to saw through but also safe enough that I wasn’t sawing towards my hand. The actual process of sawing through the original assembly was surprisingly easy. I found that between 100 & 150 strokes of the handsaw was enough to cut through each axel. This part of the process probably took 1 to 2 minutes per wheel. It took less time to cut through the axel than it did to remove each wheel assembly from the bag and then to remove the swivel/wheel mount. So, I’d consider sawing through the original wheel axel a fairly minor but important step, especially if you already have a hacksaw lying around.In short, the product itself was fairly simple, seems sturdy, met the description online, and should fit your purposes. Just be sure that you know what size wheel you need so that you get the right part, and give some through to how you are going to remove your old wheels. If your old wheels are attached with axels that screw together, then the whole process of swapping out the wheels should take at most 5-10 minutes. If you have to cut your old axel off, you are likely in for closer to 30 minutes to a couple of hours, depending on the tools you have around and how comfortable you are using them.

Good quality wheels with two sets of axles and screws/washers. Very easy to fit as I had carefully measured what I needed.

Needed some new case wheels and looked at reviews and these were ideal and easy to fit

The wheels on our large Samsonite case had started to degrade with only three days to go before our holiday so ordered these. They were easy to fit once we had drilled out the rivets on the original wheels, replacement was very easy and saved the day. No problems with the wheels during our holiday.

Great replacement for old wheels which didn't last long at all,had to saw through rivets to get old wheels off.These seem a lot sturdier and can be unscrewed if ever need replacing.

My second time buying it, as ordered for another luggage. They are great!

I used these to replace a damaged wheel from my last trip, easy to install