Mr.PowerAcoustic 6 String Guitar Bone Bridge Saddle and Nut Made of Real Bone (For Acoustic)

🪕 I received a natural bone nut and saddle set for acoustic guitar. The saddle measures approximately 72 × 3 × 9 mm, and the nut is around 43 × 9 × 6 mm. My own measurements showed the saddle to be 72.11 mm long, 2.93 mm thick, and 9.02 mm high at the centre, with the low E (E2) at 7.83 mm and the high E (E4) at 7.09 mm. The nut measured 42.97 mm in length, 5.96 mm in width, and 8.65 mm in height. The bone material is dense, hard, and lightweight, which I find beneficial for tone and playability. All parts required accurate sanding, and the nut slots needed to be filed to the correct depth. Everything was in order and I would purchase this item again. ✔️

After a year of using the saddle, I decided to also change the nut of the guitar. I realized that the nut was chipped at one of its corners. Otherwise, the saddle is great just needed a lit bit of sanding down and it fits perfectly on my guitar (43mm). Great for the price, I will assume the chipped corner was just bad luck on my part.

Recently bought an Epiphone DR - 100. An entry level guitar but with a really good action, which made playing quite easy. I bought these to replace the plastic ones which came with the guitar. A good improvement with a slightly brighter sound. Easy to fit without any sanding etc. would definitely recommend

Good item

I wanted to have a go at changing the action on my guitar. The current saddle has settled over the years resulting in bottom E sitting too low. This was a good match for size. After attacking with a dremel it fitted well and produces an excellent tone. I was a little over zealous and took a bit too much off. Bit as a sign to how good I think it is, I'm ordering a second one to try again.Ps. Definitely bone. You can smell it when sanding it down!

Bought to replace worn bridge and nut on Takamine acoustic. Originally bought a "bone" set that turned out to be cheap plastic. Tried this set and they were fine for the purpose. Compensated bridge is a nice touch at this price. Will probably need a bit of fettling to fit but this is to be expected ( bone takes longer to file and sand than you would expect! ).

Real nice dense bone. Perfectly cut string slots.Drastically improved two guitars I have, much more sustain, much clearer tone.Took a little bit of sanding to fit, takes a bit of knowledge of string action etc. This is obvious since each guitar is different but some idiots have badly reviewed this product because of this! If you're expecting to buy this and just have it just fit then you probably shouldn't be doing any work on a guitar in the first place)

Saved the guitar from going in teh bin!