G10 FR4 Sheet Fiberglass Panel, 3D Printer Build Surface Plate Semi-Flexible Sheet, 235x235x1.5mm Yellow

This is an amazing upgrade for my two ender 3D Printers. No more glue sticks, PLA sticks perfectly every time, so much less of a hassle and I use it with confidence. A simple wipe down using rubbing alcohol cleans the surface of any greasy fingerprints. Parts come off clean and easy. The best plate build I've ever used. I'll buy 2 more soon as backups for future use.

I used this material for fins on my model rocket. Worked great. Hard part is cutting it. I went through a handful of scroll-saw blades.The rocket flew to 2443 ft allowing me to get my L1 cert. Yep, it works.

Perfect for using as a 3D print plate! Great adhesion! I won't use anything else again, but will order a few more of these for backups!

This is perfect for my application of replacing a halogen bulb socket base. I especially like the size as it was just enough to practice with several practice bases before the final one for the lamp.

I ordered the 200x300x3.0mm size, and the thickness was actually a bit greater than 3mm, so it was suitably sturdy for my task: supporting an array of large electrolytic capacitors for a high-voltage power supply's filter board. Using a good quality 60-tooth blade, the 3mm thick board cut very cleanly on my table saw, but for cutting the 1mm and 1.5mm sizes I would probably use an even finer blade. This is good material, and I will be ordering more of it in the future.

The sheet came curved, deflected. It cannot be used. How would one use a curved 3d printer bed... Do not buy

For the past several prints I’ve been having all sorts of adhesion issues with my trusty glass bed. Tried everything- re-levelling, different filaments, glue sticks, cleaning with isopropyl alcohol, etc. nothing would work. Decided to give this mat a try and instantly the problems went away. The only time I had one fail was when I was testing to see how far off the surface I could go for the first layer and still get a good print to stick. Turns out, it was decently far.I read that some people had issues removing the print afterwards. I just let it cool and you can actually hear it let loose as the temp drops. Most o had to do was stick the scraper under a corner to pop it off, and that was just because I had the first layer paint extremely close.This thing took care of the adhesion and elephant foot issues, and leaves a very smooth bottom surface. Highly recommend.

They do the job