EZDIY-FAB Moonlight 120mm RGB Case Fan with 10-Port Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control,Addressable Fan for PC Case-6 Pack

Me gustaron mucho, incluyen el hub para conectarlos todos, se pueden sincronizar el RGB por software en mi caso con Aura Sync. No se puede controlar la velocidad por software pero si con el control remoto que trae incluido.

I'm no fan expert, so about all I can tell you is that these fans work, hit the RPM listed, and are quite silent in my custom water cooled PC. 2 of the fans developed a clicking sound after a few months in the system; both of them were in an exhausting configuration where they were at the top of the case. I'm not sure if orientation has anything to do with the issue, but I did want to point that out. I currently have 3 fans on top exhausting, and 2 fans on the bottom as intake. 4 of 6 fans have had no issue thus far. I personally like the RGB set up with the ring around the edge as well as the hub in the center. I haven't done any comparisons against other fans, but my temps have been well within expectance since I first installed them. The RGB hub is a decent size and easy enough to integrate into other RGB ecosystems.Regarding the clicking sound; I reached out to their customer service, and after sending a video of the issue, I received 2 replacement fans at no charge, with no need to send the old fans back, and they arrived within a couple of days. Very happy with the experience overall!

**I'll list pros and cons at the bottom if you don't want to read through**I really didn't expect a whole lot from a pack of 6 RGB fans for $50, but I have to say I love these things! After looking at a ton of different RGB fan sets, I decided on these for the cost, looks, AND they were the only ones with a fan controller that i haven't seen a single review about wires shorting or a fire starting.Unboxing them I could immediately tell they felt pretty beefy. Thick plastic, no flex or blade wobble. The fan controller feels paper light, which is usually a concern, but it's been working perfectly so far.It was easy to install everything, the included screws didn't feel difficult to screw into the fans, the double sided tape on the controller is strong, and there is plenty of wire length for even larger cases.Everything worked without a hitch. The colors and effects are absolutely beautiful, the transitions are super smooth and the colors are vivid, you can also adjust the effects speeds. The remote is very basic, and can take a bit to scroll through the effect options, but it's working perfect. Airflow is really good, and noise levels are surprisingly low. You can use the controller to set the speed to low, mid, and high, and all are pretty quiet. I haven't come across any bugs in the way everything works. And as a huge plus, these do keep your settings after powering off, or unplugging, some of the inexpensive sets don't.I don't really like the proprietary fan plugs, if the fan controller dies, you cant use the fans on anything else that i'm aware of, and I don't think any other fans would work with the controller either. There's also no PWM for controlling the fan speed, it all has to be done with the supplied remote. There's an ARGB header on the controller to sync with your motherboard, but I can't test due to lack of a header on my rig. The fan controller is SATA powered VS molex, which is nice and seems a bit safer thank the molex horror stories i've seen on other units. Even the stickers on the fan blades hubs are installed well, they don't have an annoying wobbly look that some fan decals have when they are applied wrong.In short, i'm pretty blown away with the value here, if I get even a year out of these I'll be really happy.PROS- Solid feeling build quality- Beautiful vivid RGB colors and cool effects- Tons of nice effects- Easy set up- Everything working and no bugs (so far)- 6 fans and a controller for $50!- Great airflow and quiet, nice blade design- SATA power instead of molex- Can hook 10 fans and 2 LED strips to the controller (though proprietary)- Can confirm the fans work good on a radiator- Good wire length- Saves setting on power off and unplugged- Full coverage RGB, has rings on the front, back and sides, and the blades are litCONS- Proprietary fan plugs- No PWM for speed control- If the remote were to break or get lost, there's no alternate way to change colors and effects unless you're using everything synced with your motherboard, and you wouldn't be able to change fan speeds.- Basic remote, works fine but takes ages to cycle through all the effects- Doesn't seem like you can control brightness unless you use a solid color- All fans run the same speed at all times. Would be cool to be able to control different fans speeds separately, like faster or slower speeds for intake or exhaustTime will tell how they hold up, but so far so good! Will update if anything changes.

Bought these to replace the 4 case fans that came with my Montech case along with the two fans on my Deepcool AIO cooler. Easy to install and they work really well. The interior of my case is downright cold when I open the side panel and they are pretty quiet. Would definitely consider using these in another build.

Looks amazing they are bright and color only thing is I can't sync them to MB I have Gigabyte and Fusion won't show the fans.. I have remote #2