Bike NookBike Stand & Vertical Storage Rack With Connector (2 Pack), The Original Vertical Bicycle Floor Stand for Garage, Indoor and Outdoor Storage, Perfect Bike Accessories for Small Spaces

I got a large road bike during the plague and I have struggled for about 4yrs with trying to store it in my room. I tried installing a wall mount with a stud finder and all, and let's just say my wall suffered for no reason. Finally one random IG targeted ad early this week, and my problem was solved!Assembly was somewhat simple, but the instructions weren't exactly easy, but not diffficult either. But once assembled, it's pretty straightforward. I just placed the rack in a small space by my wardrope, and my goodness the room's space has opened up! Wish I knew about this rack 4yrs ago, but better late than never.Price was reasonable, and the minimal design is PERFECT! Definitely a well thought out design for sure!I'm a fan! Thanks for the perfect indoor storage solution!

I was hesitant to buy this, as some reviews stated it was unstable, wouldn't hold a wide tire, etc. I wanted to write this review as a response to those, and help people struggling with whether or not to buy this, based on some of the questions I had. So, here goes....First, this thing was really easy to assemble. Now, to be fair I am a pretty handy guy, but it came with written instructions (WITH PICTURES), and is only a handful of parts. Assembly tools were included, and did the job fine. It took me MAYBE 5 minutes to put together.Secondly, some people complained that it wasn't sturdy. This has not been my experience. Just make sure you get all the hardware good and tight, and this thing is fine. I can get my bike to rock on it a bit if I bump it or push it, but I have ZERO concerns about my bike "falling off of it", as mentioned in a few of the other reviews. I have a relatively heavy mountain bike, and do not feel a need to "tip toe" around it, lecture my kids about avoiding it, or putting caution tape around it. It holds my bike fine until I need to take it down.Lastly, my biggest concern was whether or not this stand would accommodate my mountain bike. I have a 27.5 PLUS bike with Kenda 2.8" tires. It works fine. My tires do not sit "inside the track", but rather on the track. This does not seem to affect the functionality of this stand AT ALL. As mentioned above, it holds my bike VERY securely. It is easy to use, and keeps my bike out of the way.If i had to knock it down for something, I would ding it on "value". I think it's over priced for what it is. I highly doubt that the manufacturing costs, or the raw materials come close to justifying the retail price. However, when looking around for a product that would meet my needs (space available, bike size, etc), there wasn't anything else that would have worked for me, so I was willing to pay it.I hope this review helps someone decide whether or not this product will work for them.

Overall, works well enough.Cons:I wouldn't call it robust, and especially a bit shaky if you have eBikes due to the weight.Directions are OK, if a bit headscratch inducing, but it's not exactly advanced mechanical engineering, you can sus it out pretty easily.The screw/bolts are made out of butter and will strip if you look at them wrong.It can be a bit of a battle if you have a user with a short seat height on a full sized bike (you WILL have to adjust the seat to make it catch).The biggest issue is fenders, if you have a longer length one (Rad Power Bikes for example), they are too long for this to work well. The fender will end up squished under the rear tire and turn into a profanity laced experience.If you have no fenders, or short ones, this seems to work well enough.Overall, it's a good idea, and works well, but be aware of the fender length issue, and be aware that the quality is so/so from a material standpoint.

In brief:This stand is an overall safety hazard made of flimsy materials that is not suitable for a wide range of bicycles, as the description reads, which is also very misleading with regard to "...and lock in place" considering when mounted, the bike is free to fall in any direction at any moment. Detailed review provided simply because I cannot understand the many glowing reviews and after hands-on experience I hope the time it takes me to write this out will prevent a future headache for a prospective buyer (oh, I'm also on CVOID19 quarantine...as you should all be too...so I have nothing better to do, so, enjoy!)..Details:Beware. This is a very unstable stand. Not only that, but it does NOT host a variety of bike's with differing tire withs.; commuter and road bikes will NOT fit, causing the bike to dangerously lean 15+ degrees to whatever side you allow gravity to reign. I didn't want to leave my bike unattended on this stand even while simply standing less than a foot away, prepping myself for certain doom.While the stand did not fall/fail, even when applying a relative amount of pressure, mostly because the leg span is a proper distance to keep its footing, I did note the stand began to move toward the opposite direction of the pressure despite it being put together properly by the supplied instructions. The moment I applied even the slightest amount of pressure on the bike itself, the bike immediately became disengaged from the stand and gave way. I was lucky to catch because I have a very light bike, another qualm I have considering this stand is rated for bikes nearly 3+ times the weight of mine.Admittedly I am no engineer, but I believe the faulty nature of this seemingly sturdy stand is based on where the bolt holes are located in conjunction with where a bicycle places pressure on the stand once assembled and in place. The cheap included hardware may add to the instability all around, because overall constructive integrity is based on all components working together/against each other properly when torqued down to spec.The most disappointing, and possibly most dangers, aspect of this stand, is that the description claims that the bike simply "lock(s) in place" and this is absolutely not true. Maybe my ignorance proceeds me in this case, but my assumption was that there was some type of safety clasp/collar that would 'lock' (as per the description) the bike's seat pole onto the stand to prevent it from falling forward/off of the rack. The bike only rests on a concave nylon post end, which when the bike sways to its awkward vertical resting position, bodes for a very scary sight in totality. Even though I already planned on returning immediately upon unboxing the poor quality components, I tinkered with it for quite a while because I really wanted it to work.Experimentation began: I decided to lower the seat post portion in hopes that if I cantilevered the bike a bit more backwards it would fix and properly align its weird resting position, and provide some stability to both the stand and the bike. By doing this, the rear wheel was forced away from the vertical wheel rest, offering an equally unstable variation. I oscillated through a few different resting height positions to no avail. Other similar products provide various different systems to affix the bike to the stand when engaged (straps, bungees, clips, wheel guides, wheel hoops, etc.) so just, be mindful that this has NONE (not safe around kids/pets, in garages around cars, indoors, etc...bike can literally fall forward at any time).All in all, it is the misguided fitment of most bike tires that causes for these issues to present themselves in a potential hazard, not to mention the bike looks absolutely TERRIBLE when leaning egregiously to one side. So if you have a mountain bike with girthy tires, or a fat-tire cruiser, or suppose you are 'organizing' a slew of bikes in a garage FAR away from parked vehicles, then this stand may work for you, however there are countless similar options, some of which are cheaper, that are guaranteed to be a safer and more suitable product.If you read this review and still order this product, the quarantine has gotten to you, as is evident per this unnecessarily lengthy review I have taken the time to write to prevent YOU from making the same mistake I did.Anyways, it's almost 3AM - time for COVOID19 breakfast #1 before I go take a nap to wake up or numbers 2, 3, 4, and so forth until I decided it's lunch, lunner, and then dinner, intermittent naps all in between of course. This process on repeat...OKAY BYE.

So my bike is a BMX racing bike which means it's typically very small. This bike is pro size, which if you know, you know and it has to be on the smallest setting of this stand. My bike also has a shorter seat to back wheel bar space then a normal pro as well, so regular pros should work just fine. It fits perfectly which is wonderful and it's super duper stable I pushed it around a bit and it seems to be pretty locked in there. Saves a bit of space and now my bike won't fall down when leaning up against a wall and such things which is great. I'm very grateful that they have so many settings because like I said this is one of the bigger bikes you can get in BMX and it is the smallest the stand can go, This probably will not work for smaller BMX bikes as it will not go shorter and I do not believe it will reach the handlebars to lean it up that way unless the bike is super small because the extension of it falls quite short on my bike. The velcro strap you get is to make sure your handlebars don't turn to be vertical while your wheel is horizontal, figured out that one myself. The handlebars lean slightly more back than they probably intended to so you can't lean it right up against a wall but that's fine. The instructions aren't bad to go over, pretty simple and straightforward trying to get the nuts and bolts on was a bit of an interesting learning curve but I was able to assemble it in about 45 minutes (never really assembled anything before) overall a great purchase, My only comment would be to have a greater range for BMX bikes as a lot of people would buy these stands for their bikes if it would fit (BMX bikes can be pretty pricey) and I wouldn't mind a travel sized lighter weight one for when I travel to race.

Got 2 x nooks for shed. Space is at a premium in shed so need a solution that is sturdy, neat and gives floor real estate. Easy to assemble, well made, and holds the bikes in place. Able to keep the bikes together. It works for me, delighted.

facile a monter et génial pour le gain de place

Facile da installare

Sorprendentemente, bien, tengo 3 bicis en casa y antes las tenía puestas en la pared con un plug, tuve que hacer agujeros y tal, parecía bien pero se quedan muy estáticas. Con esto, conseguí no hacer agujeros y poder poner la bicicleta en cualquier parte. Queda bastante recta, se sujeta bien, aunque no le puedes dar un golpecito que se cae, pero si la dejas quieta no se mueve, se sujeta bien, es muy rápido de poner y quitar, y si la enganchas en una pared no se diferencia tanto de un plug con agujero.