ERYONE Glass Fiber ASA Filament1.75mm UV&Weather Resistant, ASA GF 3D Printing Filament Perfect for Printing Outdoor Functional Parts, 1kg (2.2 lbs)/Spool, Black

Way more smelly than any other ASA I've used so make sure you have some sort of filtration or window nearby! Was curious how good it could be since ASA is usually no where near this cheap but it surprisingly printed perfect! Took a chance since I've had good success with other elegoo items so gave it a shot and glad I did! Had no issues with the filament at all! Just make sure you prepare for the smell!

I'm not a beginner at 3d printing, and have printed plenty of harder to print materials including other brands of ASA, nylon, pc, petg, etc - as well as cf and gf filled variations. I've used eryone brand petg-cf and although its vacuum sealed with high humidity (40%+), once I dry it overnight it prints well. This ASA is extremely hard to print with. I've used bed temps from 90 to 115c with both textured and smooth pei. I've tried chamber temps from 40 to 55c, I've dried filament for 24hrs with showing around 12% humidity (lowest it will show). Bed is clean, no issue with other brands of ASA. If Nozzle temps too low layers break easily and too high it warps off the bed.. I've drastically lowered print speed to the 30-50 recommend... on a 3 hour print when it does get a good first layer, less than an hour in and it fails (usually from releasing from bed). I waited too long to try this roll so cannot return... Very frustrating experience from a very experienced user. Used half this roll determined i could get it to work...the rest of this roll is going in the trash. As others have mentioned the smell is stronger than other ASA brands I've tried.

On the QIDI X-Plus-3 which is a fully enclosed, chamber heated Bambu competitor in the high speed printer range. Adhesion: clean PEI bed (occasionally I will wipe the PEI bed with alcohol to remove fingerprint/oil from bed) No other adhesion used. Settings for the ERYONE ASA: (Modification of the QIDI ASA base setting) QIDI Slicer (Prusa) Nozzle: 250 1st layer, 270 other layers Bed: 105 Chamber: 60 (most printers won't have a heated chamber, main reason I got the Xp3) Cooling fan: Off Chamber fan: 40% Chamber cover: On (Xp3 has a lid you can remove for PLA and others that don't need the heat) Pressure advance: .021mm/s Speed: 250 mm/s Flow: 117%. (most important for my printer at least) ASA for 17 bucks is a fabulous deal and it prints great on the QIDI Xp3 at high rates of speeds. If there are errors in the print, it's usually due to a fail in my prep of the surface or printer or in the design. I've used 3 rolls of this so far and will continue to use it as long as it doesn't change quality or price.

Didn’t stick to my BAMBU PEI at 90c. Raised to 100c (chamber 45c) and it works. It’s not the warm tone white, definitely the best you would expect. But for the price, it’s good choice

the best filament ive tried thus far (no glue stick needed, strong: holds 100x own weight under one pixel cube, self-separates from plate after cooling) but need to clean lidar after

This was my first time using ASA but it wasn't bad hotend 260°C and the bed at 100°C at about 25mm/s. I had a little bit of curling but with some adjustments I think I will be doing some awesome prints! Very good adhesion and it looks great, I was ready to fight with a new type of filament but it wasn't bad at all. Highly modified ender 3 pro with sprite pro extruder and enclosure.

This filament seemed to print fine, nothing special but also nothing wrong there. The smell though, that's pretty unique. ASA has a bit of a smell to it when printing, but for some reason this filament turned that up to 11. It stunk to high heaven vs other brands I normally use. I also found it left a lot more residue in the printer to clean up as well. It's a good value but I didn't find the smell or mess worth the price difference in the end.

Sadly this filament doesn't work well with the bambu labs p1s printer. It is too flimsy and won't push out the filament in the nozzle. As soon as it gets there, it bunches up and retracts and tries to reload again.

I have a few different Eryone Products PETG-CF ABS-CF ASA and I then went for this mainly for parts where heat can affect PETG and I have found all the Eryone filament I have that is easy to print and gives a great finish I useed the same settings as I used with ASA and ABS-CF which is 260 ob the nozzle and 100 on the build plate. I do use an enclosed printer (Elegoo Centauri Carbon) which helps I also use an Engineering Plate that requires bed adhesive to release the print and I have never had an issue. MY bed adhesive of choice is Layerneer Bed Weld also from Amazon I dont use glue sticks just find them too messy. I

Heute habe ich zum ersten Mal Asa gedruckt, es war günstig und ich habe gleich zugeschlagen. Die Ersten 2 Drucke habe ich abgebrochen da es leider nicht auf der Platte halten wollte. Das Filament kam dann in den trockner, die Platten habe ich mit Fit Spülmittel gereinigt, hierbei ist es wichtig, dass das Spülmittel nicht nachfetten darf. Danach habe ich noch die Platten mit Iso abgerieben. Ich habe bei meinen Bambu P2s die Bambu Einstellung verwendet. Erste Schicht 0.14, ab der zweiten dann 0.16. Düsen Temperatur habe ich gelassen, nur Bed Temperatur erste Schicht 110 aber ab der zweiten 105 Grad. Den Bauraum hatte ich schon vorgeheizt und mit 52 Grad den Druck gestartet. Das Ergebnis sieht man auf den Bildern, ich finde für das erste Mal ohne Vorkenntnisse ist es top. Jetzt kann es mal an andere Teile gehen. Aber wichtig ist, dass ich mit Eryone erneut richtig gelegen habe. Es muss also nicht immer teuer sein. Das Einzige was mich ein wenig gestört hat, war dass die Rolle so voll war oder schlecht gewickelt, so dass ich eine Menge von Hand abrollen musste, um es in meinen AMS nutzen zu können. Siehe Bild.

Printed amazingly well and clean! Ran it through the drier but was very impressed! Using for car parts so needed to be strong and heat resistant!

Gutes Asa Filament. Muss in geschlossenen Drucker gedruckt werden. Aber dann kann man es mit atzeton Dampf super glatt bekommen

Se imprime muy facil, incluso mas que el ABS. Es la primera vez que pruebo este material, y de momento encantado con el resultado. Nozzle 255°C y cama a 110°C e impresora cerrada. Con un poco de adhesivo en la cama no he tenido ningun problema de warping. Lo he cogido por las especificaciones del material, ya que quiero hacer unas piezas para el coche, y el PLA se deforma y el ABS se vuelve quebradizo. El bobinado es muy bueno y el vacio correcto. Recomendado